Archive | January 29, 2011

Digitizing your own Embroidery Designs Part 3

If you missed Part 2 of this series, you can find it HERE!

Digitizing your own Embroidery Designs Part 3: Creating a digitized design using Bernina Artista Designer Plus Software

(Updated: June 13th, 2015)

As I mentioned in my previous post I’ve tried most of the embroidery digitizing software out there over the last 10 years or so, and even after trying the latest greatest I always tend to come back to my stand by software, Bernina’s Artista Designer Plus. In this post I will take you step by step how I use it to create my own custom designs which are then stitched on my latest sewing projects.

Step 1: Get ready! Get set! Start your software! GO!

Do you have it up and going?

Great! Here we go!

You will notice that when Artista starts up it will be in freehand stitch placement mode where you can just draw stitches or shapes in freehand mode. This is the mode most embroidery software starts in.

picture-5

We need to change it to picture mode so we can load our previously touched up artwork and trace the bitmapped image using the auto trace tool. To do this click on the picture tab up at the top of the design screen. Then click on the icon in the left toolbar that looks like a flower coming out of a folder. This is the Load Picture tool.

picture-5-copy

When the file browser comes up you can select your touched up artwork saved in a variety of formats like BMP (Bitmap), JPG (Jpeg), PNG (Ping), etc. I will be using my Mickey Indy Graphic that I touched up in Part 1 of this blog series. Click on the one you want to digitize and then click the Open button in the file browser and your design screen should now look like this.

picture-8

The next step is to use the built in Artwork Preparation Tool on the left toolbar as shown below. Once you click on it the Artwork Preparation window will pop up and show you the number of colors in your design as shown below. You want to choose an amount of colors that still gives you good detail of the design, but no more than necessary. I never use more than 16, but I usually try to stay around 4-8 colors if possible.

picture-10-copy

Once you choose your number of colors and click on ok Artista will decrease the number of colors and smooth any lines in your design it can. It will also create large single color blocks if possible. This will provide the auto digitizing function with less work to do in the next step.

The next step is to take your prepared artwork and use the auto digitizer tool to insert stitches over your artwork. To do this click on the Design tab at the top of your design window as shown below. Then click on the Select Tool in the left toolbar. Next click on the prepared artwork image on the right. This will select it so it can be auto digitized. To do that click on the AutoDigitizer Tool on the left toolbar. It looks like a paintbrush with multicolored paint on it.

At this point you will see an AutoDigitizer window pop up where you can change your Fills and Details stitch types. I normally leave these settings at their defaults but you can use the different stitch types to create different looks for your designs. Choose your stitch types or leave it at the default and click on the OK button.

picture-13-copy

Now you should see the bar at the bottom showing that the AutoDigitizer is creating the different stitch objects of your design. Once it has finished your design window should look like the screen below.

picture-14

If you click on the Artistic View tab you should now see a 3D representation of your completed auto digitized design as shown below.

picture-17-copy

This is all looking pretty good at this point except you will notice that it automatically digitized the white background of the design.

I don’t want this to stitch so it needs to be removed.

So I click back on the Design Tab up at the top of the design window. Then I click on the object Select Tool on the left toolbar (it looks like a white arrow). Then I click on the edge of the portion of the white background and it will be selected and turn to a pink color to show it selected.

picture-18-copy

Then I just hit the delete key on my keyboard and POOF it’s gone! It should now look like the screen below.

picture-19

You can click on the Artistic View Tab at the top again to make sure you are satisfied with the results. Now make sure and use the File/Save As menu option from the top to save your design. Artista offers several design formats to save to so choose the one your embroidery machine uses. I always save in the PES format since I have Brother machines.

picture-20

That is it! You are all done! Now you can change thread colors or resize your completed design to make it larger or smaller or rotate it, mirror it, or whatever else you would like to do with it using the built in tools.

I hope you enjoyed this blog post series, I sure had a lot of fun creating it!

Please let me know if you would like to see other topics covered or if you have any questions and I will do my best to answer.

If you missed Part 2 of this series, you can find it HERE!