Archives

Franklin

img_4823I laid the four “in progress” amigurumi’s that I’ve been working on for what seemed like forever, the sheep, the ferret, the momma dragon and the black panther, in front of me and tried to pick which one I should complete first.

img_4826As I studied the four projects, my first thought was “I think I’ll start the unicorn pattern I just found on line.” I then had to scold myself and say “NO!” I could not start another amigurumi until I finish these four that I had already started. Of the four, the black panther interested me the most. The panther was a bit of a challenge and was for a friend so he already had a good home to go to, so I got started working again on the panther.

img_4829When my friend had picked a black panther as her favorite animal, I panicked for three reasons. One, I had never seen a pattern for a black panther before. After calming myself down and thinking it through, my first step was to find a pattern. After a few web searches and no luck finding a pattern for a black panther, I altered my search, and started to look for tiger patterns that I could crochet in black. I found several tiger patterns that I liked, but when I found this adorable tiger pattern, I quickly picked it as my black panther pattern.

img_4828The second reason I panicked was the color of a black panther. Obviously, the main color of the panther would be black but how was I going to accent black safety eyes on a black animal so they could be seen? What color should I make the nose and smile so that they didn’t just blend into the face? How about the ears? Was a solid black animal going to look good or would it look like a big black blob? After much thought and looking at many pictures of black panthers, I decided to give the panther yellow eyes, a gray muzzle and accent his ears with some gray yarn. I debated about giving the panther gray paws but I decided to keep them black.

img_4835The last reason for my panic was the fact that this whole amigurumi would be crocheted in black yarn except for the small gray pieces. I have a difficult time crocheting with black yarn. The older I get, the harder it is for me to see the black stitches. This meant that I would have to take my time crocheting this panther and watch my stitches closely, plus I would need to always work in the best light.

Except for working with black yarn, the pieces of the panther crocheted smoothly. Then it was time to stuff the pieces. It is always a bit of a challenge to stuffing dark color pieces with white poly-fil. It takes some time and patience to stuff the pieces firmly but to take care and not stretch the stitches too much revealing the white stuffing underneath.

img_4837Stitching the black pieces together also presented a challenge in both working the black color yarn and having the white stuffing pull through with the stitches. I had to use tweezers to pull single strands of stuffing from the stitches. This was time consuming but necessary. These single strands of stuffing made the panther look messy where he was stitched together.

img_4838This pattern called for the arms and legs to be crocheted so a thread or button joint could be done to attach them, but then the pattern called for the arms and legs to just be stitched on. I debated about doing a thread joint instead of just stitching them on but then decided to follow the pattern. Once the arms and legs were stitched on, they seemed secure and allowed the panther to sit, so I was happy with the results of just stitching them on instead of using a thread joint to attach them.

img_4830Once the panther was stitched together, it was easy to give him a big black smile on his gray muzzle. His name, Franklin, was the first and only name that came to me as he sat in the chair next to me, waiting to go to his new home. During the construction process, I became very fond of Franklin and almost did not give him to my friend, but I had made the black panther just for her and he needed a good home. When I presented Franklin to my friend, she was so surprised and also fell in love with him right away. I know she will give Franklin a good home.

img_4844With Franklin, the black panther, done, which “in progress” amigurumi would be next on the to do list? Stay tuned to find out.

Until then, crochet forth and black panther on!

Hamlet

IMG_4435IMG_4439To be or not to be. That is the bacon I ask from thee.

It was the big eyes, of course, that I fell in love with, and that made the decision to make this pig my next amigurumi project easy.

I started this project by digging through the yarn stash to find just the right color of pink for this pig. I found a small skien of pink yarn that was the perfect color, but would it be enough to complete this pig? Hhhhmmmm. I decided to go ahead and go for it. If there wasn’t enough yarn, I might have to get creative with the colors later.

IMG_4437IMG_4442I knew that if I was going to have to match pink yarn colors later in this project, I would want this pig’s body to be all the same color so I started the crocheting of the pieces with the body first. After finishing the body, I knew the next part I wanted to match colors was the snout, so I crocheted it next, and that was followed by the ears.

By this time, my skein of pink yarn was getting pretty thin, but I crocheted on. The legs were next to be crocheted. Luckily, there was not too much pink yarn used to crochet the legs. After finishing the legs, I was down to a very tiny ball of pink yarn with only the pigs tail left to crochet.

IMG_3895IMG_3890I decided to hold off on crocheting the tail until after I had stitched to pig together, just in case I needed the remaining pink yarn in the stitching process. So, after crocheting the eyes, pupils and nostrils, I got started stitching the pig together.

The stitching together of this pig was a slow process with lots of stuffing involved. Luckily as I stitched the pig together, I did not need any of the extra pink yarn for the stitching. This left me with enough pink yarn from the original skein to make the pig’s tail. After crocheting the tail and stitching it on, the pig was complete.

IMG_4454IMG_3887It was very easy for me to pick a name for this pig. He was named Hamlet early on in the stitching process. As expected, Hamlet is very cute and I love his big eyes. He is now waiting for a good home, preferably with someone who is not hungry for bacon.

Until then, crochet forth and bacon on!

Why I Sew Kid’s Clothes

IMG_0016“So, how many children do you have?” I am frequently asked.

“None” is my reply.

This of course always leads to the next question, when the conversation is about sewing, “Then why do you make so many clothes for kid’s?”

Its a reasonable question and I will give you 3 good reasons why I sew so many kid’s clothes even though I have no children to wear them.

P1030369The first reason is my casual style, and that of the husband’s. I wear mainly shirts and pants/shorts. I basically wear 3 styles of shirts. A t-shirt, a collarless v-neck shirt (a baseball shirt) and a collared camp shirt. I don’t wear dresses or skirts regularly.

P1030399The husband wears tab front knit shirts and on the rare occasion a button down the front shirt both with pants and shorts.

So, over the years I have sewn many shirts and pants for both myself and the husband and I have our basic sloper patterns for these items fine tuned to perfection.

Over the years, I have varied the basic slopers with small changes to the designs, but basically it is still the same pattern I have sewn for us for years now.

P1030970

So given this, how could I learn any new sewing techniques and expand my sewing skills by just making these same tried and true patterns over and over again?

How could I learn different seam finishes? How could I learn about sewing with different fabric varieties like fur and pleather?

DSCN0533Why would I waste my fabric and my time to make myself a dress or skirt that I would seldom if ever wear just to learn sewing skills and techniques like gathers, pleats and linings?

There are no pockets on my shirts or the husbands shirts, so where would I learn to make different pocket styles?

There is no bias tape used in the construction of our clothes, so where would I learn to make and sew items with bias tape?

 

The answer to many of these questions for me is by sewing clothes for children of course!

P1040073

DSCN1299

It has been my experience that kid’s are very forgiving when it come to their clothes.

They don’t care if the fit isn’t quite right. As long as the colors and designs are fun, they are willing to wear the item.

So, while I have been learning some great new techniques and skills while making the children’s clothes, even if it isn’t perfect in the end, I still have a usable item that a child will love to wear.

DSCN4123Plus, just how many shirts can I and the husband have with Snoopy or Mickey Mouse on them? I have so many fun embroidery designs and fabrics for fun kid’s clothes that I would probably never be able to use if I didn’t sew for children.

And how could I not sew and embroider up some of these great items for some children to wear and enjoy?

 

Reason number 2 is practice. You could also think of this as making mini muslins.

I wouldDSCN3413 like to make me a spring/fall polar fleece jacket. I want it to have a collar, a zipper, multiple pockets, and for the jacket to be fully lined. I have already purchased the fabric that I want this jacket made from and I have a basic jacket pattern to use as a guide to sew this jacket for myself.

But, I felt that I was lacking in the skills to sew this jacket. Skills that I need to be comfortable and confident using such as working with polar fleece, sewing pockets, inserting a zipper, and lining a jacket without a pattern.

DSCN4045

 

To remedy this lack of skills, I started out by making some smaller kid’s jackets and vests. I could learn and practice the skills that I needed to make my jacket by practicing first on the kid’s jackets.

I would waste less fabric if it turned out all wrong and I could repeat the skills that I needed to by practicing them first on the kid’s jackets.

DSCN0977

 

If you are a reader of my blog, you know that is exactly what I have been sewing recently.

I have made several kid’s jackets and vests. And in the process I have learned how to finish fleece seams, and I have learned to sew several different pocket styles, patch pockets, side seam pockets, welt pockets and others. I have practiced inserting zippers and sewing different collar styles.

And, more importantly, I have learned how to line an unlined jacket without using a pattern.

DSCN3898I now feel much more confident about cutting into my expensive fabric to make my jacket and in my ability to successfully sew my jacket together now that I have made all of these kid’s jackets and vests first.

In fact, I only have just a couple of more sewing skills that I want to practice and perfect on a couple of more kid’s jackets before I will finally be ready to make my jackets.

So stay tuned later this fall, as I might just be wearing a stylish new jacket (or two or three)!

Reason number 3 that I sew children’s clothes is that sewing clothes for kid’s is really FUN!

P1030564P1030560I enjoy sewing! A LOT! I really enjoy focusing my time and attention into the creative process and completing a functioning and fun item for someone to wear.

It does not matter if that item is for me, the husband, the house, the garage, or a kid, I (for the most part) enjoy the steps of making that item.

Plus, I enjoy learning. I learn from each sewing project that I make.

And, yes, sometimes what I learn and learn again, is patience!

As I mentioned in reason number 1, I have a lot of fun fabrics and embroidery designs that neither I nor the husband is ever going to wear, so for me anyway, it is just fun to sew and embroidery these fabrics and designs into clothes for children to wear.

DSCN3537DSCN3986As I mentioned in reason number 2, I made the kid’s jackets to learn and to practice the skills that I needed to make my jacket in the future, but each of the kid’s jackets or vests was very fun to design and to sew.

I learned from each project and for the most part I was pleased with what I made and what I learned in making them.

In other words, I really enjoyed the journey, from start to finish.

DSCN2582DSCN2926

Lastly, I really love to make something from nothing. I love to take the scraps from mine or the husband’s shirt and to make something from them for a child.

 

In doing so I feel like I am cheating or beating the odds somehow. I was able to take something that was useless, scraps that I could not use to make something for myself or the husband from, and was able to make a functioning, useful item from them.

DSCN0651

DSCN0389This is extra fun to do when I get to stretch my skills by using my creative process to make the scraps work in almost any situation.

So, that in very long form is my answer to question of “Why do you sew so many kid’s clothes?”.

With this complex of an answer to a simple question, you’re now probably afraid to ask any other questions, but don’t be.

In my own way, I will give you an answer that might be longer than expected, but enjoyable to hear.

Until then, sew forth and ask away!

Girl’s Fleece Jacket (Done Backwards) – Part 2

DSCN2088When I started this jacket, I decided to go ahead add the optional cuffs to the sleeves.

The cuffs looked so cute on the jacket on the pattern envelope, that I wanted this jacket to have the cuffs. But when it came time to sew the cuffs on, they were not turning out very well. They were just too bulky. The cuffs are made from two pieces of fleece. The first piece is sewn to the sleeve, then the next piece is sewn to the first piece and then folded over to make the cuff. I cut out the cuffs, sewed the cuffs to the sleeves and then removed the cuffs. In my opinion, this was a bad design for a fleece cuff due to so many seams in the cuffs and the bulkiness these seams caused. There are four layers of fleece in the top seam of the cuff, and that is just too many layers of fleece.

DSCN2084If I wanted to keep the cuffs, I had to come with a solution, so I gave it some thought and came up with some ideas.

First, the sleeves could be cut longer to make the cuffs. This would eliminating the bulky seams, but I had not cut my sleeves longer so this solution was out for this particular jacket. Another solution would be to use a thin lining fabric as part of the DSCN2086cuff, but I did not have it in me to dig through the stash to find a matching fabric. My third solution was to skip the cuffs, and make more bias tape. I would finish the edges of the sleeves with yellow bias tape to match the pockets. (My first thought was to use the bias tape to finish the edge of the cuffs, but eliminating only one of the layers in the bulky cuff was not enough.) So, I choose this as my plan. This jacket would not have cuffs, and I would finish the sleeves edges with the yellow bias tape.

Thinking back, I could have had cuffs on this jacket by combining the solutions. I could have used a lining fabric and the bias tape to make the cuffs and eliminate the bulk. Hmmm. Maybe I will try that on the next jacket.

DSCN3414By using the bias tape on the sleeves, I did not have to worry about a hem or the fact I had not cut the sleeves longer to accommodate a hem. I applied the bias tape to the edges of the sleeves, trimmed the seams and turned the bias tape to finish the seams. I noticed that the thin bias tape looked weak at the bottom of the heavy sleeves. The way I got rid of this weak look was to not trim the seam inside the bias tape so much, which was different from any other time I have applied bias tape. Previously, when I applied bias tape, I wanted the seam allowance trimmed out before folding the tape over. If the seam allowance was left inside the bias tape this time, the look was much fuller and it looked better.

DSCN3418It was now decision time. Which way did I want the jacket to cross, left over right or right over left? After a lot of thought and debating, I decided to cross the fronts as if it were a boy’s jacket, the left front on top of the right front. This will probably drive the little girl that wears this jacket nuts as she tries to button the jacket backwards, but the half froggy’s that I got from folding the jacket the other way just didn’t look good. Hopefully whoever wears this jacket won’t mind the backwards buttoning buttons if it is a girl.

I was dreading making the buttonholes on this jacket. I was not sure how my sewing machine would handle sewing buttonholes on fleece. Sometimes, even with thin non-stretch fabric, my sewing machine has a mind of its own when it comes to making buttonholes and sews whatever it wants to. To help combat this problem, I made horizontal buttonholes, and held my breath as the buttonholes were sewn, but my sewing machine did great and the buttonholes turned out just fine.

DSCN3413If I had known then, at the beginning of the sewing of this jacket, what I know now, nearing the end of the sewing of the jacket, I would have added piping to the peter pan collar to coordinate with the finished design of jacket. It would have been really cute to have had the bright yellow piping around the collar to match the piping on the pockets and the bias tape on the sleeve. This is definitely something I will keep in mind for the next jacket.

DSCN3416With the sewing on of the last button, the jacket was finally done!

The making of this jacket was a learning experience from the beginning to the end, from the cutting of the fleece, to the sewing of a back facing, to the piping curved pockets to the designing of the fleece cuffs. There were many lessons learned on this fleece jacket.

All in all, I think the jacket is very cute and I hope some little girl will be willing to wear it and will enjoy it!

Until next time, sew forth and fleece on!

Girl’s Fleece Jacket (Done Backwards) – Part 1

DSCN3413Over the years, I have accumulated a massive amount of polar fleece in the stash. At first, these fleeces were only purchased with blankets in mind, but over time, my ideas for fleece fabric has expanded. So, when I saw this pattern, McCalls M4981, especially designed to be made from fleece, I knew what I wanted to sew next.

IMG_0002 (2)M4961 is a pattern for a girl’s unlined fleece jacket with a peter pan collar, patch pockets and buttons closures. I was excited to get started, but I quickly learned that this project was not going to be an easy sew or a fast sew.

To start, I selected a piece of fleece from the stash. I chose this cute girl’s design of froggy’s, bees and rainbows on a brown background. I did not have to launder the fabric before I got started since their was no preshrinking needed with this fleece. I traced the pattern, size 6, and got started with the cutting process.

DSCN2575Cutting out this jacket was not an easy or quick task. The print on this fleece was so far off grain that it was almost impossible to cut the pieces so the froggy’s and rainbows were standing up straight. I pulled the fabric and repositioned the pattern pieces until I finally got the pieces cut out. When I finally finished the cutting process, I realized I had lined up the right and left front backwards from each other.

DSCN2572When I folded the right front over the left front for a girl, I got a nice froggy edge on the right side and half of a froggy edge on the left side, but if I folded the front as you would for a boy, left front on top of the right front, then I had a nice froggy front. So, should I have a poor looking front with half froggy’s and cross the jacket for a girl or have a nice looking front and cross the jacket for a boy? That was the question. This question did not have to be answered right away so I decided to move on.

DSCN3411I did add some thin interfacing to the facings and the collar. The husband thought I was crazy for adding more bulk to the fleece, but I explained to him that was why I was using such thin interfacing. I just wanted something to stabilize the fleece at those spots and keep it from stretching while sewing, particularly when it came time for buttons and buttonholes.

DSCN2074To start the sewing process, I did not read the pattern guide at all. Looking at the pattern pieces, the sewing of this jacket seemed pretty straight forward, So, I just got started. Who needs directions anyway? Am I right? I sewed and pressed the collar, serged the facings edges, folded them over and sewed the facings to the collar. Normally, my next step would be to sew a piece of twill tape to the collars inside edge to finish it and then tacked the facings to the shoulder seams. This pattern has a back facing as well though, and I stopped for a moment as I pondered how I was supposed to sew it on. I then turned to the pattern guide and read that sewing the back facing to the side facings should have been the first step before adding the collar.

Too late now!

DSCN3410I was certainly not unpicking all my sewing that I had done up to this point. My first instinct was to grab my twill tape and just throw away the back facing but then I came up with plan to attach the back facing. After some tedious sewing, I got the back facing sewn on, only to find out that I had sewn it on backwards. The wrong side of the fleece was facing out. Augh! There was no way I was unpicked the back facing just to flip it over. It would just remain backwards. Sometimes, just when you think you know it all, and you certainly know better than some pattern maker and you get ahead of yourself, you find out too late just how wrong you are…

DSCN2080When it came time to sew the pockets, I debated about how to get nice smooth curved pockets since the use of the iron was of limited use with the fleece. I had read about using piping to help curve the pockets so I decided to give it a try. I cut bias strips from yellow cotton scraps and made the piping for the pockets. When it came to sewing the piping to the pocket, I was having trouble starting the bias tape in the fold of the pocket because of the bulk of the fleece. I turned to some liquid stitch for help. I folded the yellow fabric over the top of the cording in the piping and glued it down with the liquid stitch. This gave me a finish at the top of my piping so I did not have to keep tucking it into the fold. I did the same thing at the other end of piping on the other side of the pocket.

DSCN3409I don’t know if I really like the look of the piping at the top of the pockets done this way but it is fine for this time. I think I need to read more on how to start and stop the piping on pockets. The piping did do its job and it helped to curve the edges of the pockets and hold the curve in place as I stitched the pockets on.

Plus, it looks really cute and makes the pockets stand out from the rest of the jacket.

There is a lot more to say about the sewing of this jacket but I’m going to stop here and give you a break from the long list of lessons I was learning on this project. Stay tuned for the finale of this backwards jacket next time!

Until then, sew forth and fleece on!

It A Trap (ezoid) Skirt!

DSCN2926When I found this trapezoid scalloped edged girl’s skirt pattern on the internet, I knew exactly what I wanted to do with the scraps that I had leftover from my minion shirt. The combination of the minion fabric, the banana fabric and the blue fabic had made for a fun shirt and it would definitely make a fun skirt too.

I was excited to get sewing but I knew that I had to start with a little math before I could take the first stitch.

Yes that’s right kids! Your teachers WERE RIGHT about the using math outside of school thing! Imagine that!

Since I was sewing empirically here, and not making this skirt for anyone in particular, so no particular size, I had to calculate how big I could make the trapezoids versus the amount of scraps that I had.

DSCN2554Luckily I’m not afraid of a little math, so after a few calculations, I found that I had enough scraps for a girl’s size 6 to 8 skirt, making the trapezoids 3 inches at the top and 5 inches at the bottom and 15 inches long. And as per my calculations, I would be cutting out 18 trapezoids in total, 6 from each of the three different fabrics and that would use up all the scraps I had.

I first cut myself out a trapezoid pattern piece and then I used it to start cutting. I tried to cut as accurately as possible so that all the pieces fit together nicely and would be even.

DSCN2717Cutting out the pieces took some time, but sewing the trapezoids together took even more time, plus each seam had to be pressed after I sewed them. I sewed each trapezoid from the bottom to the top to keep them as even as possible.

After the trapezoids were all sewn together, I used the skirt as my pattern to cut out the lining for the skirt. The pattern only called for only a small strip of lining to be used at the bottom of the skirt to make the scalloped hem, but I decided to fully line to skirt. This would take care of finishing all the trapezoid seams, and it would keep the girl’s panties from showing through the thinner minion and banana fabric and eliminate the hand stitching the pattern called for at the hem from only using a strip of lining.

DSCN2718Cutting the lining caused me a few moments of anxiety because of the amount of fabric needed to cut the lining. The skirt was made of scraps so really no large or useful sizes of fabric were used, but when the trapezoids were sewn together, they formed a circle skirt, and cutting a full lining on grain for a circle skirt did require a real size piece of fabric.

In fact, cutting this lining pretty much used up all the yellow lining fabric I had purchased on sale a while back. I was sad that this lining fabric was now all gone. It had been a great piece to turn to when I needed a lining for the little girls dress I had made. But, the husband comforted me by reminding me that there was now one less piece of fabric in the stash and that now I could go and buy more lining fabric. And who doesn’t love to go fabric shopping? Not me, that’s for sure!

DSCN2720With the lining all cut out and the its side seams sewn, placing right sides together and matching the hem, I sewed around the hem. At this time I cut out a cardboard circle to use as the pattern for the scalloped hem. I traced the circle onto the skirt, matching the seams of the trapezoids and the stitch line at the hem. After tracing a scallop on each trapezoid, I carefully sewed around each scallop edge. Trimming and snipping around each scallop was the next step followed by turning the skirt right side out. It was now time for a lot of pressing to the skirt hem.

DSCN2727Once the scalloped hem was done and pressed, it was time for the waist band. I had planned to use 3/4 inch elastic in the waist, so with a few more calculations, I cut the waist band from the blue fabric 2.5 inches wide and long enough to go around the top of the skirt. With right sides together, I sewed the waist band to the top of the skirt, serged the edges and pressed it towards the top of the waist band. I then serged the top edge of the waist band and pressed it over about 1/4 inch. I then folded and pressed the waistband over and stitched in the ditch to finish it off. I left a small unsewn portion to insert the elastic. I also added a small tag to the waist band to denote the back of the skirt from the front, although this skirt really does not have a front or back.

DSCN2723After the waist band was sewn up, it looked short, too short to fit 3/4 inches elastic into it. I am not sure where my calculations went wrong but I should have cut the waist band wider. I debated about unpicking the waist band and cutting a new wider waistband, but the thought of unpicking all the serging was unbearable, so I decided to use 1/2 inch elastic instead of the 3/4 inch that I had planned on. The 1/2 inch elastic fit into the waist band just fine and I think because this skirt is for a younger girl, the 1/2 inch elastic will wear fine too.

DSCN2725To determine how much elastic to use in the waistband, I measured the length of my finished skirt of approximately 15.5 inches. Looking at a chart I had downloaded off the internet, I cut my elastic 25 inches in length. 24 inches for the waistband and 1 inch for sewing it together. This length of elastic plus the length of the skirt meant I had made approximately a small size 8 skirt.

This worked for me. I do not think an eight year old girl is too old for a minion skirt. If I’m not too old for a minion shirt then an 8 year old girl is certainly not too old for a minion skirt. Perhaps I am just still young at heart!

DSCN2734I decided to do a decorative top stitch around the scalloped edge of the hem of this skirt. I think the scallops were sewn fine before I did this, but because this is a play skirt, and I am expecting it to be worn while running and jumping, a little extra strength at the hem certainly won’t hurt.

I think that this skirt turned out to be just adorable, and I am excited for a young girl to wear it and enjoy the minion and banana fabric as much as I have enjoyed making it!

This skirt has also given me one more option to use up my scraps with and I will keep it in mind that next time I am debating about what to do with a pile of scraps.

Until next time, sew forth and trapezoid on!

Invested

DSCN1372DSCN2485 (1)Do you ever have a pattern speak to you when you see it?

Me! Me! Me! Sew me next! Sew me next! Pick me! Pick me!

Well, this pattern did not just speak to me, it screamed at me!

The minute I saw this free vest pattern on the internet, I abandoned all of my other sewing plans.

Since I could not ignore its request to be sewn next, a boy’s vest became my next sewing project.

DSCN2491DSCN2492What caught my attention about this vest pattern was the endless creative possibilities that it presented.

From the fabric I would use to make this vest, to the type of pockets I would sew, to the embroidery and details I would stitch, there were dozens of designs decisions to be made.

First off, I picked the fabric. I choose some sport weight scraps for the outer layer of this vest and some flannel for the lining.

I did question using flannel for the lining though.

The smooth slippery fabric of a lining helps with taking an item on and off. Flannel is not smooth or slippery and would actually make it more difficult to pull an item on and off.

But, since this is a vest, i.e. without sleeves, I figured the flannel would be fine to use. Plus, it would add a layer of warmth to the vest, and as an added bonus, I would be using some of the flannel hiding in the stash and most importantly, I could incorporate the print of the flannel with the embroidery design that I would be stitching on it. So, it was not difficult to pick the dinosaur flannel fabric for the lining and a dinosaur embroidery design.

DSCN1364DSCN1365When it came to deciding on pockets, I liked the patch pockets that were used on the pattern so I decided to make them.

The pockets are not just typical patch pockets so there would probably be something new for me to learn from sewing them.

I started the process by downloading the pattern, printing it out, taping it together, cutting it out, and then throwing it away. Yes, you read that right. I threw it away.

DSCN1373DSCN2488As I laid the pattern pieces on the fabric, I did not like the way they looked at all. I couldn’t get the shoulder seams to match and the armscye looked misshaped.

I could see many problems occurring during the sewing process using that pattern and I did not want to waste my time or fabric on a doomed project.

I was disappointed to say the least.

I was so excited to make this vest and I had already put so much planning into it’s design that I did not want to just abandon the project.

So I turned to my pattern stash and what do you know! Lying right on top was a jacket pattern, Simplicity 8902.

Could I possibly use this jacket pattern to make a vest by just leave the sleeves off?

DSCN2487DSCN2486 (1)I did not know the answer to this question but I was certainly willing to find out.

I began to cut out the pieces for this vest from it. Since I was going to use buttons instead of a zipper, I added an extra 1 inch to the front pieces.

I also ironed on a strip of interfacing to this extra inch to strengthen it for the buttons.

My first step in the sewing process was to sew the pockets on the front of the vest.

Embroidering the dinosaur design was next. Then I sewed the shoulder seams and collar. It was then that I realized I should have reversed these steps. The collar is slightly covering the top the embroidery design. If the design had been any bigger, it would have been hidden under the collar.

The next time, I will sew the shoulder seams and attach the collar first and then embroider the design placing it so the collar is not in its way. Then I will attach the pockets last.

DSCN1368DSCN1369This way I will have no problem hooping the fabric for the embroidering without the pockets on the front, and after embroidering, I can place the pockets over the fabric that was hooped.

The original vest pattern had a bottom band. I liked the look of the band so I decided to keep it on this vest, so I cut the vest and lining 2 inches shorter than the pattern called for to accommodate the bottom band. Because of the bottom band, it was easy to sew the lining to the vest.

With right sides together, I sewed around the vest and lining before sewing the side seams then turned it inside out and sewed the side seams. After a lot of pressing, I sewed the band to the front side of the vest and lining and then folded it to the back and stitched in the ditch to finish up the band.

DSCN1374DSCN2490 (1)The last step was to sew the buttonholes and buttons.

I sewed vertical buttonholes so that my buttonholer would not have to move over the pockets. I don’t believe that vertical buttonholes will make a difference in how the vest wears.

In the end the vest turned out absolutely adorable!

I just love it, and it was so much fun to design and make that I can’t wait to make another one.

I have not given this vest to anyone yet so I do not have a “wear test” to tell me whether a jacket without sleeves makes for an acceptable vest, but it looks good to me.

I could always make the armscye a little bigger on the next vest to ease my mind and the fit.

So until the next time, sew forth and vest on!