Archives

HaHaHaHa – Part 3 of Sew It Begins

With the husband’s latest shirt completed, it was finally time to sew a new shirt for myself.

I picked the design and fabric for my new shirt based on the embroidery design that I had picked out to use. I love this Snoopy design and I have always wanted to embroider it on a shirt for me. So, with the Snoopy design in mind I entered the stash room and picked a piece of blue cotton and a matching patterned cotton remnant for the fabric for this shirt.

After laundering the fabric, I laid it out on the cutting table and got started. I cut out the pieces from the blue cotton first, then I cut into the remnant only to find out that I was short on fabric. I must have measured incorrectly or the fabric had shrunk more than expected in the wash.

Regardless, this piece was too small to use now. Logically, I should have returned to the stash room and chosen another fabric but, oh no, not me. The challenge was on. My creative mind was churning. How could I get the needed pieces from this short piece of fabric?

I started by changing my idea of matching the pattern of the fabric at the side seams. I debated if not matching the pattern was a good idea, or if it would make me crazy after the shirt was sewn. Since the pattern on the fabric was a little crazy itself and it would be non matching at the seam under my arms, I decided to go for it and disregard matching the pattern.

Even with not matching the pattern at the side seams, I was still a little shy, about 2 inches, of having enough fabric for the sleeves. What could I do to get just 2 more inches? If I shortened the sleeves by an inch each, I would have my 2 inches, but I did not want my sleeves an inch shorter. So how could I cut the sleeves an inch shorter and still have them the same length?

Bias tape was the answer.

I cut the sleeves the inch shorter, but instead of hemming the sleeves, I made some 1/2 inch bias tape from the blue cotton and used the bias tape to finish the sleeves. The rest of the sewing of the shirt sewed smoothly and embroidering the Snoopy design was great fun.

I am very pleased with this shirt. It is fun to wear and I love having the Snoopy design on it. It was also a fun shirt to sew and it was exciting to let my creative mind work to solve a sewing problem.

With a new shirt done for both the husband and the me, it was time to pick a my next sewing project. Stay tuned to see what that will be.

Until then, Sew forth and Laugh on!

Advertisements

Behavioral Economics

make0016IMG_3913I stopped buying fabric remnants at Walmart a while back now because the remnants at Walmart are only discounted 20% off. When the price of fabric at Walmart used to sell for less, it seemed like the remnants with the 20% off discount was costing very little money at all. So, even if it was a little less or a little more than I needed or not quite enough for what I had in mind for that specific project, it was easy to purchase them anyway.

But, when the price of fabric went up at Walmart, the extra 20% off the remnants price just didn’t seem like it was that much of a discount. To me the remnants cost still seemed to be expensive in my mind. It made you stop, think twice and look carefully instead of just tossing the remnants in your shopping cart without much thought about the cost.

IMG_3908IMG_3909Now it does matter to me if the remnant is too little, too big, or doesn’t quite match what I had in mind. The illusion of saving more or getting a deal on the remnant pieces just isn’t there anymore, so why not get exactly what you want and need cut directly from the bolt?

Recently while doing some shopping at Walmart for items other than fabric, I ended up purchasing almost every remnant my Walmart had. Why, you might ask? Let me tell you why…

My local Walmart was prepping for it’s inventory, and I just happened to be at the right place at the right time for once. All of the remnants in the bin had been marked down to clear them out before their inventory. Most of the remnants had been marked down to a half of the 20% off price. That was about a 70% savings off the regular cost. Some of the remnants were not IMG_3910IMG_3911marked down quite by half and a few were marked down more than a half. Regardless of whether it was more or less, the remnants were a great price and I did not hesitate toss almost all of them from the bin into my cart. I think the only thing I left in the remnant bin were a couple of pieces that I definitely knew I would have no use for, like a small piece of vinyl and some cheap fleece.

I hauled my treasures home and I have had a great time sorting and matching the pieces with other fabrics in my fabric stash and creating a sewing project for each piece that I purchased. I am so excited about the remnants that I purchased that I’m not even planning on storing these remnants in the stash. Instead, I want to get them sewn up right away.

So, I guess that is my cue! I had better get busy sewing! Winter is coming…

Until then, Sew Forth and Remnant On!IMG_3917

Creative Determining – Part 2

DSCN3986DSCN3987To begin the the sewing process of the Snoopy peplum top I started with the peplum first.

Since I was not going to line the peplum, I wanted to hide all the seams as much as possible, so I sewed French seams to piece the peplum together.

 

This was not difficult, just time consuming with a lot of ironing in between seams. I did a simple 1/2 inch hem at the bottom of the peplum to complete it.

Sewing the bodice was next. I decided at the last minute to add the yellow sleeves to the top. I like the yellow sleeves but as I snipped the curve of one of the sleeves I caught the lining and so I had to do a little mending. Luckily, the mended spot is on the inside of the top and cannot be seen from the outside. It should not affect the wearing of the top.

DSCN3998DSCN3989After gathering the peplum, I sewed the peplum to the bodice, making sure to line up the seams as much as possible. I serged this seam to finish it, rather than covering the seam with the lining and doing the stitch in the ditch seam.

The serged seam looks fine and saved me the headache of doing the stitch in the ditch seam.

 

I probably could have used the practice sewing the stitch in the ditch seam on this top, but sometimes just sewing the easy and simple way is fun too. And it’s much less stressful too!

With that, the little girl’s peplum top from the leftover Snoopy fabric scraps was completed!

DSCN3995DSCN3994The top is just adorable and the multiple seams in the peplum are really not that noticeable with the gathers.

This was a fun sew.

It is always fun to make something from nothing and to let the creative side flow to make it work.

Unfortunately, now that I have used up all the Snoopy scraps, I have at least a hundred projects that have raced through my mind that I could have made using the scraps.

Having said that though, I am not disappointed at all that I used these Snoopy scraps to make this top and at least they were put to good use!

Until then, sew forth and determine on!

Creative Determining – Part 1

DSCN3986There was no way that I was going to throw away any of the precious Snoopy fabric scraps left over from my new Snoopy shirt. The scraps really were not large enough to make anything with, not even for a child, but I just could not bear to throw them away. So, what to do with these scraps beside stack them on the edge of the cutting table and stare at them?

Recently, I have seen several little girls peplum tops that are just adorable and I have wanted to make one. So, looking at the Snoopy fabric scraps, I decided to see if I could squeeze a little girl’s peplum top out of the pieces. The size of top I would make would be determined by the dimensions of the scraps.

DSCN3813I didn’t really have a pattern so I turned to the internet for ideas. The first style of peplum top I found had a circular peplum. This was out of the question. The scraps I had to work with were absolutely too small to cut a circular peplum from. The second style I found was a gathered peplum. Hmmm. I might be able to make this work with the scraps.

DSCN3985Now, how long should the peplum be versus the length of the bodice? I saw a variety of bodice and peplum lengths from long bodices with short peplums to short bodices with long peplums and many hi/low peplums in between while I was searching. Once again, I would need to let the dimensions of the scraps determine the length of the peplum and the bodice and the scraps would also determine how full the gathered peplum would be.

DSCN3999Still not having a pattern, I pulled out my favorite little girls dress pattern as a guide. Based on the size of the largest scrap, I determined that I could get a size 4 bodice front and back from the scraps as well as have a few pieces left over for the peplum. I quickly picked some yellow cotton from the stash that matched Woodstock for the lining of the bodice.

To make the peplum, I squared the remaining scraps of Snoopy fabric I had and found that I had two pieces approximately 6 inches tall by 12 inches wide and 4 pieces that were 6 inches tall by 6 inches wide. (Actually, one of the 6 by 6 inches pieces was only DSCN39965 inches wide, but I could work with that.) With a lot of seam work, I determined that I could make these scraps work out for the peplum. I would sew the two 12 wide pieces together for the front of the peplum and sew the 6 inches pieces together for the back or the peplum.

I would not be matching any of the designs in the Snoopy fabric. There was certainly not enough scraps for that, but luckily with a gathered peplum, the non-matching designs as well as the many seams that I would be sewing would just be gathered in.

Excitement for this project grew, as I saw my almost useless scraps become a little girls peplum top!

Stay tuned for the sewing of the little girl’s Snoopy peplum top.

Until then, sew forth and scrap on!

Down In The Southwest

DSCN4029Waste not, want not, but as you know there is more to it when it comes to fabric scraps and remnants. It’s the challenge of making something from nothing and the creativity of making it work that gets you to use those scraps and to buy those fabric remnants from the bargain bin at the fabric store.

It was this challenge and creativity that got me to begin my latest sewing project.

DSCN4027I saw this southwest print in a stack of discounted flat fold fabrics and I just fell in love with it. I love the bright colors on the black background and the fabric has a nice weight and feel to it. But, there was just a little over a yard left. What could I make from that? The fabric would be ideal for me a shirt, but could I figure out how to piece it together with other pieces of fabric to make me a shirt? Color blocking ideas swirled in my head so I quickly purchased the piece of southwest print fabric and brought it home!

DSCN4033With a color blocking design in mind, I dug through the stash and found several pieces of fabric that I could put together with the southwest print to make me a shirt, but the deep blood red piece that I found was by far my favorite. But, as I went to cut the shirt out, I noticed that the red piece of fabric was terribly flawed.

What was such a flawed piece of fabric even doing in the stash?

I returned to the stash to select a different piece of fabric to use with the southwest print but now I did not like any of my other choices. I thought about going back to the fabric store to look for more red fabric but I was too disappointed to go. I took another look at the flaws in the red fabric to see if I could work around them. How could I make it work the way it was? After much thought, I came up with a new color block design that should work, but I would have to cut the southwest print perpendicular to the grain line.

Would it be ok to cut against the grain?

DSCN4022After much studying and reading about grain lines, grain, cross grain, welt and warp threads, I decided that yes it would be ok to cut my fabric perpendicular to the grain line as long as I was careful to cut on the cross grain just as I would be careful to cut on the grain line. At this point after fully researching the issue, it was finally time to cut the fabric.

The cutting process started with tracing my pattern and then cutting out new pieces for the color blocking. This took time and thought. I had to decide where I wanted the seams to be, add some seam allowances and then reshape the armscye and hem. With the new pattern pieces created, it was time to cut. I carefully cut the front and back pieces perpendicular to the grain line from the southwest print and the I carefully placed and cut my new side pattern pieces and sleeves around the flaws of the red pieces of fabric. With the pieces all cut out, it was time to sew.

DSCN4023The sewing process was going along smoothly until I noticed the flaw of the red fabric in the center of one of the sleeves. I thought I had cut so carefully around the flaws but I guess that I had not. I had no more non-flawed red fabric to cut out another sleeve with. Could I just pretend the flaw was not there? No, I would never wear the shirt with the flawed sleeve. Hmm, I wondered. Could I cover up the flaw with a little embroidery? Yes, that would work!

I picked a lizard embroidery design and some bright colors to match the southwest print and embroidered the design on the sleeve to cover up the flaw and it worked great! You can still see the flaw, but your eye is now attracted to the embroidery design instead of the flaw so no one ever notices it. Showing the husband my embroidery solution, he suggested embroidering another lizard on the other sleeve to balance out the design. So, I picked some more bright colors and embroidered another lizard on the other arm. With the lizard designs embroidered on each sleeve, it did not take long to complete the hems and sew on some bright southwest looking buttons to complete the shirt.

DSCN4026I was a little apprehensive about wearing this shirt at first with its bright colors and it’s multiple embroidery designs, but it did not take long to fall in love with the shirt. It is a lot of fun to wear! The color blocking, bright colors, and the embroidered designs make it highly unique. This shirt also fits well. The alterations to the pattern for the color blocking did not affect the fit.

I am very pleased with this shirt and have already worn it several times. I am now excited to make more projects with lots of color blocking and embroidery designs but minus the flawed fabric.

Until then, sew forth and lizard on!

It A Trap (ezoid) Skirt!

DSCN2926When I found this trapezoid scalloped edged girl’s skirt pattern on the internet, I knew exactly what I wanted to do with the scraps that I had leftover from my minion shirt. The combination of the minion fabric, the banana fabric and the blue fabic had made for a fun shirt and it would definitely make a fun skirt too.

I was excited to get sewing but I knew that I had to start with a little math before I could take the first stitch.

Yes that’s right kids! Your teachers WERE RIGHT about the using math outside of school thing! Imagine that!

Since I was sewing empirically here, and not making this skirt for anyone in particular, so no particular size, I had to calculate how big I could make the trapezoids versus the amount of scraps that I had.

DSCN2554Luckily I’m not afraid of a little math, so after a few calculations, I found that I had enough scraps for a girl’s size 6 to 8 skirt, making the trapezoids 3 inches at the top and 5 inches at the bottom and 15 inches long. And as per my calculations, I would be cutting out 18 trapezoids in total, 6 from each of the three different fabrics and that would use up all the scraps I had.

I first cut myself out a trapezoid pattern piece and then I used it to start cutting. I tried to cut as accurately as possible so that all the pieces fit together nicely and would be even.

DSCN2717Cutting out the pieces took some time, but sewing the trapezoids together took even more time, plus each seam had to be pressed after I sewed them. I sewed each trapezoid from the bottom to the top to keep them as even as possible.

After the trapezoids were all sewn together, I used the skirt as my pattern to cut out the lining for the skirt. The pattern only called for only a small strip of lining to be used at the bottom of the skirt to make the scalloped hem, but I decided to fully line to skirt. This would take care of finishing all the trapezoid seams, and it would keep the girl’s panties from showing through the thinner minion and banana fabric and eliminate the hand stitching the pattern called for at the hem from only using a strip of lining.

DSCN2718Cutting the lining caused me a few moments of anxiety because of the amount of fabric needed to cut the lining. The skirt was made of scraps so really no large or useful sizes of fabric were used, but when the trapezoids were sewn together, they formed a circle skirt, and cutting a full lining on grain for a circle skirt did require a real size piece of fabric.

In fact, cutting this lining pretty much used up all the yellow lining fabric I had purchased on sale a while back. I was sad that this lining fabric was now all gone. It had been a great piece to turn to when I needed a lining for the little girls dress I had made. But, the husband comforted me by reminding me that there was now one less piece of fabric in the stash and that now I could go and buy more lining fabric. And who doesn’t love to go fabric shopping? Not me, that’s for sure!

DSCN2720With the lining all cut out and the its side seams sewn, placing right sides together and matching the hem, I sewed around the hem. At this time I cut out a cardboard circle to use as the pattern for the scalloped hem. I traced the circle onto the skirt, matching the seams of the trapezoids and the stitch line at the hem. After tracing a scallop on each trapezoid, I carefully sewed around each scallop edge. Trimming and snipping around each scallop was the next step followed by turning the skirt right side out. It was now time for a lot of pressing to the skirt hem.

DSCN2727Once the scalloped hem was done and pressed, it was time for the waist band. I had planned to use 3/4 inch elastic in the waist, so with a few more calculations, I cut the waist band from the blue fabric 2.5 inches wide and long enough to go around the top of the skirt. With right sides together, I sewed the waist band to the top of the skirt, serged the edges and pressed it towards the top of the waist band. I then serged the top edge of the waist band and pressed it over about 1/4 inch. I then folded and pressed the waistband over and stitched in the ditch to finish it off. I left a small unsewn portion to insert the elastic. I also added a small tag to the waist band to denote the back of the skirt from the front, although this skirt really does not have a front or back.

DSCN2723After the waist band was sewn up, it looked short, too short to fit 3/4 inches elastic into it. I am not sure where my calculations went wrong but I should have cut the waist band wider. I debated about unpicking the waist band and cutting a new wider waistband, but the thought of unpicking all the serging was unbearable, so I decided to use 1/2 inch elastic instead of the 3/4 inch that I had planned on. The 1/2 inch elastic fit into the waist band just fine and I think because this skirt is for a younger girl, the 1/2 inch elastic will wear fine too.

DSCN2725To determine how much elastic to use in the waistband, I measured the length of my finished skirt of approximately 15.5 inches. Looking at a chart I had downloaded off the internet, I cut my elastic 25 inches in length. 24 inches for the waistband and 1 inch for sewing it together. This length of elastic plus the length of the skirt meant I had made approximately a small size 8 skirt.

This worked for me. I do not think an eight year old girl is too old for a minion skirt. If I’m not too old for a minion shirt then an 8 year old girl is certainly not too old for a minion skirt. Perhaps I am just still young at heart!

DSCN2734I decided to do a decorative top stitch around the scalloped edge of the hem of this skirt. I think the scallops were sewn fine before I did this, but because this is a play skirt, and I am expecting it to be worn while running and jumping, a little extra strength at the hem certainly won’t hurt.

I think that this skirt turned out to be just adorable, and I am excited for a young girl to wear it and enjoy the minion and banana fabric as much as I have enjoyed making it!

This skirt has also given me one more option to use up my scraps with and I will keep it in mind that next time I am debating about what to do with a pile of scraps.

Until next time, sew forth and trapezoid on!

WWWHHHAAATTT!?! – The Minions – Part 2

DSCN2582I had already spent the appropriate amount of time worrying about making this minion shirt so it was easy to get started on it.

I really wanted this shirt to sew together without any problems, so I decided to take my time and think things through carefully. So after laundering and ironing the fabric , it was time to start cutting.

I cut very carefully and added the alterations that I wanted to the pattern as I cut. I was quite selective about the interfacing I chose to use and I went ahead and cut it out too.

DSCN2584As I started to sew, I realized that I did make one cutting/design error, well not really an error, but a small change to the design. In my mind, the shirt had the minion fabric on the right and the blue on the left, but I had cut the left front from the minion fabric and the right front from the blue fabric. Mmmmmm, was this going to look ok? After much thought, I decided it would look fine, and maybe better because the buttons would be on the solid blue fabric instead of lost in the the minions fabric.

DSCN2581The sewing when smoothly. I took my time and tried the shirt on after each step. I also ironed each seam carefully as it was sewn. As I serged the edges of the sleeves, preparing them to be hemmed, I did not notice that I I was running out of thread on one of my loopers. Once the looper ran out of thread, my serged edge was ruined. Luckily, I had debated about cutting 1/2 inch off the length of the sleeves and had not done so yet. So, I cut the 1/2 inches off the length of the sleeves ridding me of the bad serged edge, threaded new spools of thread on my loopers and serged the new edges.

With the sewing on of the final button, I declared the shirt done and tried it on. The fit seemed to be good, but as I looked at myself in the mirror, the shirt needed to be something else. The right blue front was just that, blue. I grabbed some scraps and started adding to the blue front piece.

DSCN2493At first, I wanted to add a stripe of minion fabric down the blue front, but that was too much of an accent. I thought about digitizing a minion embroidery design. But since I was too excited about wearing the shirt, and it would take time to perfect the design and I wanted to wear the shirt now. My next thought was a pocket. This would not be a functioning pocket, just something for show, so it would not have to be any certain size or style. I decided to make a temporary pocket and see how it looked pinned on.

DSCN2496To make the pocket, I cut out two squares of fabric and then rounded the corner on one end. Next, with right sides together, I sewed completely around the two modified squares. Next, I made a small cut in the fabric that would be inside the pocket. I turned the pocket right side out through this slit. After a lot of pressing, with a little seam to seam, I mended the cut that I made in the pocket to turn it inside out. This worked well and I had a finished pocket. Since I will not be putting anything in this pocket, I am not worried about the seam to seam mending holding up with wear and tear.

Placing the pocket on the blue front, I liked it, then with another look, I did not, then after a few minutes, I liked it again.

Argh!

DSCN2498I turned to the husband for his opinion and he said that he did like the pocket, so I sewed the pocket to the front of the shirt. I am still up in the air as to wether I like the pocket or not but it is sewn to the shirt for now.

The shirt has passed the “wear” test and I really like it. My alterations seem to be good. This shirt is fun to wear and is very comfortable.

It also makes me crave bananas for some reason…

Until next time, sew forth and banana on!