Archives

Go Pirates

 

I fell in love with this pattern, Simplicity 1020, the minutes I saw it.

You may ask why?

It looks utilitarian, but  I could see potential color blocking opportunities and some fitting in the color block seams.

There was a big problem for me since this pattern did not come in my size. So, this meant a lot of measuring of myself, the pattern, and my sloper patterns to make it work.

Since I had to resize all the pattern pieces, I did not want to use my best fabric to make this shirt, so I picked the purple scraps from the husbands last shirt and some light yellow from the baby fabric stash pile. Purple and yellow go together don’t they?

Yes they sure do. They were my high school colors. Go Pirates!

After completing the shirt, which sewed together nicely with extra attention paid to the v-neck ribbing, I did not think I could bring myself to wear this newly made cheerleader top, even if it had a Woodstock embroidered on it. But, I did wear it. It was very comfortable, and I even received some sincere compliments on it.

Inspired, I headed for the sewing room, and made a second shirt, from some precious gray knit fabric and embroidered a favorite panda design on the front. This shirt is just as comfy and fun to wear as the first one.

Stay tuned for more sewing adventures!

Until then sew forth and “Go Pirates!” On!

 

Advertisements

It’s In The Bag! – Part 2 – The Lining

DSCN3886After completing the shell, I sewed the lining next. I serged all the seams and edges of the lining because the gray lining fabric just loved to fray. This was not difficult, just time consuming. I left part of one of the sleeve seams unstitched for the bagging of the jacket. With the shell and the lining sewn, it was time to sew these together and bag the jacket.

DSCN3880Even though I knew what do sew next, I decided to read the tutorial for bagging a jacket one more time, and I am glad that I did. At the top of the bagging tutorial was a link to a tutorial on how to cut a lining for a jacket. I had not read this tutorial before and even though my lining was cut and sewn, I decided to read the tutorial.

I was unpleasantly surprised to find out that I had made my lining incorrectly. There were more steps to cutting a lining out than just cutting out the pattern pieces again from lining fabric. I debated about just using my finishing lining and learning the lesson for the next time but then I read how if the lining is not cut with ease, the jacket will not fit or wear well.

Darn!

DSCN3909I was going to have to make another lining! And this time I would be following the tutorial to get it right!

DSCN3890I returned to the cutting table and I cut out a new lining with the extra inches at the fold in the back and the ease at the armscye and sleeves. I once again cut the lining 2 inches shorter at the bottom and at the sleeve’s hem. At the sewing machine, I made a box pleat in the top and bottom of the back piece to gather in the extra inches. I once again serged all the seams and edges to keep the lining fabric from fraying, and I once again left part on one of the sleeve seams open for the bagging. With a whole new lining, one that had appropriate ease added in, I was ready to once again bag the jacket.

DSCN3892Following the steps of the bagging tutorial, I sewed the shell and lining together. Next I sewed the sleeve hems together, and then turned the jacket through the unfinished seam on the sleeve. This worked fantastically! The zipper turned beautifully to the front of the jacket, the collar was finished, with no twill tape or facing needed, and the hems both at the bottom and sleeves rolled up 1 inch. The last step was to sew the unfinished seam of the sleeve together.

DSCN4004Normally, this is where the hand sewing would be required, but the tutorial said just to sew along the edge of the sleeve seam with wrong sides facing. Yes, this left a little ridge, but it would be inside the sleeve where no one would know that it was there, or see it, or even notice it while wearing the jacket. Even with the jacket off, it would be highly unlikely that the sleeve would ever be turned inside out to reveal this seam. This was great for me! A quick easy seam to finish the jacket plus no evil hand sewing!

DSCN4007As I zipped my completed jacket up, I figured out why the making of the lining tutorial kept talking about the facings. I assumed that since I was lining the jacket, the facings were not needed, but after zipping the jacket and having the lining exposed where the facing would have been, I could see how the facings from the shell fabric would look and wear better than the lining.

DSCN4000At this point in the construction I did something I don’t normally do when I am sewing kid’s clothes. I needed to remove the top stabilizer that I had used to hold the fleece down while embroidering on the pockets. I could have just ran a little water over the pockets and let them air dry, but I decided to wash and dry the whole finished jacket instead, just like a mom would do after the kid had spilled ice cream down the front of it.

DSCN3992I was a little disappointed when I removed the jacket from the dryer. The fleece had fuzzed up a little and some of the shiny new look was gone, but all the seams held well and the lining did just fine. So at least I know this is not a dry clean only type of situation, which wouldn’t be good on a child’s garment, and that the jacket can be machine washed and dried without ruining it.

DSCN3990Despite the exposed facing and the fuzzing fleece, this jacket turned out just too cute. I love the paw print, the contrasting colors, the side patch pockets, the Dalmatian embroidery designs, the zipper and the lining.

Let’s face it, I love the whole jacket! I especially love the bagging of this jacket and the lack of hand sewing. I see another jacket just like this one but with facings added in my near future, so stay tuned!

Until then, sew forth and bag on!

It’s In The Bag! – Part 1 – The Pockets

DSCN3898I found one more way to finish the edges of polar fleece seams on a jacket. Just put a lining in the jacket! Now, lining a project has always frightened me just a little because it required hand sewing to finish it up and as you know hand sewing is evil and must be avoided at all costs. But, I found a great tutorial online explaining how to bag a jacket, i.e. how to add a lining to a jacket, with little to no hand sewing so I was excited to try bagging a jacket for the first time.

At the top of the tutorial, the statement was made that any garment could be lined regardless of whether the pattern called for a lining or not, so I did not bother to look for a pattern with a lining. I just grabbed my tried and true kid’s jacket pattern, Simplicity 8902. It took only a minute to pick out the red puppy paw print fleece fabric and some gray lining to use to bag this jacket.

DSCN3873I gave the design and construction of this jacket a lot of thought before I made the first cut into the fabric. I decided I did not need the facings on it since the lining would replace them. Next, I would cut the lining 2 inches shorter at the hems of both the bottom and the sleeves so that the lining would pull the fleece around to complete the hems. Last, I wanted to embroidery a design on the jacket, but I knew that it would get lost in the busy puppy paw design of the fleece.

DSCN3874So to remedy this problem, I decided to make side patch pockets for the jacket from some grey fleece scraps and to embroider the designs on to the pockets. I also decided to make the collar from the grey fleece too to match the pockets. I thought about using the lining fabric for the bottom of the collar, but the grey fleece was not that heavy so I decided to make both sides of the collar using the fleece. With that plan in mind, it was time to cut the fabric and get sewing!

DSCN3876The cutting process went smoothly. I cut out the pieces for the shell or outside of the jacket from the fleece and then I cut matching pieces from the grey lining. I started the sewing process with the shell of the jacket which was going along just fine, including the sewing on of the zipper, until the pockets.

DSCN3879The husband picked out the Disney 101 Dalmatians for the embroidery designs so I embroidered Perdita on one pocket and Pongo on the other. With the embroidery done, I decided I wanted to line the pockets to protect the back of the embroidery designs from things that would be put in the pockets and to protect little hands from the embroidery designs rough parts. But, how should I line the side patch pockets?

DSCN3991To line the pockets, I cut two pockets from the lining fabric minus the fold over flap. I serged the edge of the lining fabric where the flap would have been. I folded the fleece flap of the pocket to the wrong side of the pocket and then placed the lining on top. I then sewed right sides together on three sides of the pocket. Next, I turned the pocket at the flap. After ironing the pocket, I folded the flap over, encasing the exposed but serged lining under the flap, and then I sewed the flap down to the pocket to complete the lining of the pocket. It was then simple to sew the pockets onto the front shell of the jacket.

I am going to pause here and let you catch your breath for a minute. I still have a lot of story to tell about the sewing of this jacket. So, stay tuned for the exciting conclusion in part 2 of It’s In the Bag.

Until then, sew forth and bag on!

 

Oh! That’s Gonna Leave a Welt… – Part 2

DSCN0977Continuing on from my first part of the welt pocketed jacket project, the rest of the jacket sewing went smoothly.

I used pleather for the collar as well as the pockets and it all sewed up great! Because the zipper was not inserted into the collar, there was no hand stitching and I was able to finish off the collar with some twill tape. I also remembered to press the pleather with a press cloth on both the pockets and the collar so that the iron did not damage the pleather. Before long the sewing was done and the jacket was complete.

With the jacket completed, I studied it closely and something was not right.

DSCN0981I stared at and studied the jacket until I finally figured out what that something was. The neckline on this jacket is HUGE! It is way too big around. I returned to the pattern, but as far as I could tell, I had traced and cut the pattern pieces correctly. Had I sewed something wrong or was it the pattern? I had a few options to try and fix it. I could try to fix the neckline, but for a trial jacket, I was not willing to spend the time and energy on a fix, especially to find out that the fix didn’t work or made things worse. Disappointed, I thought about not embroidering on the jacket, but then decided that some kid somewhere would be willing to wear this jacket, and he or she would need something fun embroidered on it to distract from the huge neck line.

DSCN0922Picking an embroidery design for this jacket was not an easy task. Since I did not know who the final owner of this jacket would be, I tried to make it as unisex as possible, but each embroidery design I picked swayed the jacket to the feminine or masculine side. I looked and debated over many designs until I finally realized that I was wasting all my sewing and embroidery time picking out the design. I finally went back to one of my first choices and embroidered The Lady and The Tramp design on the jacket. The jacket is definitely for a girl now but I love the design on it.

DSCN0982I am still not happy with the collar on this jacket, but I am very pleased with the welt pockets, the pleather accents and the embroidery design.

Ultimately, I am happy with the end results of this jacket and hope that there is a young girl out there willing to wear this jacket even with the oversized collar. I am super excited about learning to make welt pockets and I cannot wait to start another project with welt pockets!

Until then, sew forth and welt on!

Oh! That’s Gonna Leave a Welt… – Part 1

DSCN0977I decided that is was time to try making welt pockets.

Welt pockets always look so nice and professional, plus I had something special I wanted to try for the welts. One day while shopping at Walmart, I saw a couple of bolts of patterned pleather and I knew right away that it would be perfect to make the welts for the welt pockets from. I quickly purchased some, and headed for my sewing room.

First, I needed a pattern. After looking through my pattern stash, I turned to my Kwik Sew books on the shelf.

Yes, there were jacket patterns with welt pockets and instructions in these books. I was super excited and ready to get started!

Next, I had to choose a fabric for the jacket. I had a bright yellow sweatshirt fleece hiding in the stash and debated if pleather and sweatshirt fleece would look good together. I finally decided that they would, especially for a first try of welt pockets. It was easy to pick out some left over scraps from one of my shirts for the body of the pockets.

DSCN0827DSCN0830And I decided to make a size 8 jacket because of the length of the zipper I had. I would need to lengthen the jacket a little to accommodate the zipper, but I didn’t think that would affect the wearing of the jacket.

The first step in making this jacket was to see if pleather would survive the washer and dryer.

It did! And beautifully I might add!

The next step was to see if my sewing machine would sew the pleather or if I was going to require a special foot, needle and thread for sewing the pleather. I did not. The pleather sewed beautifully with just my normal pressure foot, regulars thread and a new Schmit universal needle.

DSCN0833DSCN0836Wow! I had read horror stories on the internet about sewing with leather but I guess pleather is different, or maybe just these particular pieces. Regardless, I was excited!

With the pattern traced and the fabric cut, it was time to get sewing.

To sew the welt pockets, I started with some scraps to get an idea of what I was doing, then I moved on to the jacket.

DSCN0838DSCN0842I started by applying a pieces of interfacing with the sewing lines to the front of the jacket. Next, I taped the pleather in place and then O sewed around the lines.. I taped it because I did not want to scar the pleather with pins. Cutting was next and then pulling the pleather to the wrong side to form the hole for the pocket. Then I folded up the welt and sewed it in place, and then I attached the body of the pocket to the pleather and finally I sewed around the body of the pockets.

DSCN0848DSCN0844Soon enough, I had completed the two welt pockets. They are not perfect but they were fun to make and I really like the results especially with the pleather.

I debated about interfacing the pleather of the welt but I thought that the pleather was stiff enough to not need interfacing. As I inserted my hand into the pocket, past the welt, I wished that I had interfaced the welt and made it stiffer to withstand use over time.

I had pictured the welts as being bigger than they finished up being. Knowing now how to make welt pockets, I feel that I can make the welts in different sizes and styles the next time I make something with welt pockets.

Coming up next, the completing of the jacket.

Until then, sew forth and welt on!

Yay Sports! Go Team!

DSCN3421 (1)IMG (1)I am certainly not a big sports fan, and I am especially not a big football fan, but I am a BIG fan of fabric. So, you know, when I saw this football fleece on clearance at Joann’s and I also had a coupon for even more off the already low reduced price, you just knew I was going to buy some of it. And even though I may not be a big football fan, I am sure there is some one out there that is, and would want me to make something for them from this fleece.

In trying to fall in love with fleece again, I did some reading on the internet and I found some suggestions for sewing with fleece. I wanted to try out a couple of the suggestions, so I pulled out this football fleece and a simple pattern, Kwik Sew 3235, for a pullover fleece jacket. In making a pullover jacket, I won’t have to worry about buttons or a zipper, and I could focus on the seams and the suggestions I had read about.

DSCN2561DSCN2797I could not decide which size between a medium or large that I wanted to make, but as I mentioned in a previous post, the fabric decided for me. I would be making a medium pullover jacket. Also as previously mentioned, this pattern was not very easy to cut out due to the fabric. I had to really work to keep the footballs and helmets straight. When I cut out the pocket, I purposely did not match the design because I wanted the pocket to stand out from the rest of the jacket’s design.

With my pattern pieces cut out, I started the sewing process. The first suggestion I followed was to put a new needle in the machine. The suggestion said to make sure it was a ballpoint needle. I only use Schmetz universal needles so that is what I sewed it with and it did great. The next suggestion was to lengthen my stitch length because of the bulk, which I did. When it can time to iron it, I followed another suggestion of using a press cloth so I could iron the fleece a little more aggressively without hurting the fleece.

DSCN3426 (1)DSCN3429 (1)One article I read suggested three different types of seams that worked well for sewing fleece, a fake flat fell seam (sometimes called a faux flat felled seam), a lapped seam or a double topstitched seam. I was not impressed with the lapped seams but wanted to try the other two seams. As I started to sew, I found that I wanted to just sew double top stitch seams so that the seams matched. The double top stitch seam is sewn by first sewing your seam as you normally would, then sewing the seam allowances down close to the edge of the seam allowance, then trimming close to the seam allowance stitching. Since fleece does not fray, cutting close to the stitches finishes off the seam. On the top side, there is a cool double row of stitching encasing the seam. This is a fun look that looks like it took a lot of effort to sew but was really easy and it looks great! Especially if you sew straight, which I seem to have a hard time doing most of the time. 🙂

DSCN3424 (1)DSCN3423 (1)I was able to do the double top stitch seams on the shoulder seams, the sleeve seams and even the hood’s seams, but when it came time to double topstitch the underarm/side seams, I realized that would be impossible. Because the arm is a tube, there was no way I was going to fit the fabric under the presser foot and sew it. I tried to figure out a way to do the topstitching but could not. I turned to the internet for help, but pretty much everyone said the same thing that it could not be done with a normal home sewing machine.

There were a few suggestions on the internet for how to finish the seam but I was not thrilled with the answers. Pondering the possible ways to finish this seam, I stared at my serger and I shook my head. I have the tools, i.e. a serger, why not use it. So I serged the underarm/side seams to finish them. Because this is not a super heavy fleece, no issues occurred while serging it. I also used the serger to finish the edges on the facing. I could have just left the edge unfinished on the facings but that would have really bugged me.

DSCN3422 (1)For the hems, I folded and sewed the hems as usual but with out finishing the edge with the serger or folding the edges over. After completing the hems, I trimmed the edges close to the stitches as I did for the seam allowances so that all the inside seams matched. I did the same with the pockets opening edge.

Looking at the completed jacket, I liked what I saw from the outside. The top stitching looked great! From the inside though, the serged seams looked so much cleaner and finished than just the trimmed seams. But, I was not disappointed that I had done the double topstitched seams for the others. It was fun to try something different, plus I will have a new technique for sewing a heavier fleece that would not serge well in a later project.

This jacket was fun to make and turned out great!

So, am I in love with fleece again? The answer is maybe.

The cutting out of this pullover jacket was a real task, but the sewing was fun especially with applying the suggestions I had read about. I do see more fleece projects in my future so stay tuned.

Until then, fleece forth, and sports on!

Girl’s Fleece Jacket (Done Backwards) – Part 2

DSCN2088When I started this jacket, I decided to go ahead add the optional cuffs to the sleeves.

The cuffs looked so cute on the jacket on the pattern envelope, that I wanted this jacket to have the cuffs. But when it came time to sew the cuffs on, they were not turning out very well. They were just too bulky. The cuffs are made from two pieces of fleece. The first piece is sewn to the sleeve, then the next piece is sewn to the first piece and then folded over to make the cuff. I cut out the cuffs, sewed the cuffs to the sleeves and then removed the cuffs. In my opinion, this was a bad design for a fleece cuff due to so many seams in the cuffs and the bulkiness these seams caused. There are four layers of fleece in the top seam of the cuff, and that is just too many layers of fleece.

DSCN2084If I wanted to keep the cuffs, I had to come with a solution, so I gave it some thought and came up with some ideas.

First, the sleeves could be cut longer to make the cuffs. This would eliminating the bulky seams, but I had not cut my sleeves longer so this solution was out for this particular jacket. Another solution would be to use a thin lining fabric as part of the DSCN2086cuff, but I did not have it in me to dig through the stash to find a matching fabric. My third solution was to skip the cuffs, and make more bias tape. I would finish the edges of the sleeves with yellow bias tape to match the pockets. (My first thought was to use the bias tape to finish the edge of the cuffs, but eliminating only one of the layers in the bulky cuff was not enough.) So, I choose this as my plan. This jacket would not have cuffs, and I would finish the sleeves edges with the yellow bias tape.

Thinking back, I could have had cuffs on this jacket by combining the solutions. I could have used a lining fabric and the bias tape to make the cuffs and eliminate the bulk. Hmmm. Maybe I will try that on the next jacket.

DSCN3414By using the bias tape on the sleeves, I did not have to worry about a hem or the fact I had not cut the sleeves longer to accommodate a hem. I applied the bias tape to the edges of the sleeves, trimmed the seams and turned the bias tape to finish the seams. I noticed that the thin bias tape looked weak at the bottom of the heavy sleeves. The way I got rid of this weak look was to not trim the seam inside the bias tape so much, which was different from any other time I have applied bias tape. Previously, when I applied bias tape, I wanted the seam allowance trimmed out before folding the tape over. If the seam allowance was left inside the bias tape this time, the look was much fuller and it looked better.

DSCN3418It was now decision time. Which way did I want the jacket to cross, left over right or right over left? After a lot of thought and debating, I decided to cross the fronts as if it were a boy’s jacket, the left front on top of the right front. This will probably drive the little girl that wears this jacket nuts as she tries to button the jacket backwards, but the half froggy’s that I got from folding the jacket the other way just didn’t look good. Hopefully whoever wears this jacket won’t mind the backwards buttoning buttons if it is a girl.

I was dreading making the buttonholes on this jacket. I was not sure how my sewing machine would handle sewing buttonholes on fleece. Sometimes, even with thin non-stretch fabric, my sewing machine has a mind of its own when it comes to making buttonholes and sews whatever it wants to. To help combat this problem, I made horizontal buttonholes, and held my breath as the buttonholes were sewn, but my sewing machine did great and the buttonholes turned out just fine.

DSCN3413If I had known then, at the beginning of the sewing of this jacket, what I know now, nearing the end of the sewing of the jacket, I would have added piping to the peter pan collar to coordinate with the finished design of jacket. It would have been really cute to have had the bright yellow piping around the collar to match the piping on the pockets and the bias tape on the sleeve. This is definitely something I will keep in mind for the next jacket.

DSCN3416With the sewing on of the last button, the jacket was finally done!

The making of this jacket was a learning experience from the beginning to the end, from the cutting of the fleece, to the sewing of a back facing, to the piping curved pockets to the designing of the fleece cuffs. There were many lessons learned on this fleece jacket.

All in all, I think the jacket is very cute and I hope some little girl will be willing to wear it and will enjoy it!

Until next time, sew forth and fleece on!