Tag Archive | beak

Penelope or When A Picture Doesn’t Say A Thousand Words

DSCN3945It was love at first sight AGAIN when I saw the pictures of this pterodactyl pattern. The absolute cuteness in these pictures was causing me to pick this pattern as my next amigurumi project. Once I got started on the crocheting though, I could see that the pictures didn’t tell the whole story, so I will explain the missing parts.

Excited to get crocheting the pieces for this amigurumi, I easily picked out two shades of purple yarn and a cream yarn from the stash to make this pterodactyl. As I quickly read through the pattern, I could tell right away that is was not going to be an easy or fast pattern to crochet or stitch together. I still wanted to make it thought so I got started on it. I crocheted it from the bottom up, starting with the tail, legs and feet and then moving on to the beak and the body. All was going well until it was time to crochet the head and the crown.

DSCN3947Looking at the pictures in the pattern, there was a stripe of cream in the head and crown, but as I read the pattern it said nothing about a color change. Maybe the stripe was a separate piece that was to be stitched on after the head and crown were crocheted and stuffed? There were no instructions for such a stripe in the pattern. I studied the picture and reread the pattern, only to finally notice in the pictures that the cream stripe was the sun shining through the trees and on to the pterodactyl.

Sadly there were no color changes or a separate stripe on the head and crown, the pictures in the pattern had mislead me in believing there was. The only place the cream color yarn was going to be used was around the eyes. I thought about trying to add the stripe, but then I decided to just follow the pattern and make the head and crown one solid color with no stripes. I was not too disappointed that there was not a cream stripe in the head and crown because the pieces were crocheting up nicely.

DSCN3946When I came to the wings, I faced another picture dilemma. I crocheted the arms and wings last by following the instructions of the pattern. After completing the wings, I held them to the pterodactyl’s body and then looked again at the pictures. In the pattern, there were no real instructions or pictures for stitching this amigurumi together. You just had to figure it out on a wing and a prayer.

Per the pictures, it looked like the wings were attached to the body, but I could not figure out how to attach the wings versus how they were crocheted. I studied the pictures and twisted and turned the wings to no avail. Luckily the husband happened along. He had to study the pictures for a minute as well, but then concluded that the wings were attached to the arms, not the body. Only then did it make sense to me as to how the wings were crocheted versus how they were stitched on. It also explained why the arms were so long.

DSCN3950I started from the top to stitch the pterodactyl together, stitching the crown and beak to the head first. The safety eyes were only snapped on to the cream eye circles. The ends of the safety eye were inserted into the head and the eyes were stitched into place by stitching the cream eye circles to the head. The arms with the wings attached were stitched on next and then the tail.

I started stitching at the top because I wanted this pterodactyl to stand up. And I knew that I needed all its parts attached so that I could balance its weight on its legs and feet. I spent some time decided where to attach the legs to the body to get this amigurumi to stand. After attaching the legs and feet, I can with a lot of help and persuading get this pterodactyl to stand up by itself. There is just too much unbalanced weight between the crown, beak, arms, wings and tail for those little legs and feet to hold things very steadily, but it can stand if it wants to.

DSCN3953With all the pieces stitched together, this amigurumi took on a feminine side and became a girl. The husband and I debated back and forth about names, but finally settled on Penelope. I like the name and think Penelope the Pterodactyl turned out just as cute as the pictures in her pattern were, if not a little cuter. Hopefully, she can find a good home to fly around in.

Until then, crochet forth and fly on!

Advertisements

Pepper And Piper

DSCN3431 (1)Squeals of delight rang from my sewing room when I saw the pattern for these penguins. They were so cute, and the pattern showed pictures of endless possibilities in colors and variations for making a whole colony of penguins. I could not wait to get the crocheting started. I envisioned making several penguins in a variety of colors and belly spots.

DSCN3439 (1)I decided to start with a basic penguin with a gray body with no belly spot and black feet and beak. Crocheting the pieces went smoothly. When it came time to crochet the different colors of the head, I decided to cut and tie each color change. The last time I made a multi-colored head for Charlie the horse, I carried the yarn across the color changes instead of cutting and tying each color change, and I had to work very hard to keep my tensions even. Cutting and tying the color changes was easier than keeping an even tension, but it was time consuming, so it slowed down the crocheting process.

DSCN3438 (1)Before I stitched the first penguin together, I crocheted the next penguin in the colony. This time the penguin would have a gray body with a white belly spot and yellow feet and beak. Once again, I cut and tied the color changes in the head and now the body. If you look closely at the pictures, you will see a small “birth mark” on this penguin’s belly. I miss counted and did not notice my mistake until a couple of rounds later after several cut and ties were completed, and I did not want to undo all my work to fix that one stitch, so I am calling it a birthmark. It adds character to the penguin and in no way decreases his cuteness. Soon enough, I had all the pieces for the second penguin crocheted and ready to stitch together.

DSCN3436 (1)I picked up the yarn to start crocheting the next penguin in the colony, but then I decided to complete the first two penguins, whose pieces were already crocheted up, before starting another. The stitching together of these penguins was much easier than the stitching together of most my amigurumi’s. Because of the multi colored head, there was no question as to where the eyes were inserted, or where the beak DSCN2730was placed. On the second penguin, I had left a long piece of gray yarn from the head to stitch the head and body together. When I came to the white of the head and the belly spot, the gray stitches stood out badly. I had to stop the gray yarn and start a piece of white yarn to sew the white areas together and then return to the gray yarn to finish stitching the head and body together. On the first penguin, I had left I long black tail for sew from the body. This blended in well with both a gray and the white of the head. The color of yarn I leave for stitching is something I will have to keep in mind when I make amigurumi’s with multicolored heads and bodies in the future.

DSCN3432 (1)Because of the black heads, I stuffed the penguins a little lighter than most of the amigurumi’s I make. Usually, I over stuff my amigurumi’s. They say the stuff settles over time, so to over stuff at first. But, when you’re working with a dark color and white stuffing, the stuffing really shows through as the stitches are stretched by the over stuffing. Although, I really like no stuffing showing through the black stitches of the head, it was very hard for me stop stuffing before I thought the pieces were completely stuffed.

DSCN3434 (1)Feeling his head now that he is stitched together, I wish I had added just a little more stuffing to the first penguin’s head, especially in the back, but the second penguin is stuffed just right. The husband likes the less stuffing. I explained to him about the stuffing settling over time, but he still said that he liked the lighter stuff and he felt that the penguin’s still had enough stuffing to withstand the settling and a lot of be played with. It will be interesting to see if that turns out to be true or not.

DSCN3433 (1)With these two penguins completed, I picked up the yarn for the next penguin in the colony and asked the husband what color beak and feet I should crochet for this penguin and should it have a belly spot or not. The husband rolled his eyes and reminded me about all the fun patterns I have yet to crochet. And, he was right, I had already made this pattern, twice, and it was fun and the finished amigurumi’s were just adorable but other just as fun patterns are waiting in the wings.

I quickly named the two penguins Pepper and Piper and they are now waiting for a good home to go and live at.

I have tucked this pattern close to the front of my crochet pattern stash, and if and when the day comes that I want to complete the penguin colony or I just need a fun and simple amigurumi that turns out super cute, I know which pattern to reach for.

Until then, crochet forth and colony on!