Tag Archive | blouse

HaHaHaHa – Part 3 of Sew It Begins

With the husband’s latest shirt completed, it was finally time to sew a new shirt for myself.

I picked the design and fabric for my new shirt based on the embroidery design that I had picked out to use. I love this Snoopy design and I have always wanted to embroider it on a shirt for me. So, with the Snoopy design in mind I entered the stash room and picked a piece of blue cotton and a matching patterned cotton remnant for the fabric for this shirt.

After laundering the fabric, I laid it out on the cutting table and got started. I cut out the pieces from the blue cotton first, then I cut into the remnant only to find out that I was short on fabric. I must have measured incorrectly or the fabric had shrunk more than expected in the wash.

Regardless, this piece was too small to use now. Logically, I should have returned to the stash room and chosen another fabric but, oh no, not me. The challenge was on. My creative mind was churning. How could I get the needed pieces from this short piece of fabric?

I started by changing my idea of matching the pattern of the fabric at the side seams. I debated if not matching the pattern was a good idea, or if it would make me crazy after the shirt was sewn. Since the pattern on the fabric was a little crazy itself and it would be non matching at the seam under my arms, I decided to go for it and disregard matching the pattern.

Even with not matching the pattern at the side seams, I was still a little shy, about 2 inches, of having enough fabric for the sleeves. What could I do to get just 2 more inches? If I shortened the sleeves by an inch each, I would have my 2 inches, but I did not want my sleeves an inch shorter. So how could I cut the sleeves an inch shorter and still have them the same length?

Bias tape was the answer.

I cut the sleeves the inch shorter, but instead of hemming the sleeves, I made some 1/2 inch bias tape from the blue cotton and used the bias tape to finish the sleeves. The rest of the sewing of the shirt sewed smoothly and embroidering the Snoopy design was great fun.

I am very pleased with this shirt. It is fun to wear and I love having the Snoopy design on it. It was also a fun shirt to sew and it was exciting to let my creative mind work to solve a sewing problem.

With a new shirt done for both the husband and the me, it was time to pick a my next sewing project. Stay tuned to see what that will be.

Until then, Sew forth and Laugh on!

Advertisements

Creative Determining – Part 2

DSCN3986DSCN3987To begin the the sewing process of the Snoopy peplum top I started with the peplum first.

Since I was not going to line the peplum, I wanted to hide all the seams as much as possible, so I sewed French seams to piece the peplum together.

 

This was not difficult, just time consuming with a lot of ironing in between seams. I did a simple 1/2 inch hem at the bottom of the peplum to complete it.

Sewing the bodice was next. I decided at the last minute to add the yellow sleeves to the top. I like the yellow sleeves but as I snipped the curve of one of the sleeves I caught the lining and so I had to do a little mending. Luckily, the mended spot is on the inside of the top and cannot be seen from the outside. It should not affect the wearing of the top.

DSCN3998DSCN3989After gathering the peplum, I sewed the peplum to the bodice, making sure to line up the seams as much as possible. I serged this seam to finish it, rather than covering the seam with the lining and doing the stitch in the ditch seam.

The serged seam looks fine and saved me the headache of doing the stitch in the ditch seam.

 

I probably could have used the practice sewing the stitch in the ditch seam on this top, but sometimes just sewing the easy and simple way is fun too. And it’s much less stressful too!

With that, the little girl’s peplum top from the leftover Snoopy fabric scraps was completed!

DSCN3995DSCN3994The top is just adorable and the multiple seams in the peplum are really not that noticeable with the gathers.

This was a fun sew.

It is always fun to make something from nothing and to let the creative side flow to make it work.

Unfortunately, now that I have used up all the Snoopy scraps, I have at least a hundred projects that have raced through my mind that I could have made using the scraps.

Having said that though, I am not disappointed at all that I used these Snoopy scraps to make this top and at least they were put to good use!

Until then, sew forth and determine on!

Creative Determining – Part 1

DSCN3986There was no way that I was going to throw away any of the precious Snoopy fabric scraps left over from my new Snoopy shirt. The scraps really were not large enough to make anything with, not even for a child, but I just could not bear to throw them away. So, what to do with these scraps beside stack them on the edge of the cutting table and stare at them?

Recently, I have seen several little girls peplum tops that are just adorable and I have wanted to make one. So, looking at the Snoopy fabric scraps, I decided to see if I could squeeze a little girl’s peplum top out of the pieces. The size of top I would make would be determined by the dimensions of the scraps.

DSCN3813I didn’t really have a pattern so I turned to the internet for ideas. The first style of peplum top I found had a circular peplum. This was out of the question. The scraps I had to work with were absolutely too small to cut a circular peplum from. The second style I found was a gathered peplum. Hmmm. I might be able to make this work with the scraps.

DSCN3985Now, how long should the peplum be versus the length of the bodice? I saw a variety of bodice and peplum lengths from long bodices with short peplums to short bodices with long peplums and many hi/low peplums in between while I was searching. Once again, I would need to let the dimensions of the scraps determine the length of the peplum and the bodice and the scraps would also determine how full the gathered peplum would be.

DSCN3999Still not having a pattern, I pulled out my favorite little girls dress pattern as a guide. Based on the size of the largest scrap, I determined that I could get a size 4 bodice front and back from the scraps as well as have a few pieces left over for the peplum. I quickly picked some yellow cotton from the stash that matched Woodstock for the lining of the bodice.

To make the peplum, I squared the remaining scraps of Snoopy fabric I had and found that I had two pieces approximately 6 inches tall by 12 inches wide and 4 pieces that were 6 inches tall by 6 inches wide. (Actually, one of the 6 by 6 inches pieces was only DSCN39965 inches wide, but I could work with that.) With a lot of seam work, I determined that I could make these scraps work out for the peplum. I would sew the two 12 wide pieces together for the front of the peplum and sew the 6 inches pieces together for the back or the peplum.

I would not be matching any of the designs in the Snoopy fabric. There was certainly not enough scraps for that, but luckily with a gathered peplum, the non-matching designs as well as the many seams that I would be sewing would just be gathered in.

Excitement for this project grew, as I saw my almost useless scraps become a little girls peplum top!

Stay tuned for the sewing of the little girl’s Snoopy peplum top.

Until then, sew forth and scrap on!

Down In The Southwest

DSCN4029Waste not, want not, but as you know there is more to it when it comes to fabric scraps and remnants. It’s the challenge of making something from nothing and the creativity of making it work that gets you to use those scraps and to buy those fabric remnants from the bargain bin at the fabric store.

It was this challenge and creativity that got me to begin my latest sewing project.

DSCN4027I saw this southwest print in a stack of discounted flat fold fabrics and I just fell in love with it. I love the bright colors on the black background and the fabric has a nice weight and feel to it. But, there was just a little over a yard left. What could I make from that? The fabric would be ideal for me a shirt, but could I figure out how to piece it together with other pieces of fabric to make me a shirt? Color blocking ideas swirled in my head so I quickly purchased the piece of southwest print fabric and brought it home!

DSCN4033With a color blocking design in mind, I dug through the stash and found several pieces of fabric that I could put together with the southwest print to make me a shirt, but the deep blood red piece that I found was by far my favorite. But, as I went to cut the shirt out, I noticed that the red piece of fabric was terribly flawed.

What was such a flawed piece of fabric even doing in the stash?

I returned to the stash to select a different piece of fabric to use with the southwest print but now I did not like any of my other choices. I thought about going back to the fabric store to look for more red fabric but I was too disappointed to go. I took another look at the flaws in the red fabric to see if I could work around them. How could I make it work the way it was? After much thought, I came up with a new color block design that should work, but I would have to cut the southwest print perpendicular to the grain line.

Would it be ok to cut against the grain?

DSCN4022After much studying and reading about grain lines, grain, cross grain, welt and warp threads, I decided that yes it would be ok to cut my fabric perpendicular to the grain line as long as I was careful to cut on the cross grain just as I would be careful to cut on the grain line. At this point after fully researching the issue, it was finally time to cut the fabric.

The cutting process started with tracing my pattern and then cutting out new pieces for the color blocking. This took time and thought. I had to decide where I wanted the seams to be, add some seam allowances and then reshape the armscye and hem. With the new pattern pieces created, it was time to cut. I carefully cut the front and back pieces perpendicular to the grain line from the southwest print and the I carefully placed and cut my new side pattern pieces and sleeves around the flaws of the red pieces of fabric. With the pieces all cut out, it was time to sew.

DSCN4023The sewing process was going along smoothly until I noticed the flaw of the red fabric in the center of one of the sleeves. I thought I had cut so carefully around the flaws but I guess that I had not. I had no more non-flawed red fabric to cut out another sleeve with. Could I just pretend the flaw was not there? No, I would never wear the shirt with the flawed sleeve. Hmm, I wondered. Could I cover up the flaw with a little embroidery? Yes, that would work!

I picked a lizard embroidery design and some bright colors to match the southwest print and embroidered the design on the sleeve to cover up the flaw and it worked great! You can still see the flaw, but your eye is now attracted to the embroidery design instead of the flaw so no one ever notices it. Showing the husband my embroidery solution, he suggested embroidering another lizard on the other sleeve to balance out the design. So, I picked some more bright colors and embroidered another lizard on the other arm. With the lizard designs embroidered on each sleeve, it did not take long to complete the hems and sew on some bright southwest looking buttons to complete the shirt.

DSCN4026I was a little apprehensive about wearing this shirt at first with its bright colors and it’s multiple embroidery designs, but it did not take long to fall in love with the shirt. It is a lot of fun to wear! The color blocking, bright colors, and the embroidered designs make it highly unique. This shirt also fits well. The alterations to the pattern for the color blocking did not affect the fit.

I am very pleased with this shirt and have already worn it several times. I am now excited to make more projects with lots of color blocking and embroidery designs but minus the flawed fabric.

Until then, sew forth and lizard on!

Look WHOO’s Here For Thanksgiving!

IMG_2840
As I made my list this year of the many things that I am thankful for, I decided to include my fabric stash in the list.

YES! I am VERY thankful for my fabric stash!

Like a fine wine, it is a place for my fabric to age and rest until it is time to be sewn into something wonderful. It seems that the fabric I buy HAS to spend a certain amount of time in the stash to age and breath before I can use it.

That was not true for this fabric though…

Joann’s had a doorbuster sale on holiday fabric. At 60% off, how could I not buy some? Sitting on the doorbuster deal shelf was this cute Thanksgiving owl printed fabric. When I saw it, I knew I wanted a shirt made from it. So, I bought enough fabric to make me a typical shirt with it. Off I went straight home with it to the sewing room, bypassing the stash completely.

DSCN3819I pushed all of my other sewing projects aside and got started on my new Thanksgiving shirt straight away!

This was a very odd feeling for me…

Here I was ready to prep and cut this fabric within hours of purchasing it, and it had not yet spent its allotted time in the stash to properly breath and age. I blame the recently made Snoopy shirt for this reckless use of fabric on my part. After cutting and sewing such a precious fabric as the snoopy fabric, why not try using another recently purchased fabric?

I started the construction process by pre-washing the fabric and I am so happy that I did not skip this step.

This fabric shrank. A LOT!

DSCN3820I could still get my shirt from it but there would be little to no scraps remaining when I was done. After washing and ironing the fabric, I pulled out my collarless button front basic sloper pattern and the cutting process started.

Knowing that I had just enough fabric to make this shirt, I tried to cut carefully, but I did not cut carefully enough. I cut two right facings, and I did not have enough fabric left to cut a left facing. Since the facing on this shirt will not be seen, I thought about making the facings from a different fabric, but as I fiddled with the scraps of this fabric that was left, I determined I could cut the left facing from the scraps if I put a seam across the middle of the facing. Once again, since the facings will not be seen, I decided to try the seamed facings first. If it looked bad or was bulky or messed with the buttons or buttonholes, I could always cut out some new facings from a different fabric.

DSCN3821So with that, I began the process of sewing it into a finished garment.

The sewing of this shirt went smoothly. I have made this basic sloper many times without problems. When the shirt was completed, you would not have known that I had to piece the left facing together. The seam did not add any bulk to the front of shirt and it is in between the third and fourth button so no one will know it is there but me.

IMG_2870The shirt wore great as I gobbled down turkey, sweet potatoes and pumpkin pie in it on Thanksgiving Day.

The shirt is very comfortable and I have received a few compliments on it.

So with that I will add one more thing I am thankful for this Thanksgiving. I am thankful to have a fun Thanksgiving shirt for one of my favorite holidays. I am also thankful that I did not make this fabric spend a year or two in the stash before sewing it up into this shirt.

I have wore it all month long now and with November nearly over, I can’t wait for next year just so I can wear it again!

Until then, sew forth and gobble till ya wobble on!

Time To Say Goodbye, and Hello!

DSCN3535DSCN3537“He’s dead, Jim!” goes the often quoted line from Star Trek’s ever present with a quip Doctor “Bones” McCoy. And in this case, it’s as true as ever…

My favorite Snoopy shirt, made so many years ago, is finally dead. It is faded, thread bare and as of the last laundering, has a small hole at the back of the neck.

But at least I can say I have wore it everywhere!

 

It’s been to London, it’s been to France, and yes it’s even seen the Queen’s underpants! Well Elton John’s anyway! It been wore to work, at home, for parties, on vacations, just everywhere! But I can no longer wear it outside of the house in public again in this shape.

But for some reason I just can’t seem to stop wearing it!

It’s my SNOOPY shirt you see, and I just can’t seem to let it go…

So, to ease the pain of my not being able to wear this particular Snoopy shirt in public again, I decided it was time to open the box of my most precious fabrics, the Snoopy fabrics, and to use some of it to make me a new Snoopy shirt.

DSCN2792Luckily I did not even have to open the precious Snoopy fabric box to pick out the piece of Snoopy fabric that I would use to make this new shirt from as I had just purchased it at Walmart a couple of weeks ago and it hadn’t even made it to the box for storage yet.

I then debated about the style of shirt that I wanted this new Snoopy shirt to be.

Collar or no collar? Buttons or no buttons?

DSCN3447After making my last project, the fleece football pull over jacket, I decided to make this shirt in that style, but with no hood and just short sleeves.

I would use my basic t-shirt sloper pattern, but I would cut a slit in the front to get the shirt over my head and use facings to complete the neck line.

This would be a very simple design that would let the Snoopy fabric be the details of the shirt.

I had never made myself a shirt like this before, but it didn’t seem like it would be too difficult to make the changes to the pattern or to sew it up.

DSCN3541It was easy enough to prep this fabric for cutting, make the alterations to the pattern and lay it out, but when it was finally time to cut the fabric, panic and fear filled my heart and soul…

I would be cutting into this precious Snoopy fabric and what if I ruined it?
What if I cut it wrong?
What if I didn’t like the pullover design?
What if I messed up the alterations?

DSCN3539I could not cut into this fabric.

I just couldn’t.

So I decided that I would not be making myself a new Snoopy shirt after all, and that I would never, ever have another Snoopy shirt again.

SIGH!

But to console myself, I would always know that I had a box filled with Snoopy fabrics that I could sometimes visit and look longingly at behind it’s bulletproof glass in it’s hermetically sealed climate controlled room.

As I was folding up the Snoopy fabric to put it back in the box, the husband wandered into the sewing room to see my progress. I explained to him that I just could not cut into my precious Snoopy fabric so there would be no new shirt. He sympathized with me and I was done sewing for the day.

The next day, the husband made a secret trip to Walmart and bought me some more of the same Snoopy fabric. He explained that now I could make my new Snoopy shirt as planned and I would still have some of this Snoopy fabric carefully tucked away in the Snoopy fabric box.

AAUGH! Isn’t he the best?

DSCN3542Well back to work on the new shirt then!

Cutting out this shirt went smoothly. The sewing of this shirt also went smoothly. I carefully stitched and cut the the slit and sewed the neck with the facings.

I did put a small bar tack at the base of the slit to stabilize the slit. I thought for a moment about tacking the slit open, and maybe adding some buttons, but then decided not to. And soon enough, I had a new Snoopy shirt to wear!

YAY!

DSCN3543This newly designed Snoopy shirt has passed the “wear test” with flying colors!

This shirt is very comfortable to wear and I like the design and the slit. It’s very hospital scrub like in design.

And, everyone loved the Snoopy and Woodstock’s on the shirt. I am so happy that I made this shirt and that it turned out so well!

And I am especially happy that I have more of this fabric tucked away in the stash to use for something else later on.

The success of this shirt MAY just have encouraged me enough to pull another piece of Snoopy fabric from the box and make another shirt from it. I might even use a fabric that can not be replaced readily.

Maybe! That’s a BIG MAYBE! We’ll see.

Until then, sew forth and Snoopy Happy Dance on!

WWWHHHAAATTT!?! – The Minions – Part 2

DSCN2582I had already spent the appropriate amount of time worrying about making this minion shirt so it was easy to get started on it.

I really wanted this shirt to sew together without any problems, so I decided to take my time and think things through carefully. So after laundering and ironing the fabric , it was time to start cutting.

I cut very carefully and added the alterations that I wanted to the pattern as I cut. I was quite selective about the interfacing I chose to use and I went ahead and cut it out too.

DSCN2584As I started to sew, I realized that I did make one cutting/design error, well not really an error, but a small change to the design. In my mind, the shirt had the minion fabric on the right and the blue on the left, but I had cut the left front from the minion fabric and the right front from the blue fabric. Mmmmmm, was this going to look ok? After much thought, I decided it would look fine, and maybe better because the buttons would be on the solid blue fabric instead of lost in the the minions fabric.

DSCN2581The sewing when smoothly. I took my time and tried the shirt on after each step. I also ironed each seam carefully as it was sewn. As I serged the edges of the sleeves, preparing them to be hemmed, I did not notice that I I was running out of thread on one of my loopers. Once the looper ran out of thread, my serged edge was ruined. Luckily, I had debated about cutting 1/2 inch off the length of the sleeves and had not done so yet. So, I cut the 1/2 inches off the length of the sleeves ridding me of the bad serged edge, threaded new spools of thread on my loopers and serged the new edges.

With the sewing on of the final button, I declared the shirt done and tried it on. The fit seemed to be good, but as I looked at myself in the mirror, the shirt needed to be something else. The right blue front was just that, blue. I grabbed some scraps and started adding to the blue front piece.

DSCN2493At first, I wanted to add a stripe of minion fabric down the blue front, but that was too much of an accent. I thought about digitizing a minion embroidery design. But since I was too excited about wearing the shirt, and it would take time to perfect the design and I wanted to wear the shirt now. My next thought was a pocket. This would not be a functioning pocket, just something for show, so it would not have to be any certain size or style. I decided to make a temporary pocket and see how it looked pinned on.

DSCN2496To make the pocket, I cut out two squares of fabric and then rounded the corner on one end. Next, with right sides together, I sewed completely around the two modified squares. Next, I made a small cut in the fabric that would be inside the pocket. I turned the pocket right side out through this slit. After a lot of pressing, with a little seam to seam, I mended the cut that I made in the pocket to turn it inside out. This worked well and I had a finished pocket. Since I will not be putting anything in this pocket, I am not worried about the seam to seam mending holding up with wear and tear.

Placing the pocket on the blue front, I liked it, then with another look, I did not, then after a few minutes, I liked it again.

Argh!

DSCN2498I turned to the husband for his opinion and he said that he did like the pocket, so I sewed the pocket to the front of the shirt. I am still up in the air as to wether I like the pocket or not but it is sewn to the shirt for now.

The shirt has passed the “wear” test and I really like it. My alterations seem to be good. This shirt is fun to wear and is very comfortable.

It also makes me crave bananas for some reason…

Until next time, sew forth and banana on!