Tag Archive | Bunny

Silly Rabbit! Crocheting is for Long Car Trips!

DSCN2318What better way to whittle away the time of a long car trip than to work on a crochet project? Since I had a long car trip coming up, my next amigurumi project needed to be something that I could crochet in the car. This meant I needed a project that was larger in size than I normally do. A project who’s pieces could be crocheted now and stuffed later and wouldn’t need any stuffing during the crocheting process. A project with a simple count, not a lot of increases and decreases to keep count of or to loose count of when distracted. And, a project that was made from just a few colors so there would be less yarn to carry. After a bit of searching, I came across this bunny pattern. And since it seemed to meet all of my criteria for a car crocheting project, I was soon all packed up and ready to go!

DSCN2324As I crocheted the pieces of this amigurumi, it did meet the needed criteria. The pieces were coming out a nice size while crocheting with my favorite G size hook. The pieces did not need to be stuffed as I crocheted them which was nice. And except for the soles of the feet, and the increases in the head for the cheeks, the piece’s counts were even and it did not take a lot of concentration to keep the count correct. With just two colors needed, I only had to work with two skeins of yarn to crochet all the pieces. Plus, the opening of the head was large enough that I could complete the crocheting of the head and still get the safety eyes and nose put in later. This was truly a great car project!

DSCN2322Upon arriving home, it was easy to start the stuffing and the stitching together of this bunny. The pieces stuffed nicely, and soon I was pulling the button joints. Button joints are becoming one of my favorite ways to attach amigurumi project arms and legs. I did have one problem with pulling the button joints. Some how I got a knot in the stuffing or yarn as I was pulling the leg joints. It left a small dent in the bunny’s belly where it pulled. I tried to undo what I had done but I couldn’t. I tugged and pulled the bunny’s belly, trying to work the dent out but I had little luck with that. I finally decided to just leave the dent and to learn my lesson of being more careful as I pulled the yarn for future button joints.

DSCN2327When it came to the smile, I tried several different styles, including an open smile with a top and bottom lip using two strands of yarn but a simple line with a little curve was the best. I opted for a fluffy white pompom for the tail rather than the crocheted tail like the pattern called for and I also left off the belly spot that the pattern had. The bunny in the pattern had a crocheted purple spot on his belly. I crocheted the circle but when it came time to stitch it on, I did not like the look on my bunny, so my bunny does not have a belly spot.

DSCN2329A name for this bunny never came to me through the entire crocheting and stitching process, but the husband quickly named the finished bunny Trix because it reminded him of Trix the Rabbit from the cereal, so this bunny’s name is Trix.

He was very fun to make and he turned out just adorable in the end.

He also made a long car ride much more enjoyable. I don’t have another car trip planned for the near future but if I did I would probably make another one of these bunnies!

Until then, crochet forth and ride on!

In The Hoodie

DSCN1257Even though Leftovers the bunny turned out so cute and I love his turtle neck bulky yarn sweater, I still wanted to make a version of bunny with the hoodie from the pattern. This lead me to my next amigurumi project, another bunny from the same pattern but this time with a hoodie.

DSCN1252Instead of looking for a specialty yarn to make the hoodie, I just picked some good old Red Heart yarn, and since it was almost time for my relay for life raffle donations, I picked breast cancer pink as the color.

The pieces of this bunny were easy to crochet especially since I had made the pattern before. I crocheted all the white parts, the ears, head, and legs but after finishing the body with the pink top, I realized that I had underestimated the amount of yarn I needed yet again. I was not going to have enough of the pink yarn I was using for the sleeves on the arms and to finish the hoodie.

DSCN1250This time though, I had used a normal Red Heart yarn so I could easily get more if I needed some. I first turned to the stash where I have numerous skeins of pink yarns, but guess what? None of the pink skeins in the stash matched the pink I was using. I would need to go to the store and buy more yarn to match the pink yarn or undo the body and use another pink. Bemoaning either of these options, the husband stepped in. He looked at the pink skeins of yarn in the stash and picked one he said was close enough. Hmmm. I had enough of the pink I was using for the hoodie but not the sleeves. Was this other pink close enough? I decided to go for it and see. So, I crocheted the hoodie next.

DSCN1253The hoodie crocheted up smoothly. The pattern is well written and easy to follow. To make certain I was on the right track as I crocheted the hoodie, I stitched the head, ears, and body of the bunny together so I had something to try my hoodie on. I was able to crochet the entire hoodie from the current pink yarn I was using. I then crocheted the arms of the bunny with the other pink yarn and stitched the arms and legs to the bunny. The husband was right. If you know I used two different pink yarns and look really closely, you can see the difference. If not, the second pink yarn matches the first pink yarn just fine.

With the bunny stitched completely together, I pulled the hoodie on and handed the bunny to the husband. After inspecting the bunny, he said that the hoodie needed to be bigger, at least one more row around the bunny’s face. Now, how was I going to add one more row around his face since it was made out of the that pink yarn that I had ran out of?

DSCN1248The answer was a white decorative edge all around the hoodie, around the face and the neck, and to make the hoodies ties white as well.

I tried a couple of different decorative stitch edges around the hoodie, but I finally settled on just a simple half double crochet. It was easy to do and it added a simple but decorative edge. The husband liked the extra white row as well.

DSCN1255I debated about whether to leave the hoodie removable or stitch it permanently to the bunny’s head. The pattern did not stitch the hoodie to the head and after bugging the husband about it repeatedly, I decided to leave the hoodie removable. Since I expect a child to play with this bunny and to remove the hoodie often, I had the husband give the ears a good tug to make sure they were secure and would withstand the hoodie being pulled on and off repeatedly.

DSCN1242I’m not really happy with the hoodie, and to me, it looks like a bonnet, but that might be because of the pink or the white decorative edge, or because it is removable. The bunny is still very cute though, with or without the hoodie/bonnet on, so I am not too disappointed with the end results. I think some little girl will really enjoy playing with this bunny. I do see another bunny with a hoodie in my future. Next time though, I will use a dark color or gray for the hoodie and no decorative edge and maybe stitch it to the neck so it can be taken off the head but not removed. We will see.

Until then, crochet forth and hoodie on!

Leftovers

DSCN1114“Can you use this?” asked my mother as she tossed me a small ball of brown toned bulky yarn left over from her last project. “Sure I can!” I answered as I tossed the yarn ball into my stash. Since I only crochet amigurumi’s, I can always use small bits and pieces of yarn. I just needed to wait for the right pattern that would use a small amount of brown bulky yarn to come along, and it finally did. When I saw this pattern for a bunny in a hoodie, I knew it was time to dig this ball of bulky yarn out from the stash and put it to good use.

DSCN1116Because I would be working with this bulky yarn for the hoodie of this bunny, I decided to crochet the pieces with my H hook instead of my G hook that I normally use to make amigurumi’s. I picked white as the color for the bunny, but as I reached for my white skien of Red Heart yarn, I remembered the abandoned white pieces of the bad Snoopy pattern that I had given up on. Since I was using left over yarn from Mom for the hoodie, why not see how much yarn was in the left over pieces from the abandoned Snoopy project and use it up too.

DSCN1115I was surprised at how much yarn was in the white abandoned pieces and how much of the bunny I was able to crochet using these pieces. I was able to crochet the legs, ears, hands, the bottom of the body and half the head before I had to get my skien of white yarn to finish up. I should not have been surprised how quickly I ran out of the brown bulky yarn though. After crocheting the arms and the body, I did not have enough bulky yarn left over to make the hood. I did have enough of the bulky yarn to make a collar for what would now end up being a sweater rather than a hoodie. After completing the bunny, I decided that I really like his bulky sweater and I am not unhappy at all that he does not have a hoodie.

DSCN1117I gave the bunny a small pink nose, a little smile and tiny whiskers as well as a small pom pom tail at the bottom back of his sweater. And I jokingly named him Leftovers, since he was made from left over yarn, but now the name is starting to stick so I think I will keep it.

I have only one problem. I have a tiny bit of the bulky yarn left. I would say about 6 yards. Not enough for another project but too much to throw away. I have thrown this last bit of left over yarn away a dozen times and then dug it out of the garbage a dozen times. To keep or not to keep it, that is the question. It is currently sitting on my cutting table as I debate its fate. Any suggestions on what to do with a tiny amount of left over yarn? Please let me know if you have any great ideas for it!

Until then, crochet forth and left over on!

I Need To Hide This Pattern

IMG_0151There is yarn all over the place!

Recently I have not been putting my yarn away as I complete a project, so it has just been sitting helter skelter on my cutting table in piles, and I decided I should take some time to tidy up a bit. But as I started to put the yarn back into my yarn stash, I remembered the fun little pocket pals I made awhile back when I was learning how to fuzz yarn. These pocket pals were a quick crochet and there wasn’t a lot of stuffing or stitching to them, and they came out super cute. So, rather than packing all this yarn up only to get it right back out again, I thought that I should just use a little more of it up and make some more fun pocket pals with it instead.

P1040460The first yarn I saw on the cutting table was the variegated yarn left over from making the jellyfish. Looking at the pocket pal pattern, I could not decide which animal I would make from this variegated yarn. Then my creative mind spoke to me. How about a monster? Awesome idea! But, what details could I add to make it a monster? Horns and big eyes was the answer that I came up with.

I crocheted up the pieces for the monster from the variegated yarn and then found a pattern to use for the horns from a devil pattern that I want to make this year for Halloween. I then crocheted the horns from the variegated yarn as well, but when it came time to stitch the horns to the monster, the husband stopped me. He said I needed to make the horns a P1040257different color so that they stood out more. He chose white for the color. I was unsure about the white horns on this monster but I crocheted the white horns up anyway and then stitched one on. And I liked it! So I removed the variegated horn and attached the other white horn. Now, I had a perfectly good pair of variegated horns with no pocket pal to stitch them to, so I decided to make a white monster for the variegated horns. Now it was time for the eyes and mouth. I wanted to use these big googly eyes I had purchased a long time ago and just had not found the right project to use them on. The variegated monster was the right project. With his one big eye, he needed a big smile. I tried several smaller eyes on the white monster, but the big eye was the best and once again the white monster got a big smile to go with the big eye too.

P1040449The next yarn that caught my eye was the gray yarn left over from the mouse. There was not much of this yarn left either and rather than return it to the stash, I decided to just use it up and make a pocket pal with it too. I had planned to use the ear pattern from the mouse I just made to make the ears for the pocket pal, but, because the gray yarn was limited and I did not want to try and match colors, I added the gray yarn to the pink center as an additional round rather than making a gray ear and a pink ear and stitching them together as I did the mouse’s ears. This worked just fine for the pocket pal mouse’s ears.

P1040416As I put away the other skeins of yarn on the cutting table, I came across my big skien of pink. You might ask, what have you made recently from pink? Yes, there was a small amount of pink used for the mouse’s ears but why did you get out the big skein for that and not just use some scraps? Well I did use some pink scraps for both the mouse and pocket pal mouse’s ears but the big skein was out for the relay for life teddy bear I had made recently for a charity auction. I try to make something to donate to relay for life each year and this year I picked a pink teddy bear with a purple nose and purple buttons made from the button jointed teddy bear pattern that I have made twice before. He stitched up smoothly and having done the button jointed pattern before, they were no problems to make it again. And he turned out so cute once completed! I just love this pattern. I hope someone will like him well enough to buy him at the event.

P1040443But back to the pocket pals. I decided to make a pink pocket pal bunny from the big skein of pink. The pattern for the bunny’s ear was in the pocket pal pattern already and it crocheted up just fine. In no time at all I had a cute pocket pal bunny made. I decided to fuzz up the yarn on this bunny so I got out my brushes, and with a few strokes of the brushes, I had an adorable cute fuzzy bunny all done.

What pocket pal should I make next I thought to myself? A chick? A cat? More monsters? But, as I planned my next pocket pal, I realized that I had so many patterns that I still want to make that it was time to put away my yarn and the pocket pal pattern and start my next new amigurumi project instead.

Until next time,

Crochet forth and pocket pal on!

Here Comes Peter Cotton Tail on a Beautiful Easter Dress

IMG_0133Spring is finally here! And, with spring comes Easter.

And, what would be more fun to sew than a beautiful new Easter dress?

Since I would not be wearing an Easter dress anywhere this year, I decided that for my next sewing project I would make a little girl’s Easter dress. I still had the pattern from the last little girl’s dress that I had made laying on my cutting table, and I had wanted to make another version of this dress pattern, but while incorporation some of the things that I had learned from making the first dress, it was a very easy decision to use this as the pattern for the little girls Easter dress.

Easter dresses are usually very fancy with lots of ruffles and lace, but by picking this pattern, this Easter dress would be very basic. I could have added all of the ruffles and lace to this pattern but I decided not to. Rather than this dress being an Easter dress that would only be wore for a couple of hours one time on Easter morning, I thought it should be a fun dress with Easter bunnies on it that could be worn the week before Easter and then all day on Easter and after Easter was over too. Hopefully, it would be a fun dress that any little girl would enjoy wearing in the springtime!

P1040268Because of the pattern that I chose, it was easy to select the Easter bunny cotton fabric I had on hand as the dress fabric. This was a remanent I had picked up at Joann’s last sale that had not even made it to the stash yet. And for the lining fabric, I grabbed the yellow lining that I had used for the first dress. I thought that it worked well enough for the lining of the last dress and it matched the purple color of the dress fabric. Plus using it would save me a trip to the stash to look for some white lining fabric.

Cutting out this dress went smoothly but I did make some changes to it as I cut. I cut the bodice lining 1/2 inch longer, making it longer than the dress fabric. My hope was that the extra 1/2 inch of length would help with the “stitch in the ditch” seam when finishing the waist. Having a little more fabric to fold up should help if this slippery lining fabric started to unfold as it did on the first dress while it was being sewn. Hopefully this would help keep the raw edges from being exposed. I also decided while I was cutting out this dress to not stitch the lining and dress fabric together at the hem as I did before. I would hem the lining and the dress fabric separately. With this in mind, I cut the lining 2 inches shorter than the dress fabric so that there was no chance it would hang below the dress fabric after being hemmed.

P1040272Once it was all cut out I followed along with the pattern guide to make this dress the same way I had on the first dress. This time though I used the serger which I did not use on the first dress. I serged the bottom of the lining of the bodice. In doing so, I hoped that it would give me something to feel through the dress fabric as I “stitched in the ditch” at the waist as well as give a finished edge so that if the lining slipped while “stitching in the ditch” and was just barely caught, it would be catching on more than just a raw edge. Because I was not hemming the lining and the dress fabric together this time, I needed to finish the seams of the skirt and lining. I finished these with the serger as well as serging the hems before hemming. It had all worked well up to this point and as I had said, it was crazy not to use my available sewing tools to make a project better and easier. I used the floss method of gathering again because it had worked so well on the first dress.

P1040181The skill I needed to work on from the last dress was the finishing of the lining at the waist after the gathered skirt was attached to the dress fabric bodice or what I keep referring to as the “stitch in the ditch” seam. As mentioned, I had already taken measures to help assure the success of this seam by cutting the bodice lining longer and serging the edge. After pinning the lining to the bodice and getting ready to sew this seam, I could tell I was in for another disaster. The slippery lining was already falling out of place in between the pins. So I decided that I needed to rethink this. What could I do to hold the lining in place as I stitched on the dress fabric? The answer was to use some Seam to Seam adhesive paper. I cut 1/4 inch strips of Seam to Seam paper, stuck one adhesive side to the seam allowance of the skirt and bodice and then stuck the folded bodice lining to the other side. I then pinned the seam together again and headed for the sewing machine. At this point with all of my preparations, the sewing of this seam went smoothly. After completing it, I only had one spot where the lining had slipped and was missed by the seam and that was in a spot where I had skimped on using the Seam to Seam. One might say that using the Seam to Seam adhesive is a cheat and is not learning this sewing skill properly, but I say, hey, use the tools that are available to you. Plus, it still wasn’t a perfect seam. More practice is needed.

P1040271With the dress completed, it needed a little something to make it an Easter dress, so I decided to add a belt and tie to the waist. This would have been much easier if I had decided to add the belt and tie earlier in the sewing process, but I didn’t so I improvised it as best I could. To make the belt and tie, I measured the front bodice and cut a piece of white scrap to that length and made it 3 inches wide. Then, with the remainder of the white scrap, I cut two pieces as long as I had fabric by 3 inches wide. I then seamed these together to make one long piece of fabric. Folding the fabric lengthwise, I stitched the piece, turned the tube, and finished the ends. I lined the horizontal seam up with the side seams and then stitched it. I was going to stitch up one side seam, across the top of the tie on the bodice and then down the other side seam, then across the bottom, but when it came to stitching across the bottom, across the gathers of the skirt, I stopped. This was not going to work. If I had been stitching the belt and tie on while sewing the dress I would have put the bottom of the tie at the bottom of the bodice instead of over the skirt, but that did not happen. So instead I decided to leave the bottom unstitched. This does not look good on the hanger but I believe when the dress is being worn that the tie will be pulled tight and it will look fine. I wish the ties were longer but that was how big my scrap pieces were so that is length they are.

I am not as pleased with the belt and tie as I thought I would be but since it was an after thought on this dress, I think it is fine. Actually, the more I look at the tie the more I like it. I think the Easter dress turned out to be very cute. I have some bad news though. The little neighbor girl has moved away and I have lost my model for my kids clothes. So, I can’t tell you if leaving tie unstitched at the bottoms is ok when the dress is being worn. I am also unable to find out if it is preferred to have the dress fabric and lining hemmed to together or if having them hemmed separately is the way to go. I am going to have to find another 5 year old girl to wear my creations.

Until next time, sew forth and sew on!

Happy Easter

.P1030265

With Easter being so early this year, I had decided early on to not make any amigurumi’s for the holiday this year. But when I came across the pattern for these googly eyed easter eggs and bunny, I changed my mind. This project became a must do for some reason! I just fell in love with the pictures on the pattern and I could not wait to make my own eggs and bunny.

.P1030240

The pattern said to use a size 3 hook, but you know me, I used my favorite size 4 or G hook instead. But who cares if they are a little bit bigger than the pattern called for? Not me! In fact, “who cares” became the theme of this project. Who cares if the bunny is a little lope sided? Who cares if the eyes are a little bit crooked? Who cares if the smiles are off slightly from the eyes? These little guys were supposed to be lop sided, and crooked and off center. That’s what makes them so much fun! And, that is what made them so much fun for me to crochet and stitch up.

.P1030163

These guys did end up being a little time consuming in the end though. Crocheting the pieces and stuffing them were no big deal but the small details on them did take some time to finish. They have a lot of small felt pieces that need to be cut out and glued on. After I had cut out all the felt eyes, eyebrows, nose and teeth, I invited the husband to a glue party and he helped me to glue all the felt pieces onto these guys in one go. I could have used safety eyes instead of felt but since it is a meant for a decoration, and not a toy for a child, I decided on the felt. Plus with felt eyes I could make the eyes different sizes and shapes and make everything look just the way I wanted.

.P1030244

So what do you think? Have you fallen in love with these crazy googly eyed easter decorations like I did?