Tag Archive | double

Yay Sports! Go Team!

DSCN3421 (1)IMG (1)I am certainly not a big sports fan, and I am especially not a big football fan, but I am a BIG fan of fabric. So, you know, when I saw this football fleece on clearance at Joann’s and I also had a coupon for even more off the already low reduced price, you just knew I was going to buy some of it. And even though I may not be a big football fan, I am sure there is some one out there that is, and would want me to make something for them from this fleece.

In trying to fall in love with fleece again, I did some reading on the internet and I found some suggestions for sewing with fleece. I wanted to try out a couple of the suggestions, so I pulled out this football fleece and a simple pattern, Kwik Sew 3235, for a pullover fleece jacket. In making a pullover jacket, I won’t have to worry about buttons or a zipper, and I could focus on the seams and the suggestions I had read about.

DSCN2561DSCN2797I could not decide which size between a medium or large that I wanted to make, but as I mentioned in a previous post, the fabric decided for me. I would be making a medium pullover jacket. Also as previously mentioned, this pattern was not very easy to cut out due to the fabric. I had to really work to keep the footballs and helmets straight. When I cut out the pocket, I purposely did not match the design because I wanted the pocket to stand out from the rest of the jacket’s design.

With my pattern pieces cut out, I started the sewing process. The first suggestion I followed was to put a new needle in the machine. The suggestion said to make sure it was a ballpoint needle. I only use Schmetz universal needles so that is what I sewed it with and it did great. The next suggestion was to lengthen my stitch length because of the bulk, which I did. When it can time to iron it, I followed another suggestion of using a press cloth so I could iron the fleece a little more aggressively without hurting the fleece.

DSCN3426 (1)DSCN3429 (1)One article I read suggested three different types of seams that worked well for sewing fleece, a fake flat fell seam (sometimes called a faux flat felled seam), a lapped seam or a double topstitched seam. I was not impressed with the lapped seams but wanted to try the other two seams. As I started to sew, I found that I wanted to just sew double top stitch seams so that the seams matched. The double top stitch seam is sewn by first sewing your seam as you normally would, then sewing the seam allowances down close to the edge of the seam allowance, then trimming close to the seam allowance stitching. Since fleece does not fray, cutting close to the stitches finishes off the seam. On the top side, there is a cool double row of stitching encasing the seam. This is a fun look that looks like it took a lot of effort to sew but was really easy and it looks great! Especially if you sew straight, which I seem to have a hard time doing most of the time. 🙂

DSCN3424 (1)DSCN3423 (1)I was able to do the double top stitch seams on the shoulder seams, the sleeve seams and even the hood’s seams, but when it came time to double topstitch the underarm/side seams, I realized that would be impossible. Because the arm is a tube, there was no way I was going to fit the fabric under the presser foot and sew it. I tried to figure out a way to do the topstitching but could not. I turned to the internet for help, but pretty much everyone said the same thing that it could not be done with a normal home sewing machine.

There were a few suggestions on the internet for how to finish the seam but I was not thrilled with the answers. Pondering the possible ways to finish this seam, I stared at my serger and I shook my head. I have the tools, i.e. a serger, why not use it. So I serged the underarm/side seams to finish them. Because this is not a super heavy fleece, no issues occurred while serging it. I also used the serger to finish the edges on the facing. I could have just left the edge unfinished on the facings but that would have really bugged me.

DSCN3422 (1)For the hems, I folded and sewed the hems as usual but with out finishing the edge with the serger or folding the edges over. After completing the hems, I trimmed the edges close to the stitches as I did for the seam allowances so that all the inside seams matched. I did the same with the pockets opening edge.

Looking at the completed jacket, I liked what I saw from the outside. The top stitching looked great! From the inside though, the serged seams looked so much cleaner and finished than just the trimmed seams. But, I was not disappointed that I had done the double topstitched seams for the others. It was fun to try something different, plus I will have a new technique for sewing a heavier fleece that would not serge well in a later project.

This jacket was fun to make and turned out great!

So, am I in love with fleece again? The answer is maybe.

The cutting out of this pullover jacket was a real task, but the sewing was fun especially with applying the suggestions I had read about. I do see more fleece projects in my future so stay tuned.

Until then, fleece forth, and sports on!

Advertisements

Sammy the Seal

DSCN2357DSCN2358It didn’t last long, but then it never does.

I broke my current crocheting criteria of only making patterns that I have had for a while, but that I could never seem to get made. The minute I saw this new pattern for this seal, I knew that I wanted to make it and it became my next project.

Even though I have piles of old patterns that I have been trying to get around to making, for some reason I just wanted to make this one instead and so I did.

The pieces for the seal crocheted up without any problems and I enjoyed the process. The pattern was well written and easy to follow. The stuffing and stitching together of the pieces went smoothly as well. It was a little odd for me to not stuff the flippers of the tail but to put stuffing in the tail portion only. I thought about stitching a line between the tail and the flippers just to keep the stuffing in the right spots, but the stuffing seemed to stay where it was suppose to, so I did not stitch the line. The seal’s nose and mouth were easy to design but his whiskers took some work to get just right. The pattern had 3 big long whiskers but in the end I liked my 2 short whiskers better.

DSCN2340DSCN2155When it came time to crochet the hat and scarf, I had a little trepidation. The seal had been turning out so cute without the hat and scarf, so why go to the trouble of making them? But, as I looked at the pictures in the pattern, the hat and scarf added to the seal’s cuteness, so I decided to get crocheting and get them made too.

The hat was easy to crochet. It was crocheted in rounds just a little bit larger than the head with double crochets for the last round to give it an edge. When it came time to make the pompom for the top of the hat, I had to have the husband help again. I could not get the knot tight enough to keep the yarns from just falling out of the pompom. The husband was able to tie the knot tight enough and the pompom came out really cute. My hat is a little squarish. If and when I make another hat, I will vary the increases in the round to keep it a little more rounded.

DSCN2335DSCN2285I liked the scarf that I made for the Hello Kitty so much that I decided to make the seal’s scarf the same way instead of following the pattern for it. I made a chain of yarn to the desired length, then double crocheted back to the other end. Next, I changed to the white yarn and slip stitched around the double crochets and chains. I was concerned about how the back of the scarf would look in the places where it would be seen when the scarf was tied to the seals neck, but the tied on scarf looks great.

I used a dab of clear fingernail polish on the yarn ends of the hat and scarf to finish them off. The nail polish will seal the ends so that if this seal is played with, there will not be any yarn ends coming loose. I thought about stitching the hat and scarf to the seal but then I decided that if the seal is being played with, that being able to remove the hat and scarf might be more fun for someone.

DSCN2184DSCN2158This seal was a fun and quick project that turned out so very cute. It was easy to pick the name Sammy for this seal. What else would you name a seal? With Sammy the Seal completed, I will again return to my crocheting criteria of picking my next project from patterns I have been longing to make. Unless another more fun pattern pops up first that is!

Until then, crochet forth and seal on!

Hello Kitty

DSCN2341I debated about it a long time, but I finally decided to crochet a Hello Kitty for a coworker/friend of mine. She just adores Hello Kitty. I have seen a couple of patterns for Hello Kitty during my internet pattern browsing and they all look very cute. So I picked one that I thought my coworker would like and got started on it.

DSCN2280The pattern that I picked has Hello Kitty in a dress with a scarf and of course the bow on her ear. The red dress and scarf gave the Hello Kitty a Christmas type of vibe, so I thought about changing the color of the dress and omitting the scarf, but the husband liked the red dress and the scarf so I decided to follow the original design and colors of the pattern.

I started with the legs as I like to do when I am crocheting an amigurumi. In this pattern the legs and body are crocheted as one piece. I followed the pattern and the little feet and legs came out so cute, but when I got to the body and finished crocheting the body’s last row, something was not right. 

Where was the rest of the body? I re-read the pattern again. No, I had not miscounted. This short stubby piece on top of the legs was the body. I debated about adding more rows but then decided to crochet the other pieces and see how it all looked before I started modifying the pattern.

DSCN2157The arms and ears were crocheted next and then I got started on the head. Crocheting the head took some time and concentration. It took a lot of counting while crocheting. When I finished the head it looked so funny and misshaped to me. I wondered if I might be in an alternate universe or something where everything that should be right was wrong. 

I was beginning to have second thoughts about completing this project, but I decided to press on instead. After a lot of debating and the husband’s help I got the eyes inserted and then I started to stuff the pieces.

IMG_1787Stuffing the head presented another challenge. It would have been easy to overstuff the head and make it round but Hello Kitty’s head is flat like the rest of her body. So, I had to stuff the head with enough stuffing that it was full and firm but still flat which was very unusual to me. 

When I finally got all the pieces stuffed to where I liked, I laid all of the pieces together on my cutting table. I was not pleased with what I saw. The head was misshaped and it looked funny with the short stubby body and the long legs. At this point, I really wanted to abandon this project and move on to another project, but I had too much invested in both time and yarn in this amigurumi to quit. So I soldiered on.

DSCN2350As I started to stitch the pieces of this Hello Kitty together, she finally started to come to life. Her head did not seem as misshaped once her ears were actually stitched on to her head. And her body was not as stubby once it was stitched to her head and it was even less stubby once I had crocheted her skirt to her body.

At this point, I did deviate from the pattern. I wanted to crochet her bow instead of cutting one from felt. I followed the same pattern I had used previously to make a bow tie but I made it smaller. With some red yarn, I chained four then crocheted 3 in rows till I had the desired length I wanted for the bow. I then folded the ends to the center and stitched them together. Because of the smaller bow, I did not crochet the center piece of the bow but simply wrapped the red stripe with white yarn to make the bow.

DSCN2273For the scarf, I did not count how many chain stitches I started with. With some red yarn, I chained until it looked like the right length around Hello Kitty’s neck and called it good. Next I crocheted once around the long chain, then slipped stitched around the edge with white yarn. I think both the bow and the scarf turned out very cute. As I stitched them to Hello Kitty, she took on a personality and came to life even more.

Stitching on Hello Kitty’s whiskers and glueing on a pink round felt nose were the finally touches to complete this Hello Kitty.

DSCN2352Even though there were multiple times I wanted to tuck this project away with other UFO’s (Un-Finished Objects), I am glad I did not.

It the end, she turned out to be very cute I think!

I gave my coworker her Hello Kitty and she thought it was adorable and that did my heart good. 

It made be think about the UFO’s I still have tucked away. Maybe with a little more work, they could turn out to be as cute as this Hello Kitty did. 

Maybe I had better pull them out of their hiding place and see.

Until then, crochet forth and Hello Kitty on!

Being Biased – Part 3 – Button Fitting

DSCN1300I believe I have fallen in love with bias tape.

Even though, I had a number of trial and tribulations in the making of and the sewing on of the bias tape with these tops, I can see were bias tape can be a fun accent to many sewing projects and I can’t wait to start another bias tape project.

But before I do that I needed to finish these cross back summer tops before the summer has ended so that the girls can actually get some use out of them.

All I needed to do to finish them was to add buttons and buttonholes to the back of the tops and they would be done and ready to wear.

Sounds easy enough, doesn’t it? Well, I wish would have been as easy as it sounded.

DSCN1303I knew when I cut this pattern out that this pattern does not have a true side seam. I did not think it was going to be a big deal, but it was!

The backs are cut so that the shoulder and side seams are towards the front of the top. There is no seam directly under the armscye or on the shoulder. It is just to the side of the armscye and front of the shoulder.

This pattern also has no indication of where the buttonholes should be placed. So, when it came time for me to determine where to sew the buttonholes and buttons, I had some guessing to do. DSCN1304

I started the guessing by trying to determine where the true side seam would have been on these tops. Should the back come towards the front of the top a little, like 1/2 inch, or a lot, like 2 inches.

Next, I had to determine if the cross over should match at the top and leave a big “V” at the bottom of the back or should the “V” of the cross over be smaller by lowering the top. I spent hours measuring, folding, pinning, and deciding where to put the buttons and buttonholes.

I would think that I had it all ready to sew, then I decided that it wasn’t right and I would start again. After awhile even the husband grew tired of me showing him each variation that I tried. He tried to help, but I just could not make up my mind if I had it right or not. DSCN1302

Finally, I reached a point were I truly believed that I had it measured, folded and pinned where I wanted the buttons to be so I went to the sewing machine. I carefully sewed the buttonholes and buttons in place on both tops.

When I was done, I was quite pleased with myself until I held the tops up and the back curve of the cross over flopped down over one of the special buttons I had paid a lot of money for. Crap! The buttons needed to be higher on the top.

Now, how was I going to fix this? Version 2

My first thought to solve this problem was to sew a hook and eye to the curve which would attach the curve to the back of the top. This would keep the curve from flopping over but that did not work. When the curve tried to flop over, you could see the hook and eye and it looked worse than the flopping curve of the fabric.

My next thought was to use some velcro. As I went to sew the velcro on, the husband asked what I was doing. I showed him the flopping curve and how I was trying to fix it. He said to stop. He said that since girls were sisters they could keep an eye on each other’s backs when they were wearing the tops and if the curve flopped, they could fold a crease in the bias tape so that the curve would not flop as much. This seemed like a reasonable solution to the flopping curve, so I left it at that.

20150530_124144The REAL answer to this whole problem was to have the girls try the tops on before I placed the buttons.

I could have quickly determined where the “side” and “shoulder” seams should be, how big the “V” in the back should be and where the buttons needed to be. But, I had wanted the tops to be a surprise for them so I didn’t. Even though they had picked out the fabric, they did not know what I was making from it. Plus, with them not knowing what or when I was making something, there was less pressure to get the tops completed.

With that all in mind, I determined that the surprise and less pressure to get the items completed were not worth the button/buttonhole headache, and with this lesson learned, the next time I make something for the girls, there will be fittings during the process. Version 2

Upon receiving the tops, their mom says the girls like them and will wear them. I explained to their mom the button/floppy curve issue and she said it would not be a problem.

I don’t believe that the girls were nearly as excited about these tops as they were their fun vests or their Dr Who bags, but that is ok because I learned a lot from these tops both in the sewing process itself and in the process of sewing for others. 20150530_124000

And the next time I sew for the girls, I am getting them involved in the process.

No more surprises!

I want them to pick their own fabrics, colors and styles. I want to measure them so that I have the best fit, instead of using a year old measurement that their mom took (no offense to their mom), and I want fittings and alterations done during the sewing process.

I think I will learn even more sewing for them this way and they will have exactly what they want as well. Plus NO more guessing!

Until then, sew forth and bias tape on!

Being Biased – Part 2 – The Sewing of the Bias Tape

DSCN1308I gave the process of sewing of the crossed back summer tops a lot of thought before I made the first seam.

I had read the pattern instructions, but I wanted to sew the top together with fitting in mind. I wanted to sew the seams so that the minimal amount of unpicking would be necessary if I needed to alter the size of the tops for the girls later. So, my plan was to start with sewing on the bias tape before sewing the shoulder seams or the side seams. After the bias tape was sewn on, I would sew the bias tape together with the shoulder and side seams as one single seam. That way if I had to alter the shoulder seams or the sides seams of the top, I only had to unpick a little bit of bias tape to get to the seams. This was a great plan until I thought about how I wanted to sew the bias tape on.

DSCN1298In deciding how I wanted to sew the bias tape on, did I want to sew the tape to the right side of the fabric and then fold it to the wrong side and stitch in the ditch on the front so that no seams were showing? Or, did I want to sew the tape to the wrong side and fold it to the right side and then stitch the tape with a decorated thread or stitch?

Since I was already mixing colors by using the pink bias tape on the purple top and visa versa, I choose the second option for sewing the bias tape on. So, my final sewing plan went as follows: I would sew the bias tape to the wrong side of the fabric and would then fold the tape to the right side after sewing the bias tape together with the shoulder and side seams. I would then top stitch the tape with the opposite color thread, i.e. sew the purple bias tape on with pink thread and visa versa. Sounds like a solid plan, right?

Well, this did not work as planned.

DSCN1295Because of how I had sewed the bias tape on, when I folded it to the right side the bias tape was needed to be sewed together opposite of the shoulder and side seams. If I had sewn the bias tape the other way that I had thought about doing it and folded it to the wrong side, my seams would have worked. But, instead of my plan working, I got to unpick several inches of each piece of the bias tape so that I could sew the bias tape together, then I could sew the shoulder and side seams together and then sew the bias tape back in place on the wrong side. Finally, I could fold the bias tape to the front and do the top stitching. All these little seams were flustering and extremely time consuming to sew and lets face it, not a lot of fun to do! But, I finally got it done and I had completed the sewing of the first top.

DSCN1306I wanted to sew the second top with the bias tape folding the same way as the first so I returned to the pattern’s instructions. I started by sewing the shoulder and side seams together first and then I sewed the bias tape on the wrong side of the top. Next I folded the tape to the right side and then top stitched the tape on. This went much faster and easier than the sewing of the first top had with no little seams to deal with. An with that the second tops sewing was complete.

I had four opportunities to learn the best way to start and stop the bias tape. I tried several ways but the way that folded and stitched the best for me was to leave a small piece of bias tape unstitched where I started. When I reached the end of the seam for the bias tape, I folded the ending piece of bias tape back on itself. I then laid the starting unstitched piece on top of the folded ending piece and then sewed this in place. When I folded the bias tape over, the starting pieces folded into the folded ending piece to make a finished start and stop of the bias tape.

DSCN1313The idea of sewing the bias tape to the wrong side of the top and then folding the bias tape to the front and top stitching in a contrasting thread sounded great, but in reality, sewing the bias tape on the right side and folding it to the back and stitching in the ditch with a matching thread would have hid a lot of sewing sins.

The top stitching looks good for the most part, but anywhere were my seams were not exactly straight, the contrasting thread announces the wavy seam LOUDLY. Also the starting and stopping of the seams don’t look that good. This is especially true where I was learning how I wanted to start and stop the bias tape.

DSCN1299The sewing of the tops would have been a lot easier and cleaner if I had sewn the bias tape the other way, sewn to right side and then folded to the back. I also could have followed my fitting plan. But, I had sewn the bias tape the other way and many lessons were learned, so it made the whole experience a good thing. Plus, the tops were looking good with the contrasting colors and threads. So, with the tops sewn, it was time to add on the buttons and buttonholes.

Join me next time to see how they turned out once they were completed!

Until then, sew forth and bias tape on!

Being Biased – Part 1 -The Making of the Bias Tape

IMG_1621My coworker’s tween girls are using and enjoying their Dr Who bags and it does my heart good for someone to enjoy and use something that I have made.

So much so, that it was easy to find another pattern to sew for them next. This time I made them a summer crossed back top from some sugar skull fabric that they picked out. I found this crossed back top pattern on line for free. It looked like a fun summer shirt, easy enough to sew and the right size for the girls.

I gave the girls their choice of a couple of fabrics that I had in the stash and they both picked the sugar skull fabric. I did not have enough sugar skull fabric to made both shirts so I planned to piece the tops with some black fabric from the stash.

Then I thought about it being summer. DSCN1296These were summer tops made to be worn in the heat of the summer months, so how could I make them from black fabric? So I dug through the stash and I found some nice pink and purple that would match the sugar skull fabric.

I decided to make one top from the pink and one from the purple so the girls would not have to match. I know that teens are image concious that way. The pattern is only two pieces, a front and a back, cut twice. Based on the girls measurements, I cut the front and back 1/4 inch wider and 1 inch longer than the pattern called for. The pattern also called for 3 yards of 1/2 inch double folded bias tape. I

f I had been making the tops with the black fabric, I would have bought the needed bias tape, but since I was using the pink and purple fabric, I decided to make the bias tape. 61NeRAwqLEL._SY450_Then I had the idea of using the pink bias tape on the purple shirt and the purple bias tape on the pink shirt to give them some great contrast, so I would definitely be making the bias tape myself. Plus, it would give me the opportunity to make bias tape again, and as you know practice makes perfect and I don’t use bias tape all that often.

Now, I thought I had the process down for making bias tape from the last time I made it for another project, but I was incorrect. I had a lot to learn and relearn while making this bias tape. I started out by cutting 1 inch strips on the bias. When it came time to sew the bias strips together, I knew that they needed to be sewn at a 90 degree angle, but I kept sewing the strips together backwards, one seam up and then one seam down. After much trial and error, I figured out that I needed to sew one strip on top, then the next strip on bottom to keep all the seams all on one side. 71f-MxnZmTL._SY450_

After getting all the bias strips sewn together correctly, I started to iron and shape them. I used my 1/2 bias tape maker and was making some beautiful bias tape, when I realized that my bias tape was only single fold.

What? Darn! I needed double folded bias tape!

So I folded my beautiful 1/2 single fold bias tape in half and got 1/4 inch double folded bias tape, half the size of what I needed. Crap! I seriously thought about just using the 1/4 inch double fold bias tape that I had made but I decided against it and started all over again.

This time, I cut 2 inch strips on the bias, sewing them together correctly as I had learned to do earlier, and I prepared to iron again, but not until I purchased a one inch bias tape maker.

Looking on Amazon for bias tape makers, I found two types, Singer brand made completely from metal, and several third party brands made of metal with a plastic insert.

Which was better? DSCN1310

After reading many reviews and pondering the question, the husband rolled his eyes and ordered me both the Singer and another brand with the plastic inserts. After trying both styles of bias tape maker, I decided to use the Singer metal ones. Even though both worked fine, I just liked the Singer ones better. They seem to fold the fabric more evenly and were easier to push the fabric into the maker when starting out.

After a fair amount of ironing, I had 4 yards of 1/2 inch double folded bias tape in both pink and purple, ready to sew on. I made 4 yards of each color rather than 3 yards like the pattern called for because I had increased the size of the tops slightly from what the pattern called for.

Now it was time to sew the bias tape on to the tops.

Stay tuned for the construction of the crossed back summer tops in my next post!

Until then, sew forth and bias tape on!

We Interrupt This Sewing Plan….

DSCN1278I needed to do some basic sewing. With summertime on the way, I needed some new work shirts to wear. So, I set my next project aside to make me some simple basic t-shirt style shirts to wear to work. But as with all sewing, there are always lessons and patience to be learned. Let me tell you the story.

I started by picking out some knit fabric from the stash. The first piece I picked out was a purple single knit with white sea shell designs that I had picked up from a thrift store many years ago. The piece was not quite big enough for the shirt I was making but I figured I could make it work. I tend to make my shirts long, so if I made this shirt just an inch shorter than I normally did, I would have just enough fabric. So I cut out the shirt and started to sew it up. The sewing went fine until it was time to hem it.

DSCN1280Some how I had cut the front of the shirt very crookedly. I laid the shirt on the cutting table and evened out the front but in doing so I cut off even more of the front length of the shirt.

This minus the inch to fit the fabric now left me with a very short front.

I went to cut off the back of the shirt to match the front, but hated to lose the length so I decided to leave the back longer than the front. Because of the slit in the side of my shirts, there would be no problem to hem the back of the shirt slightly longer than the front. After hemming the shirt, I liked the uneven hem. After wearing the shirt, I REALLY like the uneven hem. When wearing the shirt, I can really tell that the front is shorter than I like but since the back is longer, I am willing to wear the shirt.

DSCN1284The next fabric was white interlock knit with a black and red scattered design that I had also purchased at a thrift store many years ago. This time though there was plenty of fabric so I cut out generous hems for this shirt. The shirt sewed up fine and I liked the fit. The double needling of the hem gave me some hassle though. The fabric wanted to bunch under the needles, so I had to sew it VERY slowly, but it all worked out in the end. After wearing the shirt, I could have made the shirt a little shorter and the hems a little smaller. But the shirt is still comfortable to me, so I’m not going to mess with a good thing and modify the shirt.

DSCN1288The third shirt was made from a very stretchy knit I purchased on the internet. I love the fabric. It is soft and has a nice feel, but it was a challenge to sew. I carefully cut out the shirt, trying to not stretch the fabric as I cut it. I even put the walking foot on my machine to help keep the fabric from stretching as I sewed it up.

I sewed this shirt very slowly, trying not to pull the fabric but the fabric was so stretchy that it did not matter how careful I was. The first seams, the shoulder seams, finished long and distorted. Previously in my sewing career, I would have continued to sew as carefully as possible and hoped for the best in fit when the shirt was completed. Now that I have been sewing for awhile and am more experienced, I knew that if I wanted a wearable shirt, I had to solve the stretchy seam problem so I turned to ribbon.

DSCN0384I pulled a roll of 1/4 inch white ribbon from the closet, and cut pieces to fit my shoulder seams. After unpicking the previously sewn shoulder seams, I placed the ribbon on the shoulder seams and sewed down the center of the ribbon. With the ribbon, using the walking foot and sewing very slowly and carefully, I was able to sew nice, non-stretched shoulder seams. I then used the ribbon in the sleeve seams and it worked great as well. I did not use the ribbon on the side seams because the stretch of the fabric was not as much DSCN0421on those seams.

For the hem, I sewed the ribbon to the bottom of the fabric first then turned up the hem and completed it with the double needle. It would have been easier to have sewn on the ribbon as I double needled the hem but sewing it first meant I did not have to worry about catching the ribbon with the double needle and I could control the stretch better.

DSCN1289I tried to us the ribbon on the facings at the neck, but it did not work out. I could not keep the neckline from stretching and distorting as I sewed the facings on. It finally dawned on me to cut the facings from a woven non-stretch fabric instead of from the stretchy fabric of the shirt to solve the problem. This worked great and I was able to sew a nice looking neckline. I have worn the stretchy shirt and it is vey comfortable although it is odd sometimes when I expect it to stretch at a seam and it does not because of the ribbon in the seam.

With three new shirts added to my working wardrobe, I am ready to get back to my previous sewing plans and start my next project.

Until then, sew forth and summer on!