Tag Archive | faux

Applying The Lessons Learned

IMG_0016After being so pleased with the construction process of the dinosaur vest, and then so flustered by the construction of the ant jar vest, I wanted to make another vest. And in the process I wanted to apply the lessons that I had learned and to end the vest making process on a more positive note.

So, I grabbed some more bottom weight scraps from my pile and some monkey printed flannel and I got started! As I laid out the fabric to cut, I spied some pleather that I had waiting to make its way it to the stash. Oh yes! I would give this vest a pleather collar and welt pleather pockets to step up the style!

DSCN3956With the design completed, I started to cut out the fabric. Because I was working with scraps, I did not have a single piece big enough to cut the back of the vest on the fold, so I would need to add a back seam to this vest. A back seam would not affect the wear or the construction of the vest so I saw no problems in having a back seam. Applying the lessons learned from the previous vest constructions, I remembered to cut the extra inch for the buttons on the fronts of both the top fabric and the lining. I also remembered that I wanted to add some interfacing to the pleather the next time I used it. Soon, I had all the pieces cut out, interfaced, and I was ready to start sewing.

DSCN3957The first step in the sewing process was the embroidering of the monkey design. Remembering the lessons learned from before about placement, I thought long and hard about the placement of the embroidery design versus the size of the design and the collar before I finally hooped the fabric and stitched the design. When the design was completed, I saw that I was not going to have an issue with the collar covering the design. If fact, I had over compensated and I was wishing that the design was a little higher than it was. Even though, the monkey design is the best placed embroidery design I have done on these vests, I still have a few placement lessons left to learn.

DSCN3700The next step was to sew the pleather welted pockets. As I debated about the placement of the welts, the husband peaked over my shoulder to see what I was doing. When I showed him the pleather welts, he said no, that I should make patch pockets like on the dinosaur vest from the pleather. I explained to him that I already had the welt pockets cut out and interfacing applied to the pleather welts, but he insisted that I should cut new patch pockets from the pleather instead. Since I know that the husband has a good eye for design I followed his lead and cut out some new patch pockets from the pleather and sewed them on the front of the vest. The pockets came out great! The pleather was easy to sew and the pockets look very good on the front of the vest. Plus, the monkey embroidery design sits at the top of the pockets so it is now not too low.

DSCN3702When it came to the pleather collar and the pockets, I remembered lessons learned about using a press cloth to iron the pleather. I top stitched the edge of the collar so that it would match the stitching on the pleather patch pockets. The rest of the sewing process went smoothly, even the stitch in the ditch seam of the band.

When it came time for the buttons and buttonholes, I applied the lessons learned from the previous vest’s buttons and buttonholes. I decided not to have a button at the top of the vest, but to place the first button so the vest was open as I expected the vest to be worn. I then spaced the other buttons appropriately. The buttons looked like they were in the right place and there was no seam issues when sewing the buttonholes.

DSCN3963I am super pleased with the end results of this vest! It is just adorable!

And as much as I hate to say it, the husband was right and I just love the pleather patch pockets!

The pleather patch pockets are just perfect with the monkey embroidery design and the pleather collar.

Plus, I am super pleased with myself for remembering and applying the lessons learned from previous sewing projects.

I hope some little girl will enjoy wearing this vest as much as I have enjoyed making it. With the success of this vest, I am ready to more on from vest construction to other sewing projects, but I will happily make more vests at anytime.

Until then, sew forth and apply your lessons learned on!

Oh! That’s Gonna Leave a Welt… – Part 2

DSCN0977Continuing on from my first part of the welt pocketed jacket project, the rest of the jacket sewing went smoothly.

I used pleather for the collar as well as the pockets and it all sewed up great! Because the zipper was not inserted into the collar, there was no hand stitching and I was able to finish off the collar with some twill tape. I also remembered to press the pleather with a press cloth on both the pockets and the collar so that the iron did not damage the pleather. Before long the sewing was done and the jacket was complete.

With the jacket completed, I studied it closely and something was not right.

DSCN0981I stared at and studied the jacket until I finally figured out what that something was. The neckline on this jacket is HUGE! It is way too big around. I returned to the pattern, but as far as I could tell, I had traced and cut the pattern pieces correctly. Had I sewed something wrong or was it the pattern? I had a few options to try and fix it. I could try to fix the neckline, but for a trial jacket, I was not willing to spend the time and energy on a fix, especially to find out that the fix didn’t work or made things worse. Disappointed, I thought about not embroidering on the jacket, but then decided that some kid somewhere would be willing to wear this jacket, and he or she would need something fun embroidered on it to distract from the huge neck line.

DSCN0922Picking an embroidery design for this jacket was not an easy task. Since I did not know who the final owner of this jacket would be, I tried to make it as unisex as possible, but each embroidery design I picked swayed the jacket to the feminine or masculine side. I looked and debated over many designs until I finally realized that I was wasting all my sewing and embroidery time picking out the design. I finally went back to one of my first choices and embroidered The Lady and The Tramp design on the jacket. The jacket is definitely for a girl now but I love the design on it.

DSCN0982I am still not happy with the collar on this jacket, but I am very pleased with the welt pockets, the pleather accents and the embroidery design.

Ultimately, I am happy with the end results of this jacket and hope that there is a young girl out there willing to wear this jacket even with the oversized collar. I am super excited about learning to make welt pockets and I cannot wait to start another project with welt pockets!

Until then, sew forth and welt on!

Oh! That’s Gonna Leave a Welt… – Part 1

DSCN0977I decided that is was time to try making welt pockets.

Welt pockets always look so nice and professional, plus I had something special I wanted to try for the welts. One day while shopping at Walmart, I saw a couple of bolts of patterned pleather and I knew right away that it would be perfect to make the welts for the welt pockets from. I quickly purchased some, and headed for my sewing room.

First, I needed a pattern. After looking through my pattern stash, I turned to my Kwik Sew books on the shelf.

Yes, there were jacket patterns with welt pockets and instructions in these books. I was super excited and ready to get started!

Next, I had to choose a fabric for the jacket. I had a bright yellow sweatshirt fleece hiding in the stash and debated if pleather and sweatshirt fleece would look good together. I finally decided that they would, especially for a first try of welt pockets. It was easy to pick out some left over scraps from one of my shirts for the body of the pockets.

DSCN0827DSCN0830And I decided to make a size 8 jacket because of the length of the zipper I had. I would need to lengthen the jacket a little to accommodate the zipper, but I didn’t think that would affect the wearing of the jacket.

The first step in making this jacket was to see if pleather would survive the washer and dryer.

It did! And beautifully I might add!

The next step was to see if my sewing machine would sew the pleather or if I was going to require a special foot, needle and thread for sewing the pleather. I did not. The pleather sewed beautifully with just my normal pressure foot, regulars thread and a new Schmit universal needle.

DSCN0833DSCN0836Wow! I had read horror stories on the internet about sewing with leather but I guess pleather is different, or maybe just these particular pieces. Regardless, I was excited!

With the pattern traced and the fabric cut, it was time to get sewing.

To sew the welt pockets, I started with some scraps to get an idea of what I was doing, then I moved on to the jacket.

DSCN0838DSCN0842I started by applying a pieces of interfacing with the sewing lines to the front of the jacket. Next, I taped the pleather in place and then O sewed around the lines.. I taped it because I did not want to scar the pleather with pins. Cutting was next and then pulling the pleather to the wrong side to form the hole for the pocket. Then I folded up the welt and sewed it in place, and then I attached the body of the pocket to the pleather and finally I sewed around the body of the pockets.

DSCN0848DSCN0844Soon enough, I had completed the two welt pockets. They are not perfect but they were fun to make and I really like the results especially with the pleather.

I debated about interfacing the pleather of the welt but I thought that the pleather was stiff enough to not need interfacing. As I inserted my hand into the pocket, past the welt, I wished that I had interfaced the welt and made it stiffer to withstand use over time.

I had pictured the welts as being bigger than they finished up being. Knowing now how to make welt pockets, I feel that I can make the welts in different sizes and styles the next time I make something with welt pockets.

Coming up next, the completing of the jacket.

Until then, sew forth and welt on!

Yay Sports! Go Team!

DSCN3421 (1)IMG (1)I am certainly not a big sports fan, and I am especially not a big football fan, but I am a BIG fan of fabric. So, you know, when I saw this football fleece on clearance at Joann’s and I also had a coupon for even more off the already low reduced price, you just knew I was going to buy some of it. And even though I may not be a big football fan, I am sure there is some one out there that is, and would want me to make something for them from this fleece.

In trying to fall in love with fleece again, I did some reading on the internet and I found some suggestions for sewing with fleece. I wanted to try out a couple of the suggestions, so I pulled out this football fleece and a simple pattern, Kwik Sew 3235, for a pullover fleece jacket. In making a pullover jacket, I won’t have to worry about buttons or a zipper, and I could focus on the seams and the suggestions I had read about.

DSCN2561DSCN2797I could not decide which size between a medium or large that I wanted to make, but as I mentioned in a previous post, the fabric decided for me. I would be making a medium pullover jacket. Also as previously mentioned, this pattern was not very easy to cut out due to the fabric. I had to really work to keep the footballs and helmets straight. When I cut out the pocket, I purposely did not match the design because I wanted the pocket to stand out from the rest of the jacket’s design.

With my pattern pieces cut out, I started the sewing process. The first suggestion I followed was to put a new needle in the machine. The suggestion said to make sure it was a ballpoint needle. I only use Schmetz universal needles so that is what I sewed it with and it did great. The next suggestion was to lengthen my stitch length because of the bulk, which I did. When it can time to iron it, I followed another suggestion of using a press cloth so I could iron the fleece a little more aggressively without hurting the fleece.

DSCN3426 (1)DSCN3429 (1)One article I read suggested three different types of seams that worked well for sewing fleece, a fake flat fell seam (sometimes called a faux flat felled seam), a lapped seam or a double topstitched seam. I was not impressed with the lapped seams but wanted to try the other two seams. As I started to sew, I found that I wanted to just sew double top stitch seams so that the seams matched. The double top stitch seam is sewn by first sewing your seam as you normally would, then sewing the seam allowances down close to the edge of the seam allowance, then trimming close to the seam allowance stitching. Since fleece does not fray, cutting close to the stitches finishes off the seam. On the top side, there is a cool double row of stitching encasing the seam. This is a fun look that looks like it took a lot of effort to sew but was really easy and it looks great! Especially if you sew straight, which I seem to have a hard time doing most of the time. 🙂

DSCN3424 (1)DSCN3423 (1)I was able to do the double top stitch seams on the shoulder seams, the sleeve seams and even the hood’s seams, but when it came time to double topstitch the underarm/side seams, I realized that would be impossible. Because the arm is a tube, there was no way I was going to fit the fabric under the presser foot and sew it. I tried to figure out a way to do the topstitching but could not. I turned to the internet for help, but pretty much everyone said the same thing that it could not be done with a normal home sewing machine.

There were a few suggestions on the internet for how to finish the seam but I was not thrilled with the answers. Pondering the possible ways to finish this seam, I stared at my serger and I shook my head. I have the tools, i.e. a serger, why not use it. So I serged the underarm/side seams to finish them. Because this is not a super heavy fleece, no issues occurred while serging it. I also used the serger to finish the edges on the facing. I could have just left the edge unfinished on the facings but that would have really bugged me.

DSCN3422 (1)For the hems, I folded and sewed the hems as usual but with out finishing the edge with the serger or folding the edges over. After completing the hems, I trimmed the edges close to the stitches as I did for the seam allowances so that all the inside seams matched. I did the same with the pockets opening edge.

Looking at the completed jacket, I liked what I saw from the outside. The top stitching looked great! From the inside though, the serged seams looked so much cleaner and finished than just the trimmed seams. But, I was not disappointed that I had done the double topstitched seams for the others. It was fun to try something different, plus I will have a new technique for sewing a heavier fleece that would not serge well in a later project.

This jacket was fun to make and turned out great!

So, am I in love with fleece again? The answer is maybe.

The cutting out of this pullover jacket was a real task, but the sewing was fun especially with applying the suggestions I had read about. I do see more fleece projects in my future so stay tuned.

Until then, fleece forth, and sports on!