Tag Archive | Free

Invested

DSCN1372DSCN2485 (1)Do you ever have a pattern speak to you when you see it?

Me! Me! Me! Sew me next! Sew me next! Pick me! Pick me!

Well, this pattern did not just speak to me, it screamed at me!

The minute I saw this free vest pattern on the internet, I abandoned all of my other sewing plans.

Since I could not ignore its request to be sewn next, a boy’s vest became my next sewing project.

DSCN2491DSCN2492What caught my attention about this vest pattern was the endless creative possibilities that it presented.

From the fabric I would use to make this vest, to the type of pockets I would sew, to the embroidery and details I would stitch, there were dozens of designs decisions to be made.

First off, I picked the fabric. I choose some sport weight scraps for the outer layer of this vest and some flannel for the lining.

I did question using flannel for the lining though.

The smooth slippery fabric of a lining helps with taking an item on and off. Flannel is not smooth or slippery and would actually make it more difficult to pull an item on and off.

But, since this is a vest, i.e. without sleeves, I figured the flannel would be fine to use. Plus, it would add a layer of warmth to the vest, and as an added bonus, I would be using some of the flannel hiding in the stash and most importantly, I could incorporate the print of the flannel with the embroidery design that I would be stitching on it. So, it was not difficult to pick the dinosaur flannel fabric for the lining and a dinosaur embroidery design.

DSCN1364DSCN1365When it came to deciding on pockets, I liked the patch pockets that were used on the pattern so I decided to make them.

The pockets are not just typical patch pockets so there would probably be something new for me to learn from sewing them.

I started the process by downloading the pattern, printing it out, taping it together, cutting it out, and then throwing it away. Yes, you read that right. I threw it away.

DSCN1373DSCN2488As I laid the pattern pieces on the fabric, I did not like the way they looked at all. I couldn’t get the shoulder seams to match and the armscye looked misshaped.

I could see many problems occurring during the sewing process using that pattern and I did not want to waste my time or fabric on a doomed project.

I was disappointed to say the least.

I was so excited to make this vest and I had already put so much planning into it’s design that I did not want to just abandon the project.

So I turned to my pattern stash and what do you know! Lying right on top was a jacket pattern, Simplicity 8902.

Could I possibly use this jacket pattern to make a vest by just leave the sleeves off?

DSCN2487DSCN2486 (1)I did not know the answer to this question but I was certainly willing to find out.

I began to cut out the pieces for this vest from it. Since I was going to use buttons instead of a zipper, I added an extra 1 inch to the front pieces.

I also ironed on a strip of interfacing to this extra inch to strengthen it for the buttons.

My first step in the sewing process was to sew the pockets on the front of the vest.

Embroidering the dinosaur design was next. Then I sewed the shoulder seams and collar. It was then that I realized I should have reversed these steps. The collar is slightly covering the top the embroidery design. If the design had been any bigger, it would have been hidden under the collar.

The next time, I will sew the shoulder seams and attach the collar first and then embroider the design placing it so the collar is not in its way. Then I will attach the pockets last.

DSCN1368DSCN1369This way I will have no problem hooping the fabric for the embroidering without the pockets on the front, and after embroidering, I can place the pockets over the fabric that was hooped.

The original vest pattern had a bottom band. I liked the look of the band so I decided to keep it on this vest, so I cut the vest and lining 2 inches shorter than the pattern called for to accommodate the bottom band. Because of the bottom band, it was easy to sew the lining to the vest.

With right sides together, I sewed around the vest and lining before sewing the side seams then turned it inside out and sewed the side seams. After a lot of pressing, I sewed the band to the front side of the vest and lining and then folded it to the back and stitched in the ditch to finish up the band.

DSCN1374DSCN2490 (1)The last step was to sew the buttonholes and buttons.

I sewed vertical buttonholes so that my buttonholer would not have to move over the pockets. I don’t believe that vertical buttonholes will make a difference in how the vest wears.

In the end the vest turned out absolutely adorable!

I just love it, and it was so much fun to design and make that I can’t wait to make another one.

I have not given this vest to anyone yet so I do not have a “wear test” to tell me whether a jacket without sleeves makes for an acceptable vest, but it looks good to me.

I could always make the armscye a little bigger on the next vest to ease my mind and the fit.

So until the next time, sew forth and vest on!

Being Biased – Part 3 – Button Fitting

DSCN1300I believe I have fallen in love with bias tape.

Even though, I had a number of trial and tribulations in the making of and the sewing on of the bias tape with these tops, I can see were bias tape can be a fun accent to many sewing projects and I can’t wait to start another bias tape project.

But before I do that I needed to finish these cross back summer tops before the summer has ended so that the girls can actually get some use out of them.

All I needed to do to finish them was to add buttons and buttonholes to the back of the tops and they would be done and ready to wear.

Sounds easy enough, doesn’t it? Well, I wish would have been as easy as it sounded.

DSCN1303I knew when I cut this pattern out that this pattern does not have a true side seam. I did not think it was going to be a big deal, but it was!

The backs are cut so that the shoulder and side seams are towards the front of the top. There is no seam directly under the armscye or on the shoulder. It is just to the side of the armscye and front of the shoulder.

This pattern also has no indication of where the buttonholes should be placed. So, when it came time for me to determine where to sew the buttonholes and buttons, I had some guessing to do. DSCN1304

I started the guessing by trying to determine where the true side seam would have been on these tops. Should the back come towards the front of the top a little, like 1/2 inch, or a lot, like 2 inches.

Next, I had to determine if the cross over should match at the top and leave a big “V” at the bottom of the back or should the “V” of the cross over be smaller by lowering the top. I spent hours measuring, folding, pinning, and deciding where to put the buttons and buttonholes.

I would think that I had it all ready to sew, then I decided that it wasn’t right and I would start again. After awhile even the husband grew tired of me showing him each variation that I tried. He tried to help, but I just could not make up my mind if I had it right or not. DSCN1302

Finally, I reached a point were I truly believed that I had it measured, folded and pinned where I wanted the buttons to be so I went to the sewing machine. I carefully sewed the buttonholes and buttons in place on both tops.

When I was done, I was quite pleased with myself until I held the tops up and the back curve of the cross over flopped down over one of the special buttons I had paid a lot of money for. Crap! The buttons needed to be higher on the top.

Now, how was I going to fix this? Version 2

My first thought to solve this problem was to sew a hook and eye to the curve which would attach the curve to the back of the top. This would keep the curve from flopping over but that did not work. When the curve tried to flop over, you could see the hook and eye and it looked worse than the flopping curve of the fabric.

My next thought was to use some velcro. As I went to sew the velcro on, the husband asked what I was doing. I showed him the flopping curve and how I was trying to fix it. He said to stop. He said that since girls were sisters they could keep an eye on each other’s backs when they were wearing the tops and if the curve flopped, they could fold a crease in the bias tape so that the curve would not flop as much. This seemed like a reasonable solution to the flopping curve, so I left it at that.

20150530_124144The REAL answer to this whole problem was to have the girls try the tops on before I placed the buttons.

I could have quickly determined where the “side” and “shoulder” seams should be, how big the “V” in the back should be and where the buttons needed to be. But, I had wanted the tops to be a surprise for them so I didn’t. Even though they had picked out the fabric, they did not know what I was making from it. Plus, with them not knowing what or when I was making something, there was less pressure to get the tops completed.

With that all in mind, I determined that the surprise and less pressure to get the items completed were not worth the button/buttonhole headache, and with this lesson learned, the next time I make something for the girls, there will be fittings during the process. Version 2

Upon receiving the tops, their mom says the girls like them and will wear them. I explained to their mom the button/floppy curve issue and she said it would not be a problem.

I don’t believe that the girls were nearly as excited about these tops as they were their fun vests or their Dr Who bags, but that is ok because I learned a lot from these tops both in the sewing process itself and in the process of sewing for others. 20150530_124000

And the next time I sew for the girls, I am getting them involved in the process.

No more surprises!

I want them to pick their own fabrics, colors and styles. I want to measure them so that I have the best fit, instead of using a year old measurement that their mom took (no offense to their mom), and I want fittings and alterations done during the sewing process.

I think I will learn even more sewing for them this way and they will have exactly what they want as well. Plus NO more guessing!

Until then, sew forth and bias tape on!

Being Biased – Part 2 – The Sewing of the Bias Tape

DSCN1308I gave the process of sewing of the crossed back summer tops a lot of thought before I made the first seam.

I had read the pattern instructions, but I wanted to sew the top together with fitting in mind. I wanted to sew the seams so that the minimal amount of unpicking would be necessary if I needed to alter the size of the tops for the girls later. So, my plan was to start with sewing on the bias tape before sewing the shoulder seams or the side seams. After the bias tape was sewn on, I would sew the bias tape together with the shoulder and side seams as one single seam. That way if I had to alter the shoulder seams or the sides seams of the top, I only had to unpick a little bit of bias tape to get to the seams. This was a great plan until I thought about how I wanted to sew the bias tape on.

DSCN1298In deciding how I wanted to sew the bias tape on, did I want to sew the tape to the right side of the fabric and then fold it to the wrong side and stitch in the ditch on the front so that no seams were showing? Or, did I want to sew the tape to the wrong side and fold it to the right side and then stitch the tape with a decorated thread or stitch?

Since I was already mixing colors by using the pink bias tape on the purple top and visa versa, I choose the second option for sewing the bias tape on. So, my final sewing plan went as follows: I would sew the bias tape to the wrong side of the fabric and would then fold the tape to the right side after sewing the bias tape together with the shoulder and side seams. I would then top stitch the tape with the opposite color thread, i.e. sew the purple bias tape on with pink thread and visa versa. Sounds like a solid plan, right?

Well, this did not work as planned.

DSCN1295Because of how I had sewed the bias tape on, when I folded it to the right side the bias tape was needed to be sewed together opposite of the shoulder and side seams. If I had sewn the bias tape the other way that I had thought about doing it and folded it to the wrong side, my seams would have worked. But, instead of my plan working, I got to unpick several inches of each piece of the bias tape so that I could sew the bias tape together, then I could sew the shoulder and side seams together and then sew the bias tape back in place on the wrong side. Finally, I could fold the bias tape to the front and do the top stitching. All these little seams were flustering and extremely time consuming to sew and lets face it, not a lot of fun to do! But, I finally got it done and I had completed the sewing of the first top.

DSCN1306I wanted to sew the second top with the bias tape folding the same way as the first so I returned to the pattern’s instructions. I started by sewing the shoulder and side seams together first and then I sewed the bias tape on the wrong side of the top. Next I folded the tape to the right side and then top stitched the tape on. This went much faster and easier than the sewing of the first top had with no little seams to deal with. An with that the second tops sewing was complete.

I had four opportunities to learn the best way to start and stop the bias tape. I tried several ways but the way that folded and stitched the best for me was to leave a small piece of bias tape unstitched where I started. When I reached the end of the seam for the bias tape, I folded the ending piece of bias tape back on itself. I then laid the starting unstitched piece on top of the folded ending piece and then sewed this in place. When I folded the bias tape over, the starting pieces folded into the folded ending piece to make a finished start and stop of the bias tape.

DSCN1313The idea of sewing the bias tape to the wrong side of the top and then folding the bias tape to the front and top stitching in a contrasting thread sounded great, but in reality, sewing the bias tape on the right side and folding it to the back and stitching in the ditch with a matching thread would have hid a lot of sewing sins.

The top stitching looks good for the most part, but anywhere were my seams were not exactly straight, the contrasting thread announces the wavy seam LOUDLY. Also the starting and stopping of the seams don’t look that good. This is especially true where I was learning how I wanted to start and stop the bias tape.

DSCN1299The sewing of the tops would have been a lot easier and cleaner if I had sewn the bias tape the other way, sewn to right side and then folded to the back. I also could have followed my fitting plan. But, I had sewn the bias tape the other way and many lessons were learned, so it made the whole experience a good thing. Plus, the tops were looking good with the contrasting colors and threads. So, with the tops sewn, it was time to add on the buttons and buttonholes.

Join me next time to see how they turned out once they were completed!

Until then, sew forth and bias tape on!

Being Biased – Part 1 -The Making of the Bias Tape

IMG_1621My coworker’s tween girls are using and enjoying their Dr Who bags and it does my heart good for someone to enjoy and use something that I have made.

So much so, that it was easy to find another pattern to sew for them next. This time I made them a summer crossed back top from some sugar skull fabric that they picked out. I found this crossed back top pattern on line for free. It looked like a fun summer shirt, easy enough to sew and the right size for the girls.

I gave the girls their choice of a couple of fabrics that I had in the stash and they both picked the sugar skull fabric. I did not have enough sugar skull fabric to made both shirts so I planned to piece the tops with some black fabric from the stash.

Then I thought about it being summer. DSCN1296These were summer tops made to be worn in the heat of the summer months, so how could I make them from black fabric? So I dug through the stash and I found some nice pink and purple that would match the sugar skull fabric.

I decided to make one top from the pink and one from the purple so the girls would not have to match. I know that teens are image concious that way. The pattern is only two pieces, a front and a back, cut twice. Based on the girls measurements, I cut the front and back 1/4 inch wider and 1 inch longer than the pattern called for. The pattern also called for 3 yards of 1/2 inch double folded bias tape. I

f I had been making the tops with the black fabric, I would have bought the needed bias tape, but since I was using the pink and purple fabric, I decided to make the bias tape. 61NeRAwqLEL._SY450_Then I had the idea of using the pink bias tape on the purple shirt and the purple bias tape on the pink shirt to give them some great contrast, so I would definitely be making the bias tape myself. Plus, it would give me the opportunity to make bias tape again, and as you know practice makes perfect and I don’t use bias tape all that often.

Now, I thought I had the process down for making bias tape from the last time I made it for another project, but I was incorrect. I had a lot to learn and relearn while making this bias tape. I started out by cutting 1 inch strips on the bias. When it came time to sew the bias strips together, I knew that they needed to be sewn at a 90 degree angle, but I kept sewing the strips together backwards, one seam up and then one seam down. After much trial and error, I figured out that I needed to sew one strip on top, then the next strip on bottom to keep all the seams all on one side. 71f-MxnZmTL._SY450_

After getting all the bias strips sewn together correctly, I started to iron and shape them. I used my 1/2 bias tape maker and was making some beautiful bias tape, when I realized that my bias tape was only single fold.

What? Darn! I needed double folded bias tape!

So I folded my beautiful 1/2 single fold bias tape in half and got 1/4 inch double folded bias tape, half the size of what I needed. Crap! I seriously thought about just using the 1/4 inch double fold bias tape that I had made but I decided against it and started all over again.

This time, I cut 2 inch strips on the bias, sewing them together correctly as I had learned to do earlier, and I prepared to iron again, but not until I purchased a one inch bias tape maker.

Looking on Amazon for bias tape makers, I found two types, Singer brand made completely from metal, and several third party brands made of metal with a plastic insert.

Which was better? DSCN1310

After reading many reviews and pondering the question, the husband rolled his eyes and ordered me both the Singer and another brand with the plastic inserts. After trying both styles of bias tape maker, I decided to use the Singer metal ones. Even though both worked fine, I just liked the Singer ones better. They seem to fold the fabric more evenly and were easier to push the fabric into the maker when starting out.

After a fair amount of ironing, I had 4 yards of 1/2 inch double folded bias tape in both pink and purple, ready to sew on. I made 4 yards of each color rather than 3 yards like the pattern called for because I had increased the size of the tops slightly from what the pattern called for.

Now it was time to sew the bias tape on to the tops.

Stay tuned for the construction of the crossed back summer tops in my next post!

Until then, sew forth and bias tape on!

The Making of the Doctor Who Reversible Sling Bag – Part 2 – The Construction

dscn1157dscn1149The construction of the Doctor Who reversible sling bag began with cutting out the pattern pieces from the fabric. I remembered to cut the length 1 inches longer and the strap 3 inches longer as I had previously decided to do as I cut the black bottom weight pieces and the Doctor Who Dalek fabric.

dscn1150dscn1139But as I cut out the striped fabric, the stripes started to play with my brain and I cut out one piece correctly, and three pieces incorrectly with 3 inches extra on the bottom and only 1 inch extra on the straps. When I realized my error, I thought about cutting the 3 pieces out again correctly but I hated to waste the fabric. I had purchased this fabric for another project and had cut the pieces for this bag conservatively as to leave as much fabric as possible for that other project. That lead me to decide to make my already cut out pieces work out some how instead of cutting out corrected pieces.

dscn1128dscn1126The sewing process started with the insert seams and the bottom seams. I matched the insert seams at the top of the bag because of the extra inches at the bottom of the stripes, then cut off the extra before sewing the bottom of the bag. Next was the seam that I called the pinch. This is the seam that squares the bag to give the bag a bottom. It is sewn by first pinching the corners of the bottom seam of the bag and then stitching across the pinch. The pinch was easy with the bottom weight fabric of the Dalek fabric side of the bag. I measured and sewed carefully and the pinch turn out great.

dscn1129dscn1130The striped fabric was not as easy. Because it is a thin lining fabric, it wanted to slip and slide as I measured and sewed the pinch but with patience, I finally got acceptable results. These pinch seams weren’t that hard so I stopped being as careful and learned very quickly that that was a bad move. My next pinches went terribly wrong when I did not carefully measure and sew them. I ended up unpicking and re-measuring and re-sewing all 4 of the pinches on the second bag to get nicer pinches. Lesson learned, take the time needed to do the job right the first time.

dscn1132dscn1141The next step was to sew the two parts of the Dalek/black bag and stripe/black together. With rights sides together, I sewed around the curves of the top of the bags. Each bag was then turned right side out through the strap. This was a bit of a challenge but with time and patience the bags were turned right side out.

Now it was time to fix my cutting error. The striped fabric was 4 inches too short on the strap, 2 inches on each side. I had several options for fixing this problem, like just sewing more fabric to the stripe fabric dscn1146but I wanted to make sure it was very secure at the shoulder. I finally opted to dscn1144make a patch from the black fabric to cover the missing stripe fabric. I cut a piece of the black fabric big enough to cover the missing piece with seam allowances. I folded over the edges and ironed them in place then applied some seam to seam to the edges. I then ironed the patch in place. I sewed the patches in place as I top stitched the edges of the bag. The patch worked great to solve my cutting error, and because the patches are at the shoulder, it looks like I meant to add the patch to the strap as reinforcement.

dscn1134dscn1136The final bags turned out great. I was concerned at first about the bag not having a closure as it gapped when I placed it my shoulder but when I added a book to the bag, the weight of the book closed the bag. I took the bags to my coworker the next day. I showed her that they were reversible and told her if her daughters wanted a closure on the bags to bring them back to me. Her daughters called me the next day to tell me how much they liked the bags and that they had used the bags for their books at school that day instead of their regular back packs. I was excited to hear that the bags were a success and that they liked them and that they used them. It did my sewing heart good.

dscn1135dscn1159These bags were great fun to make and as always I learned some new sewing lessons from making them.

After this project, I see more sling bags in my future. Maybe next time with pockets and closures with Snoopy or Mickey Mouse fabric or maybe even more Doctor Who fabric.

I also have some great Marvel Comics fabric that I was wondering what to do with and San Diego Comic Con is coming up shortly!

dscn1155Oh, this is going to be fun!dscn1154

Until next time, sew forth and Trust the Doctor on!

The French Box Top

DSCN0651Having successfully completes the box pleat skirt for the little girls dress that I recently made, I wanted to continue practicing by making more box pleats. With that, I picked this box pleated top as my next project. It only had one box pleat so it would be a fast sew, but I would still be practicing another box pleat. Because I felt comfortable with sewing the box pleat, I decided to finish the seams off with French seams. This top would then give me practice on two sewing techniques that I had already tried, but that I could still use some practice in making.

DSCN0661The pattern for this top was a free one that I found online. I had just enough ladybugs and green cotton scraps left over to make this top with. So I printed out the pattern, taped it together and cut it out. As I cut out the paper pattern, I noticed that the facing and the front pieces of the top did not match up. I knew that if I cut the pattern out based on the pattern pieces, I would have a mess with mismatched facings, and I would get flustered while sewing this together and not get good results. Knowing this, I discarded the facings pieces from the pattern and just used the top pieces to cut a facing instead.

Sewing the top started with the French seams to piece the ladybug fabric and green cotton fabrics together. The French seams came out great! They are clean and finished. Since the green cotton is heavier than the ladybug fabric, I sewed the French seams to the green cotton rather than the other way around.

DSCN0212Next came sewing the box pleat. This time, I sewed the seam down the back of the pleat, flattened the pleat and then stitched across the top of the pleat to secure it. I did not top stitch the box onto the pleat like I did for the skirt. I wanted the pleat to open up if needed on this top.

DSCN0250Next up, I sewed the shoulder seams and then it was time to apply the facings. After reading the pattern guide for how to sew the facings, I decided the pattern guides instructions would not work for me. So I threw the pattern guide away along with the facings pieces from the pattern. I decided to sew the facing to the top as I had learned from making the bodices of the dresses that I had made before. I sewed around the neck and down the back, and then around the arms. Next, I stitched the side seams together. Because the side seams were exposed after the facing ended, I did a French seam for the side seams. But, as I tried to sew the French side seam down, I ran into trouble. The French side seam on top of the French piecing seams was just too thick. I broke 3 needles before I gave up and decided not to stitch down the French side seams. I don’t believe that having the side seams not stitched down will affect the wearing of this top. Next, I hemmed the facing.

DSCN0653Once again because the facing did not extend to the bottom of the top and because I had abandoned the pattern guides instructions, half of the back seams were left exposed. So to finish off the edge, I folded the edge over on each side of the back. This gave me four layers of fabric at the top where the facings are and two layers down below the facings. I did not apply any interfacing to the button placket because of the 4 layers, but as I sewed the buttonholes and buttons to the top, I wished that I had added some interfacing below the facing where the top was only two layers thick, especially on the thinner ladybug fabric. The buttons and buttonholes came out fine even without the interfacing. There was no way my buttonholer would sew over the French seams, so I had to carefully measure and place the buttonholes so that I would not have an issue making them or sewing on the buttons. The last steps were to hem the bottom of the top and topstitch around the arms and neck.

DSCN0655I am pleased with the end results of this top. It was great to practice with the box pleats and French seams, but what I am most proud of is that I was able to identify the pitfalls of the pattern and the construction early on in the project. And that I was able to use my sewing knowledge to circumvent them instead of suffering through them, and to find a better way for me to complete the project. Usually if there is a hard way to do something, that’s my way of doing it, but this time that was not true. I hope I can keep up this forethought momentum as I move on to my next project.

Until next time, sew forth and box top on.

Either Side

DSCN0636I always find a lot of fun free amigurumi patterns when I look around on the internet. This time though I found a free sewing pattern for a little girl’s reversible wrap top. This top looked like a fun sewing project, plus I knew just the fabric that I wanted to use for it. And with that, this top became my next sewing project. I would also be expanding my sewing skills while making it which was a plus too. This would be the first reversible garment I had ever sewn.

I had purchased this fabric at a thrift store many years ago, and it was promptly tucked into the stash for just the right future project. Now, many years later, the right project had finally emerged, but is the pattern on the fabric too dated to use? Are these funky cats too far out of style to make this into a top? I decided that I really like the funky cats and that I still want to make this top from this fabric. I had planned to make the ties for the top from the funky cat fabric too, but I found some small white bias tape in the closest and decided to use it instead.

DSCN0632With the fabric washed, dried and ironed, it was time to get the pattern ready. After reading the instructions for the pattern, printing out the pattern pieces, taping it together, and cutting it out, I decided that since I had plenty of fabric to work with that I would make the largest size of the pattern in a size 4/5. The pattern was easy to cut out and I was soon ready to sew.

The sewing process for this top was fun and easy. The most difficult part was sewing the bias tape together. It was difficult to sew a straight seam so close to the edge of such a small piece of fabric and not have it bunch up under the needle or sew off the edge. After struggling through the stitching of the 4 ties, I thought about using seam to seam adhesive instead. So the next time I will not stitch the bias tape together, but instead I will fuse it closed with some seam to seam adhesive and save me a lot of time and trouble.

I did not use the floss method to gather the flutter sleeve because they were so small. I just stitched a row of long stitches and pulled the threads to make the gathers. I was careful to pull the gathers the same amount on each sleeve, making sure to keep the sleeves the same length.

DSCN0641Sewing the ties on to the top took some thought. The ties on the front pieces were easy, one tie on each front piece. On the side seams though, I had to make sure that I had one tie on the pink side and one tie on the white side.

The hem also required some thought to finish. At first, I thought I would hem this top as a big circle. Then I realized that this would leave exposed seams inside the top. Since this was a reversible top, I had not finished any of the seams, knowing that they would just be tucked inside the top. With this in mind, I stitched the white and pink fabric together at the hem to seal the unfinished seams inside. Sewing the hem this way was not hard. I just had to be careful to keep the pieces of fabric folded evenly as I hemmed. I finished off with some topstitching around the edges to match the hem and reinforce the ties.

DSCN0639The top turned out just too cute. The funky cats are fun, and it is great that the little girl wearing this can pick if she wants to wear pink or white that day. I do have some questions about the wearing of this top. Does the little girl wearing this top find the inside ties uncomfortable? Are two ties enough to keep this top on while playing? Do the ties stay tied through out the day or is the little girl constantly needing her top tied back on? Do two fronts make the top hot and bulky to wear? Man, do I miss the little neighbor girl. I could have given her this top and got some feedback from her mom on these wear issues. I like this pattern and it is well written. The top was a fun project and I would like to make more of these reversible tops in the future, but I hesitate to do so until I know more about how well it wears.

Until next time, sew forth and reverse on!