Tag Archive | french

Creative Determining – Part 2

DSCN3986DSCN3987To begin the the sewing process of the Snoopy peplum top I started with the peplum first.

Since I was not going to line the peplum, I wanted to hide all the seams as much as possible, so I sewed French seams to piece the peplum together.

 

This was not difficult, just time consuming with a lot of ironing in between seams. I did a simple 1/2 inch hem at the bottom of the peplum to complete it.

Sewing the bodice was next. I decided at the last minute to add the yellow sleeves to the top. I like the yellow sleeves but as I snipped the curve of one of the sleeves I caught the lining and so I had to do a little mending. Luckily, the mended spot is on the inside of the top and cannot be seen from the outside. It should not affect the wearing of the top.

DSCN3998DSCN3989After gathering the peplum, I sewed the peplum to the bodice, making sure to line up the seams as much as possible. I serged this seam to finish it, rather than covering the seam with the lining and doing the stitch in the ditch seam.

The serged seam looks fine and saved me the headache of doing the stitch in the ditch seam.

 

I probably could have used the practice sewing the stitch in the ditch seam on this top, but sometimes just sewing the easy and simple way is fun too. And it’s much less stressful too!

With that, the little girl’s peplum top from the leftover Snoopy fabric scraps was completed!

DSCN3995DSCN3994The top is just adorable and the multiple seams in the peplum are really not that noticeable with the gathers.

This was a fun sew.

It is always fun to make something from nothing and to let the creative side flow to make it work.

Unfortunately, now that I have used up all the Snoopy scraps, I have at least a hundred projects that have raced through my mind that I could have made using the scraps.

Having said that though, I am not disappointed at all that I used these Snoopy scraps to make this top and at least they were put to good use!

Until then, sew forth and determine on!

Creative Determining – Part 1

DSCN3986There was no way that I was going to throw away any of the precious Snoopy fabric scraps left over from my new Snoopy shirt. The scraps really were not large enough to make anything with, not even for a child, but I just could not bear to throw them away. So, what to do with these scraps beside stack them on the edge of the cutting table and stare at them?

Recently, I have seen several little girls peplum tops that are just adorable and I have wanted to make one. So, looking at the Snoopy fabric scraps, I decided to see if I could squeeze a little girl’s peplum top out of the pieces. The size of top I would make would be determined by the dimensions of the scraps.

DSCN3813I didn’t really have a pattern so I turned to the internet for ideas. The first style of peplum top I found had a circular peplum. This was out of the question. The scraps I had to work with were absolutely too small to cut a circular peplum from. The second style I found was a gathered peplum. Hmmm. I might be able to make this work with the scraps.

DSCN3985Now, how long should the peplum be versus the length of the bodice? I saw a variety of bodice and peplum lengths from long bodices with short peplums to short bodices with long peplums and many hi/low peplums in between while I was searching. Once again, I would need to let the dimensions of the scraps determine the length of the peplum and the bodice and the scraps would also determine how full the gathered peplum would be.

DSCN3999Still not having a pattern, I pulled out my favorite little girls dress pattern as a guide. Based on the size of the largest scrap, I determined that I could get a size 4 bodice front and back from the scraps as well as have a few pieces left over for the peplum. I quickly picked some yellow cotton from the stash that matched Woodstock for the lining of the bodice.

To make the peplum, I squared the remaining scraps of Snoopy fabric I had and found that I had two pieces approximately 6 inches tall by 12 inches wide and 4 pieces that were 6 inches tall by 6 inches wide. (Actually, one of the 6 by 6 inches pieces was only DSCN39965 inches wide, but I could work with that.) With a lot of seam work, I determined that I could make these scraps work out for the peplum. I would sew the two 12 wide pieces together for the front of the peplum and sew the 6 inches pieces together for the back or the peplum.

I would not be matching any of the designs in the Snoopy fabric. There was certainly not enough scraps for that, but luckily with a gathered peplum, the non-matching designs as well as the many seams that I would be sewing would just be gathered in.

Excitement for this project grew, as I saw my almost useless scraps become a little girls peplum top!

Stay tuned for the sewing of the little girl’s Snoopy peplum top.

Until then, sew forth and scrap on!

New Sewing Tools – Part 2 – In The Pink

DSCN4050The sewing process for the sweater started with the plan to use my second new sewing tool, a new pair of pinking sheers. When reading about sewing fleece, one of the suggestions for finishing the seams of fleece was to just pink the seam allowances with a pair of pinking shears. I used to have a pair of pinking shears many years ago. I loaned them to a friend and I never saw them again. I haven’t really missed owning a pair until recently though, so I decided to reinvest in a new pair of pinking sheers.

DSCN3982When I looked into buying the pinking sheers, I found that I could spend a lot of money for nice pair or a much smaller amount of money for just a pair of the sheers that people had reviewed and said worked well for them. As you and I know, a good pair of scissors is a valuable sewing tool. So, when it comes to buying sewing scissors, I believe that you should spend the extra money for a nice pair of sew scissors. But is that true when it come to pinking sheers I wondered? I decided to go against the grain and buy the less expensive pinking shears for now. Later, if I found that I used the pinking sheer all the time, and I needed a nicer pair, I could then invest the money and buy the more expensive pair.

I sewed up the seams of the sweater, ironed the seams open and pinked the seam allowances. This was easy to do, but it was time consuming to line up the pinked edges. When the seams were done, the pinked seam allowances looked good and pinking was a fine way to finish the edges, but I still think that I like the look of a serged edge better. A serged edge to me is just a cleaner look.

DSCN3721In the end I was happy that I did not spend a lot on money on the more expensive pinking sheers. I just don’t think I will be pinking all that often, and the less expensive pair will be fine for me for how often I expect to use them. Although, if I was going to be using pinking sheers on the majority of my sewing projects, I would definitely invest in the nicer, more expensive pair of the pinking sheers since I know how much better a project goes with good scissors.

Sewing the bias tape on was next. I learned quickly not to let the fleece stretch too much as I sewed the bias tape on. My plan was to sew the bias tape on, fold the edges over and to stitch in the ditch on the front, catching the bias tape on the back. This did not work for me though. I remembered to not trim the bulk from the seam allowance of the bias tape but to leave the bulk to even out the fabric from the heavy fleece to the thin bias tape. I did trim a little of the bulk off the edge to smooth the edges, but not much.

DSCN3974The problem with leaving the bulk is that after going around the bulk with the bias tape, the bias tape was too short on the back side to be caught by the stitch in the ditch seam from the front side. Rather than arguing with the stitch in the ditch seam, I decided to sew on the edge of the bias tape on the front side. Now, there was no problem catching the bias tape on the back side. I was using nice matching thread so the sewing on the edge looks good, probably better than the stitched in the ditch seam would have looked.

DSCN3723The last step was to apply the velcro closures. As I cut four one inches squares of velcro to sew to the sweater, the husband shock his head no. He said he thought that buttons would look better. Since this sweater is not for an infant, there is no worry about a chocking hazard with buttons, so I decided that using buttons instead of velcro would be fine. I asked the husband what he thought about sewing the velcro on as the closure and the buttons on top of the velcro for decoration but he thought that the buttons as the closures was better. He did not like idea of the Velcro closures for a three year old.

DSCN4045Because the sweater is unlined with no facings or interfacing, I put a piece of tearaway stabilizer under the fleece to help keep the fleece from stretching as I sewed the buttonholes. This worked out great! The stabilizer held the fleece steady as the buttonholes sewed and gave the buttonholes themselves more durability. The extra stabilizer was torn away so you won’t even know I used it nor will it ruin the look of the buttonholes inside the sweater.

DSCN3976Soon the buttonholes and buttons were sewn and the sweater was all done!

I think that this sweater is just adorable! I had a lot of fun making it and I learned a few new sewing things and I got to use my new sewing tools as well. I will keep this sweater in mind for the next time I want to make a fun and simpler sewing project.

Until then, sew forth and pink on!

New Sewing Tools – Part 1 – Cutting The Curve

DSCN4045I love to go to craft shows, but I rarely buy anything. I am one of those people that professional crafters hate. I walk around and see what they have made, borrow their ideas, then I run home and make one for myself. That is what happened this time, with my latest fleece jacket/sweater project. The lady at the craft show had made a simple infant unlined fleece sweater, finished with bias tape edges and velcro closures. The sweaters were just adorable, simple and cute, and since I was in the mood for a light project, I decided to make one of these sweaters myself. Plus, I could practice making and sewing bias tape and use two new sewing tools that I had recently acquired.

I knew that I wanted to use this bear fleece that had been in the stash for many years. In fact, it was one of the first pieces of fleece that I ever purchased. Since it was never picked to be used for a blanket, it was time for it to be a sweater instead. I picked a brown cotton fabric for the bias tape, but when the husband saw the bear fleece he said to change to a red bias tape instead. It was no problem to pull some red cotton out of the stash to make the red bias tape with.

DSCN4052I cut 2 inch strips on the bias of the red cotton fabric to make 1 inch bias tape. The cutting and sewing of the strips went smoothly. I am getting better at this process each time I make bias tape. After a lot of ironing, I had a pile of red 1 inch bias tape made. I did not know exactly how much of the red bias tape I needed, so I just made a fair amount since I knew I could make more if needed. If I had extra, I would just save it for another project.

Now it was time to cut out the sweater. I was on my way to the pattern stash to find an infant jacket pattern to use when I spied my Simplicity 8902 pattern laying by the cutting table. Why not just use this pattern? It is a tried and true pattern for me, plus the size 3 was already traced and ready to use. I had envisioned this project for an infant but there was no reason that a 3 year could not wear a teddy bear fleece sweater as well so that is what I went with.

DSCN4046As I cut out the pattern pieces I added an extra inch to the fronts for the velcro overlap and I got the chance to use my first new sewing tool. I wanted to curve the tops and bottoms of the overlaps so I used my new french curve ruler I had picked up on clearance recently. Usually, I would have looked for a plate or bowl to cut the curves, but it was nice to use the curved ruler with the markings to make more accurate, even curves with. Plus, the rotary cutter cut much smoother around the edge of the ruler than it does around the edge of a bowl or plate. It did not take long to cut out the pieces for this sweater and to begin the sewing process.

Stay tuned next time for the sewing of the sweater.

Until then, sew forth and curve on!

The French Box Top

DSCN0651Having successfully completes the box pleat skirt for the little girls dress that I recently made, I wanted to continue practicing by making more box pleats. With that, I picked this box pleated top as my next project. It only had one box pleat so it would be a fast sew, but I would still be practicing another box pleat. Because I felt comfortable with sewing the box pleat, I decided to finish the seams off with French seams. This top would then give me practice on two sewing techniques that I had already tried, but that I could still use some practice in making.

DSCN0661The pattern for this top was a free one that I found online. I had just enough ladybugs and green cotton scraps left over to make this top with. So I printed out the pattern, taped it together and cut it out. As I cut out the paper pattern, I noticed that the facing and the front pieces of the top did not match up. I knew that if I cut the pattern out based on the pattern pieces, I would have a mess with mismatched facings, and I would get flustered while sewing this together and not get good results. Knowing this, I discarded the facings pieces from the pattern and just used the top pieces to cut a facing instead.

Sewing the top started with the French seams to piece the ladybug fabric and green cotton fabrics together. The French seams came out great! They are clean and finished. Since the green cotton is heavier than the ladybug fabric, I sewed the French seams to the green cotton rather than the other way around.

DSCN0212Next came sewing the box pleat. This time, I sewed the seam down the back of the pleat, flattened the pleat and then stitched across the top of the pleat to secure it. I did not top stitch the box onto the pleat like I did for the skirt. I wanted the pleat to open up if needed on this top.

DSCN0250Next up, I sewed the shoulder seams and then it was time to apply the facings. After reading the pattern guide for how to sew the facings, I decided the pattern guides instructions would not work for me. So I threw the pattern guide away along with the facings pieces from the pattern. I decided to sew the facing to the top as I had learned from making the bodices of the dresses that I had made before. I sewed around the neck and down the back, and then around the arms. Next, I stitched the side seams together. Because the side seams were exposed after the facing ended, I did a French seam for the side seams. But, as I tried to sew the French side seam down, I ran into trouble. The French side seam on top of the French piecing seams was just too thick. I broke 3 needles before I gave up and decided not to stitch down the French side seams. I don’t believe that having the side seams not stitched down will affect the wearing of this top. Next, I hemmed the facing.

DSCN0653Once again because the facing did not extend to the bottom of the top and because I had abandoned the pattern guides instructions, half of the back seams were left exposed. So to finish off the edge, I folded the edge over on each side of the back. This gave me four layers of fabric at the top where the facings are and two layers down below the facings. I did not apply any interfacing to the button placket because of the 4 layers, but as I sewed the buttonholes and buttons to the top, I wished that I had added some interfacing below the facing where the top was only two layers thick, especially on the thinner ladybug fabric. The buttons and buttonholes came out fine even without the interfacing. There was no way my buttonholer would sew over the French seams, so I had to carefully measure and place the buttonholes so that I would not have an issue making them or sewing on the buttons. The last steps were to hem the bottom of the top and topstitch around the arms and neck.

DSCN0655I am pleased with the end results of this top. It was great to practice with the box pleats and French seams, but what I am most proud of is that I was able to identify the pitfalls of the pattern and the construction early on in the project. And that I was able to use my sewing knowledge to circumvent them instead of suffering through them, and to find a better way for me to complete the project. Usually if there is a hard way to do something, that’s my way of doing it, but this time that was not true. I hope I can keep up this forethought momentum as I move on to my next project.

Until next time, sew forth and box top on.

What to Wear to America’s Birthday Party

DSCN0103I found this fun sun top pattern on the internet. It looked just right for summer outings, so I decided that I wanted to make one for each for my co-workers tween daughters. This top is made as a front and back square, sewn into a tube. Elastic is sewn to the top to gather the tube to fit the body, and then shoulder ties are added to help keep the top on. Simple enough. The only measurement needed to make this top is an accurate chest measurement. I reached for this Stars and Stripes cotton print that has been hiding in the stash for as long as I can remember. And I hoped that this would give the girls something fun to wear on the 4th of July.

DSCN0099I cut out 4 squares of fabric, 23 inches by 28 inches, for the two tops and 8 strips, 4 for each top, for the shoulder ties. The first step was to sew the side seams. Normally, I would have just serged the side seams to finish them up but the pattern called for french seams. I have read about french seams and seen videos for sewing them but I had never done a french seam. And I figured that I might as well learn something new while making these tops, so I sewed 4 french seams  The french seams were very easy to make and leave a beautiful clean finish to the seams. In fact, you hardly notice there are side seams with the french seam technique.

Next came the shoulder ties. These were not difficult to make, just time consuming. There was a lot of ironing to make these ties. I folded the strips I had cut like bias tape by folding the edges to the middle and then folding the strip in half, then tucking the raw edges into the fold.  Next I edge stitched down each tie. I learned a lot about folding the edges, ironing the edges and edge stitching by the time I had made 8 ties.

DSCN0102I next stitched a 1 inch hem at one end of the tube and a 1.5 inch hem on the other. I added the ties to the larger hem as I stitched it and I placed the ties 8 inches from the side seam. I made a tab and placed it under the hem at the center back as a tag, and also to tell me which top was for which girls since their measurements are just a little bit different.  I also left an opening for the elastic in this hem. I then stitched down the middle of the larger hem to make a casing for the elastic. This left a nice ruffle at the top. This ruffle is very cute and adds a nice touch at the top of the elastic. I cut the elastic to the chest measurements that the girl’s mom had given me plus one inch. I did not want the elastic so tight so that it cut into their chest when wearing the top. I also wanted the elastic just big enough to the make the gathers and hold the tube to their body. Lastly I pulled the elastic and then finished it off to complete the top.

DSCN0096Upon completing the tops, I put one of the tops on a hanger to take pictures before giving the tops to the girls. It look terrible on the hanger. The ties looked too close to the center front and the tube looked like just that, a tube. I was very disappointed. I could only hope the tops would look better on the girls than they did on the hanger. Luckily, they did. The girls looked very cute in their summer tops, and they seemed to like them. The tops seemed a little long and I told the girls that I would shorten them, but they both said they liked the length. The smaller girl mentioned that her elastic seemed tight. I told her that was an easy fix and had her try on her sister’s top. She said that the larger size was a better fit. This really was an easy fix. I just unpicked where I had closed the elastic, removed the smaller piece of elastic, pulled in a longer piece and stitched it back up again. At work, their mom said the fit was great and they were already wearing their tops before the 4th of July. I was excited to hear that.  I hope they will wear and enjoy their tops all summer long.

Until next time…

Happy American Independence Day and Sew forth and Celebrate On!