Tag Archive | girl

Creative Determining – Part 2

DSCN3986DSCN3987To begin the the sewing process of the Snoopy peplum top I started with the peplum first.

Since I was not going to line the peplum, I wanted to hide all the seams as much as possible, so I sewed French seams to piece the peplum together.

 

This was not difficult, just time consuming with a lot of ironing in between seams. I did a simple 1/2 inch hem at the bottom of the peplum to complete it.

Sewing the bodice was next. I decided at the last minute to add the yellow sleeves to the top. I like the yellow sleeves but as I snipped the curve of one of the sleeves I caught the lining and so I had to do a little mending. Luckily, the mended spot is on the inside of the top and cannot be seen from the outside. It should not affect the wearing of the top.

DSCN3998DSCN3989After gathering the peplum, I sewed the peplum to the bodice, making sure to line up the seams as much as possible. I serged this seam to finish it, rather than covering the seam with the lining and doing the stitch in the ditch seam.

The serged seam looks fine and saved me the headache of doing the stitch in the ditch seam.

 

I probably could have used the practice sewing the stitch in the ditch seam on this top, but sometimes just sewing the easy and simple way is fun too. And it’s much less stressful too!

With that, the little girl’s peplum top from the leftover Snoopy fabric scraps was completed!

DSCN3995DSCN3994The top is just adorable and the multiple seams in the peplum are really not that noticeable with the gathers.

This was a fun sew.

It is always fun to make something from nothing and to let the creative side flow to make it work.

Unfortunately, now that I have used up all the Snoopy scraps, I have at least a hundred projects that have raced through my mind that I could have made using the scraps.

Having said that though, I am not disappointed at all that I used these Snoopy scraps to make this top and at least they were put to good use!

Until then, sew forth and determine on!

Advertisements

Creative Determining – Part 1

DSCN3986There was no way that I was going to throw away any of the precious Snoopy fabric scraps left over from my new Snoopy shirt. The scraps really were not large enough to make anything with, not even for a child, but I just could not bear to throw them away. So, what to do with these scraps beside stack them on the edge of the cutting table and stare at them?

Recently, I have seen several little girls peplum tops that are just adorable and I have wanted to make one. So, looking at the Snoopy fabric scraps, I decided to see if I could squeeze a little girl’s peplum top out of the pieces. The size of top I would make would be determined by the dimensions of the scraps.

DSCN3813I didn’t really have a pattern so I turned to the internet for ideas. The first style of peplum top I found had a circular peplum. This was out of the question. The scraps I had to work with were absolutely too small to cut a circular peplum from. The second style I found was a gathered peplum. Hmmm. I might be able to make this work with the scraps.

DSCN3985Now, how long should the peplum be versus the length of the bodice? I saw a variety of bodice and peplum lengths from long bodices with short peplums to short bodices with long peplums and many hi/low peplums in between while I was searching. Once again, I would need to let the dimensions of the scraps determine the length of the peplum and the bodice and the scraps would also determine how full the gathered peplum would be.

DSCN3999Still not having a pattern, I pulled out my favorite little girls dress pattern as a guide. Based on the size of the largest scrap, I determined that I could get a size 4 bodice front and back from the scraps as well as have a few pieces left over for the peplum. I quickly picked some yellow cotton from the stash that matched Woodstock for the lining of the bodice.

To make the peplum, I squared the remaining scraps of Snoopy fabric I had and found that I had two pieces approximately 6 inches tall by 12 inches wide and 4 pieces that were 6 inches tall by 6 inches wide. (Actually, one of the 6 by 6 inches pieces was only DSCN39965 inches wide, but I could work with that.) With a lot of seam work, I determined that I could make these scraps work out for the peplum. I would sew the two 12 wide pieces together for the front of the peplum and sew the 6 inches pieces together for the back or the peplum.

I would not be matching any of the designs in the Snoopy fabric. There was certainly not enough scraps for that, but luckily with a gathered peplum, the non-matching designs as well as the many seams that I would be sewing would just be gathered in.

Excitement for this project grew, as I saw my almost useless scraps become a little girls peplum top!

Stay tuned for the sewing of the little girl’s Snoopy peplum top.

Until then, sew forth and scrap on!

I’ll Never Fall In Love Again!

Screen-Shot-2013-11-05-at-9.01.40-AMYou can see it from across the fabric store and there is a whole wall displaying it…

You’re drawn to it and it is so soft, fuzzy and warm, and some of the cutest designs ever are printed on it…

You MUST buy some and, as a general rule, its on sale…

Of course, I am talking about polar fleece and everybody just loves this fabric! Everyone it seems except me. Dare I say it out loud, I may not be in love with fleece or enjoy working with it as much as everyone else on the planet seems to be.

And here is why.

I, like everyone else, love the idea or the concept of fleece fabric. And who wouldn’t? It’s soft, warm, fuzzy fabric with no fraying, no shrinking, it looks good on both sides, it has some stretch but not too much stretch, and all the other fun features that fleece offers a sewer. What isn’t there to love? But, after sewing the last girl’s fleece jacket and starting my next sewing project with fleece, I’m not convinced that it really is all that easy and wonderful of a fabric to work with.

When I first started purchasing fleece fabrics, I planned to only make blankets with it, and who cared if the blankets were a little off grain and the print wasn’t perpendicular, or that it can’t be easily ironed or caused several headaches when sewn with the serger due to the amount of bulk.

DSCN2567For the blankets I was making, I did not give these concepts a second thought, so I was in love with fleece just like everyone else, and I bought any and all I could get to hide in the stash for future projects I had dreamt up. When I decided that I wanted to expand my skill set a little bit and make more than blankets from the fleece, I was at a point in my sewing skills where I did not worry about grain line, or matching designs, or ironing seams. So for the first couple of fleece projects that I made, I just cut it out and sewed it up, and I was still in love with fleece.

DSCN2575 (1)As my sewing skills have advanced over time, I am now far more concerned with thing like grain lines, matching the designs, and ironing the seams. So, when it was time to make the latest girl’s fleece jacket, these things were foremost on my mind. As I cut out the pattern and the froggy’s and rainbows weren’t straight, making it difficult to cut on the grain line and match the designs up, working with fleece became more than just cut and sew.

DSCN2572Looking at the piece of fleece, there were spots where I had to move over 21 inches from the edge of the fabric before I could find a good spot to cut. This was crazy! I decided that the froggy piece of fleece was just flawed until I started my next fleece project. Although not as much, I had to move 9 inches from the edge to get the footballs and helmets to line up.

Does all fleece suffer from this problem?

DSCN2563If it does, I’m going to have to watch WAY more closely when I buy fleece for pieces that I only have to move over 9 inches rather than 21 inches, or hopefully I can find some fleece that I will only lose a couple of inches on the edge. Plus, I’m going to have to buy extra fleece to accommodate for the lost fabric. I wanted to make my latest project a size large but had to switch to a size medium when I lost the 9 inches along the edge.

DSCN2566I turned to the Internet to see if I was alone in my wavering love of fleece, and from what I was reading, I was alone, everyone else seems to love fleece, but I did find several article titled, “How to sew fleece.” So, maybe you just have to learn the skill of sewing with fleece, just like learning to sew knits, furs, silks, actually any and all other types of fabrics. Maybe after learning some lessons about sewing with fleece, I will then be completely in love with fleece like so many others are.

Well I ldid learn a lot from the articles that I read on how to sew fleece, and I am excited to try out some of the things that I learned.

Luckily, I have my next sewing project involving fleece all cut out and ready to sew, so stay tuned to see how it turned out!

Until next time, sew forth and hopefully fall in love again.

Girl’s Fleece Jacket (Done Backwards) – Part 2

DSCN2088When I started this jacket, I decided to go ahead add the optional cuffs to the sleeves.

The cuffs looked so cute on the jacket on the pattern envelope, that I wanted this jacket to have the cuffs. But when it came time to sew the cuffs on, they were not turning out very well. They were just too bulky. The cuffs are made from two pieces of fleece. The first piece is sewn to the sleeve, then the next piece is sewn to the first piece and then folded over to make the cuff. I cut out the cuffs, sewed the cuffs to the sleeves and then removed the cuffs. In my opinion, this was a bad design for a fleece cuff due to so many seams in the cuffs and the bulkiness these seams caused. There are four layers of fleece in the top seam of the cuff, and that is just too many layers of fleece.

DSCN2084If I wanted to keep the cuffs, I had to come with a solution, so I gave it some thought and came up with some ideas.

First, the sleeves could be cut longer to make the cuffs. This would eliminating the bulky seams, but I had not cut my sleeves longer so this solution was out for this particular jacket. Another solution would be to use a thin lining fabric as part of the DSCN2086cuff, but I did not have it in me to dig through the stash to find a matching fabric. My third solution was to skip the cuffs, and make more bias tape. I would finish the edges of the sleeves with yellow bias tape to match the pockets. (My first thought was to use the bias tape to finish the edge of the cuffs, but eliminating only one of the layers in the bulky cuff was not enough.) So, I choose this as my plan. This jacket would not have cuffs, and I would finish the sleeves edges with the yellow bias tape.

Thinking back, I could have had cuffs on this jacket by combining the solutions. I could have used a lining fabric and the bias tape to make the cuffs and eliminate the bulk. Hmmm. Maybe I will try that on the next jacket.

DSCN3414By using the bias tape on the sleeves, I did not have to worry about a hem or the fact I had not cut the sleeves longer to accommodate a hem. I applied the bias tape to the edges of the sleeves, trimmed the seams and turned the bias tape to finish the seams. I noticed that the thin bias tape looked weak at the bottom of the heavy sleeves. The way I got rid of this weak look was to not trim the seam inside the bias tape so much, which was different from any other time I have applied bias tape. Previously, when I applied bias tape, I wanted the seam allowance trimmed out before folding the tape over. If the seam allowance was left inside the bias tape this time, the look was much fuller and it looked better.

DSCN3418It was now decision time. Which way did I want the jacket to cross, left over right or right over left? After a lot of thought and debating, I decided to cross the fronts as if it were a boy’s jacket, the left front on top of the right front. This will probably drive the little girl that wears this jacket nuts as she tries to button the jacket backwards, but the half froggy’s that I got from folding the jacket the other way just didn’t look good. Hopefully whoever wears this jacket won’t mind the backwards buttoning buttons if it is a girl.

I was dreading making the buttonholes on this jacket. I was not sure how my sewing machine would handle sewing buttonholes on fleece. Sometimes, even with thin non-stretch fabric, my sewing machine has a mind of its own when it comes to making buttonholes and sews whatever it wants to. To help combat this problem, I made horizontal buttonholes, and held my breath as the buttonholes were sewn, but my sewing machine did great and the buttonholes turned out just fine.

DSCN3413If I had known then, at the beginning of the sewing of this jacket, what I know now, nearing the end of the sewing of the jacket, I would have added piping to the peter pan collar to coordinate with the finished design of jacket. It would have been really cute to have had the bright yellow piping around the collar to match the piping on the pockets and the bias tape on the sleeve. This is definitely something I will keep in mind for the next jacket.

DSCN3416With the sewing on of the last button, the jacket was finally done!

The making of this jacket was a learning experience from the beginning to the end, from the cutting of the fleece, to the sewing of a back facing, to the piping curved pockets to the designing of the fleece cuffs. There were many lessons learned on this fleece jacket.

All in all, I think the jacket is very cute and I hope some little girl will be willing to wear it and will enjoy it!

Until next time, sew forth and fleece on!

Girl’s Fleece Jacket (Done Backwards) – Part 1

DSCN3413Over the years, I have accumulated a massive amount of polar fleece in the stash. At first, these fleeces were only purchased with blankets in mind, but over time, my ideas for fleece fabric has expanded. So, when I saw this pattern, McCalls M4981, especially designed to be made from fleece, I knew what I wanted to sew next.

IMG_0002 (2)M4961 is a pattern for a girl’s unlined fleece jacket with a peter pan collar, patch pockets and buttons closures. I was excited to get started, but I quickly learned that this project was not going to be an easy sew or a fast sew.

To start, I selected a piece of fleece from the stash. I chose this cute girl’s design of froggy’s, bees and rainbows on a brown background. I did not have to launder the fabric before I got started since their was no preshrinking needed with this fleece. I traced the pattern, size 6, and got started with the cutting process.

DSCN2575Cutting out this jacket was not an easy or quick task. The print on this fleece was so far off grain that it was almost impossible to cut the pieces so the froggy’s and rainbows were standing up straight. I pulled the fabric and repositioned the pattern pieces until I finally got the pieces cut out. When I finally finished the cutting process, I realized I had lined up the right and left front backwards from each other.

DSCN2572When I folded the right front over the left front for a girl, I got a nice froggy edge on the right side and half of a froggy edge on the left side, but if I folded the front as you would for a boy, left front on top of the right front, then I had a nice froggy front. So, should I have a poor looking front with half froggy’s and cross the jacket for a girl or have a nice looking front and cross the jacket for a boy? That was the question. This question did not have to be answered right away so I decided to move on.

DSCN3411I did add some thin interfacing to the facings and the collar. The husband thought I was crazy for adding more bulk to the fleece, but I explained to him that was why I was using such thin interfacing. I just wanted something to stabilize the fleece at those spots and keep it from stretching while sewing, particularly when it came time for buttons and buttonholes.

DSCN2074To start the sewing process, I did not read the pattern guide at all. Looking at the pattern pieces, the sewing of this jacket seemed pretty straight forward, So, I just got started. Who needs directions anyway? Am I right? I sewed and pressed the collar, serged the facings edges, folded them over and sewed the facings to the collar. Normally, my next step would be to sew a piece of twill tape to the collars inside edge to finish it and then tacked the facings to the shoulder seams. This pattern has a back facing as well though, and I stopped for a moment as I pondered how I was supposed to sew it on. I then turned to the pattern guide and read that sewing the back facing to the side facings should have been the first step before adding the collar.

Too late now!

DSCN3410I was certainly not unpicking all my sewing that I had done up to this point. My first instinct was to grab my twill tape and just throw away the back facing but then I came up with plan to attach the back facing. After some tedious sewing, I got the back facing sewn on, only to find out that I had sewn it on backwards. The wrong side of the fleece was facing out. Augh! There was no way I was unpicked the back facing just to flip it over. It would just remain backwards. Sometimes, just when you think you know it all, and you certainly know better than some pattern maker and you get ahead of yourself, you find out too late just how wrong you are…

DSCN2080When it came time to sew the pockets, I debated about how to get nice smooth curved pockets since the use of the iron was of limited use with the fleece. I had read about using piping to help curve the pockets so I decided to give it a try. I cut bias strips from yellow cotton scraps and made the piping for the pockets. When it came to sewing the piping to the pocket, I was having trouble starting the bias tape in the fold of the pocket because of the bulk of the fleece. I turned to some liquid stitch for help. I folded the yellow fabric over the top of the cording in the piping and glued it down with the liquid stitch. This gave me a finish at the top of my piping so I did not have to keep tucking it into the fold. I did the same thing at the other end of piping on the other side of the pocket.

DSCN3409I don’t know if I really like the look of the piping at the top of the pockets done this way but it is fine for this time. I think I need to read more on how to start and stop the piping on pockets. The piping did do its job and it helped to curve the edges of the pockets and hold the curve in place as I stitched the pockets on.

Plus, it looks really cute and makes the pockets stand out from the rest of the jacket.

There is a lot more to say about the sewing of this jacket but I’m going to stop here and give you a break from the long list of lessons I was learning on this project. Stay tuned for the finale of this backwards jacket next time!

Until then, sew forth and fleece on!

It A Trap (ezoid) Skirt!

DSCN2926When I found this trapezoid scalloped edged girl’s skirt pattern on the internet, I knew exactly what I wanted to do with the scraps that I had leftover from my minion shirt. The combination of the minion fabric, the banana fabric and the blue fabic had made for a fun shirt and it would definitely make a fun skirt too.

I was excited to get sewing but I knew that I had to start with a little math before I could take the first stitch.

Yes that’s right kids! Your teachers WERE RIGHT about the using math outside of school thing! Imagine that!

Since I was sewing empirically here, and not making this skirt for anyone in particular, so no particular size, I had to calculate how big I could make the trapezoids versus the amount of scraps that I had.

DSCN2554Luckily I’m not afraid of a little math, so after a few calculations, I found that I had enough scraps for a girl’s size 6 to 8 skirt, making the trapezoids 3 inches at the top and 5 inches at the bottom and 15 inches long. And as per my calculations, I would be cutting out 18 trapezoids in total, 6 from each of the three different fabrics and that would use up all the scraps I had.

I first cut myself out a trapezoid pattern piece and then I used it to start cutting. I tried to cut as accurately as possible so that all the pieces fit together nicely and would be even.

DSCN2717Cutting out the pieces took some time, but sewing the trapezoids together took even more time, plus each seam had to be pressed after I sewed them. I sewed each trapezoid from the bottom to the top to keep them as even as possible.

After the trapezoids were all sewn together, I used the skirt as my pattern to cut out the lining for the skirt. The pattern only called for only a small strip of lining to be used at the bottom of the skirt to make the scalloped hem, but I decided to fully line to skirt. This would take care of finishing all the trapezoid seams, and it would keep the girl’s panties from showing through the thinner minion and banana fabric and eliminate the hand stitching the pattern called for at the hem from only using a strip of lining.

DSCN2718Cutting the lining caused me a few moments of anxiety because of the amount of fabric needed to cut the lining. The skirt was made of scraps so really no large or useful sizes of fabric were used, but when the trapezoids were sewn together, they formed a circle skirt, and cutting a full lining on grain for a circle skirt did require a real size piece of fabric.

In fact, cutting this lining pretty much used up all the yellow lining fabric I had purchased on sale a while back. I was sad that this lining fabric was now all gone. It had been a great piece to turn to when I needed a lining for the little girls dress I had made. But, the husband comforted me by reminding me that there was now one less piece of fabric in the stash and that now I could go and buy more lining fabric. And who doesn’t love to go fabric shopping? Not me, that’s for sure!

DSCN2720With the lining all cut out and the its side seams sewn, placing right sides together and matching the hem, I sewed around the hem. At this time I cut out a cardboard circle to use as the pattern for the scalloped hem. I traced the circle onto the skirt, matching the seams of the trapezoids and the stitch line at the hem. After tracing a scallop on each trapezoid, I carefully sewed around each scallop edge. Trimming and snipping around each scallop was the next step followed by turning the skirt right side out. It was now time for a lot of pressing to the skirt hem.

DSCN2727Once the scalloped hem was done and pressed, it was time for the waist band. I had planned to use 3/4 inch elastic in the waist, so with a few more calculations, I cut the waist band from the blue fabric 2.5 inches wide and long enough to go around the top of the skirt. With right sides together, I sewed the waist band to the top of the skirt, serged the edges and pressed it towards the top of the waist band. I then serged the top edge of the waist band and pressed it over about 1/4 inch. I then folded and pressed the waistband over and stitched in the ditch to finish it off. I left a small unsewn portion to insert the elastic. I also added a small tag to the waist band to denote the back of the skirt from the front, although this skirt really does not have a front or back.

DSCN2723After the waist band was sewn up, it looked short, too short to fit 3/4 inches elastic into it. I am not sure where my calculations went wrong but I should have cut the waist band wider. I debated about unpicking the waist band and cutting a new wider waistband, but the thought of unpicking all the serging was unbearable, so I decided to use 1/2 inch elastic instead of the 3/4 inch that I had planned on. The 1/2 inch elastic fit into the waist band just fine and I think because this skirt is for a younger girl, the 1/2 inch elastic will wear fine too.

DSCN2725To determine how much elastic to use in the waistband, I measured the length of my finished skirt of approximately 15.5 inches. Looking at a chart I had downloaded off the internet, I cut my elastic 25 inches in length. 24 inches for the waistband and 1 inch for sewing it together. This length of elastic plus the length of the skirt meant I had made approximately a small size 8 skirt.

This worked for me. I do not think an eight year old girl is too old for a minion skirt. If I’m not too old for a minion shirt then an 8 year old girl is certainly not too old for a minion skirt. Perhaps I am just still young at heart!

DSCN2734I decided to do a decorative top stitch around the scalloped edge of the hem of this skirt. I think the scallops were sewn fine before I did this, but because this is a play skirt, and I am expecting it to be worn while running and jumping, a little extra strength at the hem certainly won’t hurt.

I think that this skirt turned out to be just adorable, and I am excited for a young girl to wear it and enjoy the minion and banana fabric as much as I have enjoyed making it!

This skirt has also given me one more option to use up my scraps with and I will keep it in mind that next time I am debating about what to do with a pile of scraps.

Until next time, sew forth and trapezoid on!

What About The Scraps? – Part One

DSCN2070I just love fabric! I love to hold it and feel it and measure it and imagine all the fun items that it could be made into. Then, I just love to fold it and hoard it in my stash until that special day when it finally is retrieved and made into something fun!

And that brings me to the age old question of “what to do with the scraps?”

After a project, should I fold up the scraps and return them to the stash or should they make their way to the donation box or the garbage? When I first started sewing, I saved every scrap, but over the years as the stash has grown in size, I have been more able to let go of and part with my scraps.

DSCN2071Now days, I evaluate my scraps based on a ranking system of importance.

1. Are there enough scraps left to make something with?

2. Did I enjoy working with the fabric?

3. How did the item wear when made from the fabric?

It was this evaluation that started my next sewing projects. DSCN2068

Left sitting on the cutting table were the scraps from my last few projects. I needed to clean off the table before I could cut out another project, so it was time to evaluate the scraps.

Large scraps were easily folded and returned back to the stash, but a couple of pieces were just not quite big enough to return to the stash. The first of these pieces was the scraps of purple and white knit left over from my last shirt.

The scraps were big enough to make something, so I did not want to just throw them away, and I enjoyed sewing with this fabric, plus my shirt has worn well, so I grabbed my Kwik-Sew books and I determined that I had enough scraps for a size 2 t-shirt with long sleeves. DSCN2072I already had the pattern traced, and in no time I had the pieces cut out and I was sewing them up.

To add a little something to this shirt, I top stitched the shoulder and sleeve seams. After sewing and serging these seams, I simple sewed the seam down from the top side of the shirt.

Looking at the results, I wish I had lengthened my stitches so it looked more decorative. I will do that next time. That was a good lesson learned.

IDSCN2069t was not hard to pick the Snoopy and Woodstock embroidery design for this little shirt. I worried that the embroidery design would be lost in the shell design of the shirt, but it did not once I had it stitched up. I think the embroidery design looks very cute and that it can easily be seen.

This little shirt was a fun and fast sewing project with fun results, plus the scraps were put to good use.

Hopefully, some little girl will enjoy wearing the shirt.

Stay tuned for the next scrap heap sewing project coming up soon.

Until then, sew forth and scrap on!