Continuing on with the sewing of the denim ants in a jar vest…
The next step in the sewing process was to add the pockets. Since I really did not have a pattern for the side seam pockets, I decided I would design and sew them how I wanted. In designing the pockets, I wanted the fun flannel I was using to make the pockets to show, so I decided to cut a rectangle from the sides of the jacket fronts. But, how big should I cut the rectangle? After some thought, I cut the rectangle what I thought the size should be, 5 inches tall by 1 inch deep, and then cut the pockets to match. With this size of square, I would place the pocket 1.5 inches from the bottom of the fronts.
In the sewing process, I noticed right away that I had a good size opening for the pockets but not much depth to the pockets. I should have cut the opening square shorter and used that extra length for the pocket depth. It was too late now though as the fabric was already cut. So, the finished pockets are very cute and the flannel is showing, and the pockets will certainly keep the wearer’s hands warm but the pockets won’t be too useful for hold many items due to their short depth. Another lesson learned for the next time!
The next step was to add the bottom band which was a little difficult due to the stiffness and weight of the denim. I had to use a little liquid stitch to help hold the denim in place to start and stop the stitch in the ditch seam. There was a lot of bulk from the denim front, the seam allowance from attaching the band, and the folded over finish of the band, i.e. 5 layers, in this seam. I trimmed the seam allowance but it was still bulky and difficult for my sewing machine to get started on this final band seam, but I made it through it ok.
The final step was to add the buttons. I measured evenly to place the buttons, but when it came to sewing them on, I had to move the top button down slightly due to the bulky denim seam at the top of the vest. This left the buttons mis-spaced slightly. The top button is not quite high enough to keep the vest closed around the neck if it is worn closed. If the top button is left undone, the vest opens a little too much before the next button. This could have been avoided by sewing horizontal buttonholes and avoiding the bulky denim seam at the top, but because of the pieced strip on the front of the vest to add the extra inch, I had to make the buttonholes vertical. If I had given the placement of the buttons versus the bulky denim seams a little more thought before I started to sew, I could have placed the buttons better. Another lesson learned for next time!
Now that the vest is complete, I am pleased with the end results. I also think the vest will wear just fine, and I hope some kid will enjoy wearing it too. Many lessons were learned from the making of this vest and I hope to remember all these lessons and apply the lessons to my future sewing projects.
Until then, sew forth and button on!