Tag Archive | Movie

Don’t Panic – Part 2 of Sew it Begins.

Although I worked on both the husband’s new shirt and my new shirt at the same time, the husband’s shirt was the first one completed.

The husband picked a purple single knit with quite a bit of stretch from the stash for his shirt. I was not excited about getting back into the sewing grove with a stretchy knit that could possible give me grief, but what sewing project doesn’t present itself without certain challenges. This stretchy knit would certainly sharpen my dull sewing skills quickly. I had plenty of this fabric to work with so the shirt would be entirely made from this fabric, instead of piecing it together as my last few had been.

After laundering the fabric and cutting out the pattern pieces, it was time to interface the collar and the yoke. I picked a nice piece of interfacing and ironed a small sample piece onto a scrap of the purple knit. It ironed on great, but when I stretched the knit, the interfacing disintegrated and shredded to pieces. After that disappointment I started cutting samples from other pieces of interfacing and ironing them to the knit. Some were better than others but none were what I wanted. I wanted an interfacing that would stop the knit from stretching and make the collar stay formed but not too stiff.

Was I expecting too much from the interfacing?

I tried all different kinds of interfacing, woven, non woven, knit, and so on and I finally found one that I thought would work and hold up well with the stretch. I cut out the interfacing for the collar only to find that I did not have enough of this interfacing for the yokes. So, off to the store I went. I picked out what I thought was the same interfacing, but it was not. I studied the interfacing from the stash again and settled on one that was acceptable. You know, I just don’t understand interfacing. I have done research and read up on interfacing several times and purchased a wide variety of interfacings and tried them all, but I still have trouble when it comes to choosing and using the right interfacing for a project. Trial and error is the only answer I have come up with for my interfacing dilemma.

With the pieces of the shirt cut and interfaced, I started to sew. I was very careful and cautious with the knit, watching the stretch with each seam. The hems, of course, were the most tricky part with the stretch but with care, it all came out good. And yes, this knit shirt did a great job of sharpening my sewing skills.

When it came time for an embroidery design, the husband picked the “Don’t Panic!” design from the Hitch Hikers Guide to the Galaxy. I knew this design would look good on the purple shirt but when I was done stitching the design, it looked great. After sewing the buttonholes and the buttons on, the shirt was done.

The husband likes his new shirt and I love being back in the sewing studio, sewing away.

Stay tuned for details about my new shirt in my next post.

Until then, sew forth and Don’t Panic on!

Star Wars Senior

DSCN4060DSCN4067“They won’t fit.” That is the reply I got from the husband when I showed him my latest sewing project, the kid’s Star Wars sweatshirts. What do you mean they won’t fit? These shirts will fit a 2 year old just fine. Then, it dawned on me. These shirts would not fit the green eyed husband. So, my next sewing project would be a Star Wars shirt for the husband.

 

Looking at my Star Wars embroidery designs, I picked a maroon colored knit from the stash for the husbands shirt. After laundering the fabric, I laid it out on the cutting table to get started only to find out that the maroon fabric was not big enough to make a shirt for the husband a shirt from it. So, the husband picked a black knit from the stash for the sleeves and the collar. As I cut out the fabric, I was glad that I did not have enough of the maroon fabric. The black and maroon fabrics looked really good together. Far better than the maroon would have looked alone.

 

DSCN4044DSCN4043It’s been awhile since I have made the husband a new shirt, but the sewing process went smoothly enough. Both the maroon and black knit fabric are nice fabrics and where easy to work with. The husband picked his embroidery design, the Stormtrooper with the sun ray rising sun background, and it embroidered on to the shirt nicely.

 

All was going along nicely until the husband picked white/clear buttons and white thread for the double needle hems on the bottom of the shirt and the sleeves. I was more then a little apprehensive about this. Sometimes when using a double needle, my sewing machine and the knit fabric that I’m DSCN4065DSCN4063sewing with like to argue during the sewing process. I can hide a lot of this arguing with a matching thread color but could I hide the arguing with a white contrasting thread?

 

Luckily, as I mentioned before, these were nice knit fabrics to work with and they did not argue with the double needle and the hems sewed fairly smoothly and they look good.

Finally with the last step of sewing the buttons on, the husband’s Star Wars shirt was done!

 

DSCN4041DSCN4042But before I could go back to sewing some more kid’s Star Wars clothes, the husband pointed out the Chewbacca fleece blanket kit we purchased at Joann’s last half price sale. After the husband gave me some sweet puppy dog eyes that said “Please make my blanket next”, I got started on his blanket.

 

To increase the size of the blanket, I did not cut off the black dotted line edges of the blanket that were supposed to be cut into strips and then tied together. Instead I squared the top and bottom fleece pieces and then sewed them wrong side together 1/8 inch from the edge. Next I cut 1/4 inches from the edge with the skip stitch blade. The blanket was then ready for its edge to be crocheted on.

 

DSCN4035DSCN4038After crocheting the foundation row, I tried several different edges like scallops and triangles but the husband liked the chained edge the best. So I chained 3, skipped 2 stitches on the foundation row, then slip stitched in the 3rd stitch. On the next row, after changing colors, I chained 3 then slip stitched in the next chain 3 of the 2nd row. For the 3rd row, I picked a different color but I didn’t like the multicolor look so I changed back to the foundation rows color and crocheted the 3rd row like the 2nd row. I had planned to crochet a 4th and 5th row, but this did not look good so I stopped after the 3rd row.

 

The husband was pleased with his finished Chewbacca blanket as well as his new Stormtrooper shirt. Both were fun for me to sew and crochet. Now, that the green eyed monster has left the sewing room. I can get back to sewing more kid’s clothes.

Until then, sew and crochet forth and remember to always let the Wookiee win!

A long time ago in a galaxy far far away…

a long time ago SWDuuh Duuh da da da Duuh Duuh da da da Duuh Duuh dun-dun-dun-duuuuh…

A long time ago in a galaxy far far away…

I BECAME A STAR WARS FAN.

It was in May of 1977 when my love of all things Star Wars began.

As I watched the action of the original Star Wars movie on the big screen of our small town theater, the Force moved over me and I was hooked for life…

I wanted to join the rebel forces immediately and be lead by Princess Leia to defeat Imperial Forces of Darth Vader, the Storm Troopers on the Death Star. I wanted to stand side by side with Luke Skywalker and feel the force flow through me as I applied Obi-Wan Kenobi’s lessons to become a Jedi Master. I wanted to interact with the coolest robot droids ever, R2-D2 and C3PO. And who didn’t have a crush on the handsome and rugged Han Solo or want to fly the Millennium Falcon with Chewbacca?

830px-Got_A_Bad_feeling

It was a few years later, but still very much a long time ago in a galaxy far far away when my love for Star Wars increased when I said “I Do” to the husband who, believe it or not, was an even bigger Star Wars fan than I was!

And, it was still a few years after that big event that Star Wars would have a HUGE impact on my sewing, embroidery and crocheting skills.

 

R2-D2 Embroidery Design

This is the very first hand digitized design that I ever made! R2-D2 for my Husbands Shirt.

My first sewing and crafting Star Wars adventure began with the purchase my first embroidery machine a long time ago. And even though I now had the tools to put any design that I wished on any of my sewing projects, there was sadly a lack of pre-made Star Wars embroidery designs for me to purchase. This lack of embroidery designs was the beginning of a whole new sewing and embroidering adventure for me, learning how to create my own embroidery designs.

The Force was not strong with me at all as I began the task of digitizing my very first Star Wars designs, and I made a lot of mistakes along the way. But as time has passed, I have grown skilled in the Force and my digitizing skills have improved to where I have a very nice selection of Star Wars designs to call upon whenever the need arises.

Occassionaly other sewing Star Wars fans have appeared with some of their own embroidery designs to help increase my selection. I won’t bore you here with the details of how to create your own embroidery designs, but if you want more information on how to do that you can click HERE for my “How to digitize your own custom embroidery designs” post.

Star Wars Miscellaneous Embroidery Designs

Some of my current Star Wars Embroidery Designs!

Over the years, I have created, sewn and stitched many items for the husband and family members with Stars Wars designs embroidered on them. Many of these were made way before the days of blogging, so sadly I have no links for you to read about them, and for that I am sorry.

My favorite Star Wars sewing project so far though is the gray Darth Vader shirt that I made for the husband to wear while we were at a Star Wars Weekends event at Walt Disney World’s Hollywood Studio’s Park in Florida. img_0901

DSC06157And my sewing ego about burst as the husband received compliments on his custom made Darth Vader Star Wars shirt from several of the actors of the Star Wars movies while we were there including Anthony Daniels (C-3PO). Click HERE to read about the making of that shirt and click HERE to see my hand crocheted Domo Kun Plush having a great time while at a Star Wars Weekends event. And for an added bonus, click HERE for some sewing advice from Han Solo.

han-solo-300x240It wasn’t until 22 years after watching the first movie in 1977 with the release of Star Wars Episode 1 in 1999 that I was finally able to purchase my first piece of Star Wars fabric. It was a cotton print of a flaming Darth Vader helmet on a black background. I had wonderful plans for this fabric when I purchased it, but it was quickly brought home and placed in the precious fabric stash unused and that is where it still lives today.img_3405

But, the second piece of Stars Wars fabric that I purchased, a fleece remnant with Darth Vader on it, was used to make the nephew a blanket with when he was a youngling. And the Force was strong with this blanket. It was the first blanket that I ever crocheted and edge around and it was the beginning of my crocheting and amigurumi making adventures. To read more about this blanket, click HERE. Since then, I have always purchased Star Wars fabric whenever and wherever I could find it.

star-wars-force-awakens-official-poster copyToday, “As The Force Awakens”, you can find item from the Star Wars Universe like R2-D2, C-3PO, BB-8, Rey, Finn, Captain Phasma and Kylo Ren, everywhere including in the sewing and crocheting world.

Over the last year, I have seen Star Wars sewing blog posts pop up everywhere as the Force is again re-embraced by the younglings. There are many new Star Wars related designs made with gorgeous new Star Wars fabrics to be seen and read about everywhere I turn.

Star Wars Fabrics

A few of the MANY Star Wars Fabrics I now own!

And I now see bolts of wonderful Star Wars fabrics lining Walmart and Joann’s shelves every time I enter their stores (And, YES, before you ask, I have purchased a fair amount of this fabric to live in the stash.).

And the latest thing I have seen is the new Star Wars Amigurumi crochet book and kit (And, YES, before you ask, I have already purchased that kit too) to let you crochet all your favorite Star Wars Characters for yourself.

SWCrochetBookNeedless to say in the 38 years since my “first awakening to the force” Star Wars sewing and crafting has come a long, long way. Far beyond the days of me struggling greatly while trying to digitize my first Star Wars designs because nothing else was available.

I am very excited for the new Star Wars VII: The Force Awakens movie to open on December 18th. I certainly won’t be the first person in line to see the new movie, but I might be the second :-).

I would like to be one of the first to start sewing and crocheting with the new fabrics and patterns that the buzz for this new movie has created, so hopefully you will see some fun new Star Wars projects from me on here in the very near future!

Until then, sew with the Force and crochet on! And may the Force be with you always!

 

You’ve been a good friend Charlie Brown!

Peanuts Gang Movie SmallThe new Peanuts movie is due to hit theaters in the next few weeks on November 6th, 2015.

Peanuts Movie

And for most of you out there in TV Land you might have heard about it, you may have even seen a movie preview or two, or even seen one of the fun products that have had some of the Peanuts Gang promoting the product with a movie tie-in to cross promote their products.

Peanuts Movie Strips 1-1

Thanks to the dedication of Charles M. Schulz and his estate since his passing, some of you may have even known who Charlie Brown, Snoopy, Woodstock, Lucy Van Pelt, Linus Van Pelt,  Sally Brown, Peppermint Patty, Marcie, Schroeder, Franklin, Pig Pen, Re-Run Van Pelt and all of the other wonderful characters from the Peanuts universe that have, since 1950, brightened so many different peoples lives around the world before you even knew there was a new Peanuts movie coming out.

For those of you, I dedicate this blog post. It is because of fans like you and I that the Peanuts Universe has continued to thrive and grow over the last 65 years since it’s initial creation by Charles M. Schulz.

Peanuts Movie Strips 2-1

Being a huge Peanuts and Snoopy fan myself, I have over the years created many fun sewing and crafting items because of my love for them since what seems like my birth.

For those other fans out there like myself, shown below is an easy to navigate guide of my Peanuts and Snoopy posts over the years.

Enjoy!

Snoopy Flying Ace

And don’t forget to go and see the new Peanuts Movie on November 6th!

These Posts are Shown with their original Title first, Category second, Sub-Category third, and are all in date order from the oldest to newest:

Sewing with Mom – 11/18/2007 – Embroidery Woman’s Shirt

The Corn Shirt – 11/18/2007 – Embroidery Woman’s Shirt

Dad’s Doings – 12/06/2007 – Latch Hook

The Dog in the Mouse’s House – 01/26/2008 – Fabric

The Snoopy Sheet – 05/02/2008 – Fabric

More Blanks to Embroider on! – 08/09/2008– Embroidery Children’s Clothes

New Jammie for Me! – 08/13/2008 – Embroidery Woman’s Shirt

Snoopy Designs – 10/11/2008 – Embroidery

New Jackets for Christmas – 12/23/2008 – Embroidery Jackets

Souvenirs from Florida – 02/08/2009 – Fabric

A Stack of Letters – 03/23/2009 – Embroidery Children’s Clothes

Why Fight It? – 05/13/2009 – Embroidery Woman’s Shirt

My Sewing Machines – Part 2 05/29/2009 – Embroidery

Follow Up #1 – Pattern Making 08/01/2009 – Embroidery Baby Sleepers

I Could See It – 08/27/2009 – Embroidery Woman’s Shirt

No I didn’t forget about you… – 09/24/2009 – Embroidery Baby Sleeper

Improvising Tip Towels to Make Baby Bibs – 11/13/2009 – Embroidery Baby Bibs

Inexpensive Panel – 12/18/2009 – Crocheted Blanket

Amigurumi Snoopy – 04/20/2010 – Amigurumi Crochet

Almost Again – 07/16/2010 – Embroidery Baby Sleepers

Embellishing Baby Towel Bibs – Part 1 – 08/22/2011 – Appliqué Baby Bibs

Embellishing Baby Towel Bibs – Part 2 – 08/29/2011 – Appliqué Baby Bibs

From Box Number Two… – 10/14/2011 – Embroidery Man’s Shirt

And Last In Box Number Three – 10/22/2011 – Embroidery Children’s Clothes

Hey, Little Birdie, You Cool Cat! – 04/13/2012 – Amigurumi Crochet

Bosom Buddies – 04/26/2012 – Amigurumi Crochet

May Day Giveaway – 05/01/2012 – Amigurumi Crochet

I Can’t See To Take My Own Advice – 07/20/2012 – Crochet Blanket

The foam, it was puffy… – 08/03/2012  – Embroidery Children’s Clothes

Purple Snoopy (But Not Grape Flavored) – 08/13/2012 – Embroidery Children’s Clothes

Extras – 09/28/2012 – Embroidery Baby Sleepers and Baby Bibs

But It’s Too Hot – 04/08/2013 – Embroidery Bathrobes

The Long and Winding Road – 07/08/2013 – Embroidery Woman’s Shirt

But What About Me? – 08/19/2013 – Embroidery Man’s Shirt

Just Three Inches More… – 05/23/2014 – Embroidery Woman’s Shirt

Several Snoopy’s But Just One Woodstock – Part 1 – 10/03/2014 – Amigurumi Crochet

Several Snoopy’s But Just One Woodstock – Part 2 – 10/08/2014 – Amigurumi Crochet

Several Snoopy’s But Just One Woodstock – Part 3 – 10/15/2014 – Amigurumi Crochet

What About The Scraps? – Part One – 06/20/2015 – Embroidery Children’s Clothes

What About The Scraps? – Part Two – 06/26/2015 – Embroidery Children’s Clothes

WOW!

40 Posts about Peanuts and Snoopy so far and I have a few more scheduled very soon!

I must really like them!

I hope you do too!

Until next time Charlie Brown forth, and Snoopy on!

WWWHHHAAATTT!?! – The Minions – Part 2

DSCN2582I had already spent the appropriate amount of time worrying about making this minion shirt so it was easy to get started on it.

I really wanted this shirt to sew together without any problems, so I decided to take my time and think things through carefully. So after laundering and ironing the fabric , it was time to start cutting.

I cut very carefully and added the alterations that I wanted to the pattern as I cut. I was quite selective about the interfacing I chose to use and I went ahead and cut it out too.

DSCN2584As I started to sew, I realized that I did make one cutting/design error, well not really an error, but a small change to the design. In my mind, the shirt had the minion fabric on the right and the blue on the left, but I had cut the left front from the minion fabric and the right front from the blue fabric. Mmmmmm, was this going to look ok? After much thought, I decided it would look fine, and maybe better because the buttons would be on the solid blue fabric instead of lost in the the minions fabric.

DSCN2581The sewing when smoothly. I took my time and tried the shirt on after each step. I also ironed each seam carefully as it was sewn. As I serged the edges of the sleeves, preparing them to be hemmed, I did not notice that I I was running out of thread on one of my loopers. Once the looper ran out of thread, my serged edge was ruined. Luckily, I had debated about cutting 1/2 inch off the length of the sleeves and had not done so yet. So, I cut the 1/2 inches off the length of the sleeves ridding me of the bad serged edge, threaded new spools of thread on my loopers and serged the new edges.

With the sewing on of the final button, I declared the shirt done and tried it on. The fit seemed to be good, but as I looked at myself in the mirror, the shirt needed to be something else. The right blue front was just that, blue. I grabbed some scraps and started adding to the blue front piece.

DSCN2493At first, I wanted to add a stripe of minion fabric down the blue front, but that was too much of an accent. I thought about digitizing a minion embroidery design. But since I was too excited about wearing the shirt, and it would take time to perfect the design and I wanted to wear the shirt now. My next thought was a pocket. This would not be a functioning pocket, just something for show, so it would not have to be any certain size or style. I decided to make a temporary pocket and see how it looked pinned on.

DSCN2496To make the pocket, I cut out two squares of fabric and then rounded the corner on one end. Next, with right sides together, I sewed completely around the two modified squares. Next, I made a small cut in the fabric that would be inside the pocket. I turned the pocket right side out through this slit. After a lot of pressing, with a little seam to seam, I mended the cut that I made in the pocket to turn it inside out. This worked well and I had a finished pocket. Since I will not be putting anything in this pocket, I am not worried about the seam to seam mending holding up with wear and tear.

Placing the pocket on the blue front, I liked it, then with another look, I did not, then after a few minutes, I liked it again.

Argh!

DSCN2498I turned to the husband for his opinion and he said that he did like the pocket, so I sewed the pocket to the front of the shirt. I am still up in the air as to wether I like the pocket or not but it is sewn to the shirt for now.

The shirt has passed the “wear” test and I really like it. My alterations seem to be good. This shirt is fun to wear and is very comfortable.

It also makes me crave bananas for some reason…

Until next time, sew forth and banana on!

WWWHHHAAATTT!?! – The Skulls – Part 1

Despicable-me-minions-480x477Its what I want for Christmas. I told the husband that all I wanted for Christmas this year was a minion. Now, not one of those little ones from McDonald’s or a plush one, or even one of those plastic ones that talk. I wanted a really live, living, breathing minion. And, of course, I don’t want my minion to be lonely while I’m at work so I had better have a couple of minions. The husband said he would see what he could do but in the meanwhile I decided to satisfy my minion need with some minion fabric.

When I saw the minion fabric at Walmart, I knew that I just had to have it. I had absolutely no idea what I was going to make from it, but I just knew that I must have some. I purchased 1 yard and brought it home. The fabric sat on the cutting table while I debated what I wanted to make from it. I thought about all kinds of fun kid’s clothes that I could make from it, but instead I only wanted it for myself, so I decided to make myself a shirt from it.

Because let’s be honest here… Who doesn’t need a minion shirt?

DSCN2591Before I could cut into the minion fabric, I found myself fabric shopping again when I ran across this banana fabric. Seriously, it was bananas! BANANA! So of course, I needed some banana fabric to go with my minion fabric so I purchased one yard of the banana and headed home. Once I was home, I placed it next to the minion fabric on the cutting table. And I thought I was all ready to go. But, before I could cut into the minion fabric or the banana fabric, I found myself scoping out Walmart’s fabric department again, only to find a different minion fabric that I liked better for my shirt than the first minion piece, so one yard of this second minion fabric made it way to my cutting table as well.

DSCN2586Finally all set and before I could go fabric shopping again, I decided it was time to design and make my minion shirt. I quickly decided to make one front from the second minion fabric that I had picked up, the collar and sleeves from the banana fabric and then to find some blue in the stash for the other front side and the back. After laundering and ironing the fabric, I pulled my sloper pattern from the closet, only to remember that I was in the process of altering my basic sloper.

Augh!

I did not want to cut into my precious minion and banana fabric with a pattern that needed it’s alterations tested.

DSCN2585So, I folded up my minion and banana fabric and pulled some fabric from the stash to test my alterations on. I like the colors of this fabric a lot but it has not become a shirt till now because it is very thin. I was skeptical of how it would wear being so thin, but I decided that since this was a test shirt, I would go ahead and use this fabric to give it a try.

So I cut out my altered pattern and I started to sew it up.

The sewing went smoothly. I was afraid that my machine would argue about sewing this thin fabric but all went well, and soon it was time to sew buttonholes and buttons. Sitting on the top of my button box was some sugar skull buttons that the husband got me awhile back when I needed skull buttons for the girl’s cross back tops. I laid the buttons out on the shirt. They did not really match but they looked fun, so why not. Again, this was just a test shirt.

DSCN2589Rather than picking out just one design of sugar skulls, I sorted through the pack of buttons and picked five different designs. When I sewed the buttons on, each button had its holes in a different spot. One button’s holes were vertical, one was horizontal, and the others were at a variety of angles. This presented a challenge to sew the buttons on straight. I had to measure and turn the fabric every which way to keep the skulls on the buttons right side up. Luckily with some patience and time, I got the buttons sewn on correctly.

DSCN2590I have had a chance to give this shirt a “wear test” and it passed just fine. There were a couple of small alterations that are needed to the armscye and button placement but I had solved the fitting problem at the neck from my last shirt made from this pattern.

But the good news is that I feel good enough about my alterations to my pattern to start the minion shirt as my next project.

Until then, sew forth and BANANA on!