Tag Archive | peter pan

Girl’s Fleece Jacket (Done Backwards) – Part 2

DSCN2088When I started this jacket, I decided to go ahead add the optional cuffs to the sleeves.

The cuffs looked so cute on the jacket on the pattern envelope, that I wanted this jacket to have the cuffs. But when it came time to sew the cuffs on, they were not turning out very well. They were just too bulky. The cuffs are made from two pieces of fleece. The first piece is sewn to the sleeve, then the next piece is sewn to the first piece and then folded over to make the cuff. I cut out the cuffs, sewed the cuffs to the sleeves and then removed the cuffs. In my opinion, this was a bad design for a fleece cuff due to so many seams in the cuffs and the bulkiness these seams caused. There are four layers of fleece in the top seam of the cuff, and that is just too many layers of fleece.

DSCN2084If I wanted to keep the cuffs, I had to come with a solution, so I gave it some thought and came up with some ideas.

First, the sleeves could be cut longer to make the cuffs. This would eliminating the bulky seams, but I had not cut my sleeves longer so this solution was out for this particular jacket. Another solution would be to use a thin lining fabric as part of the DSCN2086cuff, but I did not have it in me to dig through the stash to find a matching fabric. My third solution was to skip the cuffs, and make more bias tape. I would finish the edges of the sleeves with yellow bias tape to match the pockets. (My first thought was to use the bias tape to finish the edge of the cuffs, but eliminating only one of the layers in the bulky cuff was not enough.) So, I choose this as my plan. This jacket would not have cuffs, and I would finish the sleeves edges with the yellow bias tape.

Thinking back, I could have had cuffs on this jacket by combining the solutions. I could have used a lining fabric and the bias tape to make the cuffs and eliminate the bulk. Hmmm. Maybe I will try that on the next jacket.

DSCN3414By using the bias tape on the sleeves, I did not have to worry about a hem or the fact I had not cut the sleeves longer to accommodate a hem. I applied the bias tape to the edges of the sleeves, trimmed the seams and turned the bias tape to finish the seams. I noticed that the thin bias tape looked weak at the bottom of the heavy sleeves. The way I got rid of this weak look was to not trim the seam inside the bias tape so much, which was different from any other time I have applied bias tape. Previously, when I applied bias tape, I wanted the seam allowance trimmed out before folding the tape over. If the seam allowance was left inside the bias tape this time, the look was much fuller and it looked better.

DSCN3418It was now decision time. Which way did I want the jacket to cross, left over right or right over left? After a lot of thought and debating, I decided to cross the fronts as if it were a boy’s jacket, the left front on top of the right front. This will probably drive the little girl that wears this jacket nuts as she tries to button the jacket backwards, but the half froggy’s that I got from folding the jacket the other way just didn’t look good. Hopefully whoever wears this jacket won’t mind the backwards buttoning buttons if it is a girl.

I was dreading making the buttonholes on this jacket. I was not sure how my sewing machine would handle sewing buttonholes on fleece. Sometimes, even with thin non-stretch fabric, my sewing machine has a mind of its own when it comes to making buttonholes and sews whatever it wants to. To help combat this problem, I made horizontal buttonholes, and held my breath as the buttonholes were sewn, but my sewing machine did great and the buttonholes turned out just fine.

DSCN3413If I had known then, at the beginning of the sewing of this jacket, what I know now, nearing the end of the sewing of the jacket, I would have added piping to the peter pan collar to coordinate with the finished design of jacket. It would have been really cute to have had the bright yellow piping around the collar to match the piping on the pockets and the bias tape on the sleeve. This is definitely something I will keep in mind for the next jacket.

DSCN3416With the sewing on of the last button, the jacket was finally done!

The making of this jacket was a learning experience from the beginning to the end, from the cutting of the fleece, to the sewing of a back facing, to the piping curved pockets to the designing of the fleece cuffs. There were many lessons learned on this fleece jacket.

All in all, I think the jacket is very cute and I hope some little girl will be willing to wear it and will enjoy it!

Until next time, sew forth and fleece on!

Girl’s Fleece Jacket (Done Backwards) – Part 1

DSCN3413Over the years, I have accumulated a massive amount of polar fleece in the stash. At first, these fleeces were only purchased with blankets in mind, but over time, my ideas for fleece fabric has expanded. So, when I saw this pattern, McCalls M4981, especially designed to be made from fleece, I knew what I wanted to sew next.

IMG_0002 (2)M4961 is a pattern for a girl’s unlined fleece jacket with a peter pan collar, patch pockets and buttons closures. I was excited to get started, but I quickly learned that this project was not going to be an easy sew or a fast sew.

To start, I selected a piece of fleece from the stash. I chose this cute girl’s design of froggy’s, bees and rainbows on a brown background. I did not have to launder the fabric before I got started since their was no preshrinking needed with this fleece. I traced the pattern, size 6, and got started with the cutting process.

DSCN2575Cutting out this jacket was not an easy or quick task. The print on this fleece was so far off grain that it was almost impossible to cut the pieces so the froggy’s and rainbows were standing up straight. I pulled the fabric and repositioned the pattern pieces until I finally got the pieces cut out. When I finally finished the cutting process, I realized I had lined up the right and left front backwards from each other.

DSCN2572When I folded the right front over the left front for a girl, I got a nice froggy edge on the right side and half of a froggy edge on the left side, but if I folded the front as you would for a boy, left front on top of the right front, then I had a nice froggy front. So, should I have a poor looking front with half froggy’s and cross the jacket for a girl or have a nice looking front and cross the jacket for a boy? That was the question. This question did not have to be answered right away so I decided to move on.

DSCN3411I did add some thin interfacing to the facings and the collar. The husband thought I was crazy for adding more bulk to the fleece, but I explained to him that was why I was using such thin interfacing. I just wanted something to stabilize the fleece at those spots and keep it from stretching while sewing, particularly when it came time for buttons and buttonholes.

DSCN2074To start the sewing process, I did not read the pattern guide at all. Looking at the pattern pieces, the sewing of this jacket seemed pretty straight forward, So, I just got started. Who needs directions anyway? Am I right? I sewed and pressed the collar, serged the facings edges, folded them over and sewed the facings to the collar. Normally, my next step would be to sew a piece of twill tape to the collars inside edge to finish it and then tacked the facings to the shoulder seams. This pattern has a back facing as well though, and I stopped for a moment as I pondered how I was supposed to sew it on. I then turned to the pattern guide and read that sewing the back facing to the side facings should have been the first step before adding the collar.

Too late now!

DSCN3410I was certainly not unpicking all my sewing that I had done up to this point. My first instinct was to grab my twill tape and just throw away the back facing but then I came up with plan to attach the back facing. After some tedious sewing, I got the back facing sewn on, only to find out that I had sewn it on backwards. The wrong side of the fleece was facing out. Augh! There was no way I was unpicked the back facing just to flip it over. It would just remain backwards. Sometimes, just when you think you know it all, and you certainly know better than some pattern maker and you get ahead of yourself, you find out too late just how wrong you are…

DSCN2080When it came time to sew the pockets, I debated about how to get nice smooth curved pockets since the use of the iron was of limited use with the fleece. I had read about using piping to help curve the pockets so I decided to give it a try. I cut bias strips from yellow cotton scraps and made the piping for the pockets. When it came to sewing the piping to the pocket, I was having trouble starting the bias tape in the fold of the pocket because of the bulk of the fleece. I turned to some liquid stitch for help. I folded the yellow fabric over the top of the cording in the piping and glued it down with the liquid stitch. This gave me a finish at the top of my piping so I did not have to keep tucking it into the fold. I did the same thing at the other end of piping on the other side of the pocket.

DSCN3409I don’t know if I really like the look of the piping at the top of the pockets done this way but it is fine for this time. I think I need to read more on how to start and stop the piping on pockets. The piping did do its job and it helped to curve the edges of the pockets and hold the curve in place as I stitched the pockets on.

Plus, it looks really cute and makes the pockets stand out from the rest of the jacket.

There is a lot more to say about the sewing of this jacket but I’m going to stop here and give you a break from the long list of lessons I was learning on this project. Stay tuned for the finale of this backwards jacket next time!

Until then, sew forth and fleece on!