Tag Archive | pockets

Some Lessons Learned For Next Time – Part 2

Continuing on with the sewing of the denim ants in a jar vest…

DSCN3525The next step in the sewing process was to add the pockets. Since I really did not have a pattern for the side seam pockets, I decided I would design and sew them how I wanted. In designing the pockets, I wanted the fun flannel I was using to make the pockets to show, so I decided to cut a rectangle from the sides of the jacket fronts. But, how big should I cut the rectangle? After some thought, I cut the rectangle what I thought the size should be, 5 inches tall by 1 inch deep, and then cut the pockets to match. With this size of square, I would place the pocket 1.5 inches from the bottom of the fronts.

DSCN3524In the sewing process, I noticed right away that I had a good size opening for the pockets but not much depth to the pockets. I should have cut the opening square shorter and used that extra length for the pocket depth. It was too late now though as the fabric was already cut. So, the finished pockets are very cute and the flannel is showing, and the pockets will certainly keep the wearer’s hands warm but the pockets won’t be too useful for hold many items due to their short depth. Another lesson learned for the next time!

DSCN3530The next step was to add the bottom band which was a little difficult due to the stiffness and weight of the denim. I had to use a little liquid stitch to help hold the denim in place to start and stop the stitch in the ditch seam. There was a lot of bulk from the denim front, the seam allowance from attaching the band, and the folded over finish of the band, i.e. 5 layers, in this seam. I trimmed the seam allowance but it was still bulky and difficult for my sewing machine to get started on this final band seam, but I made it through it ok.

DSCN3531The final step was to add the buttons. I measured evenly to place the buttons, but when it came to sewing them on, I had to move the top button down slightly due to the bulky denim seam at the top of the vest. This left the buttons mis-spaced slightly. The top button is not quite high enough to keep the vest closed around the neck if it is worn closed. If the top button is left undone, the vest opens a little too much before the next button. This could have been avoided by sewing horizontal buttonholes and avoiding the DSCN3928 (1)bulky denim seam at the top, but because of the pieced strip on the front of the vest to add the extra inch, I had to make the buttonholes vertical. If I had given the placement of the buttons versus the bulky denim seams a little more thought before I started to sew, I could have placed the buttons better. Another lesson learned for next time!

Now that the vest is complete, I am pleased with the end results. I also think the vest will wear just fine, and I hope some kid will enjoy wearing it too. Many lessons were learned from the making of this vest and I hope to remember all these lessons and apply the lessons to my future sewing projects.

Until then, sew forth and button on!

Some Lessons Learned For Next Time – Part 1

DSCN3928 (2)My latest sewing project was destined to be yet another learning experience for me.

After the successful sewing of the dinosaur vest, I wanted to make another vest. When I made the dinosaur vest, I had envisioned so many different options and fabrics for these vests, so this made it easy to decide that my next sewing project would be to make some of these vest options a reality!

The designing of this vest was not difficult at all. When I was picking out the fabric for the dinosaur vest, I had also pulled out a denim scrap that was just big enough to make a vest and a greenish blue flannel with yellow bug outlines from the stash. I could see a vest from these two pieces of fabric and I knew that I would sew one of my favorite embroidery designs, some ants escaping from a glass jar, on the front. Because of the large size of the embroidery design, I would give this vest side seam pockets rather than patch pockets.

With the design of the vest all outlined, it was time to cut it out and get sewing!
DSCN3931 (1)When I laid out the pattern pieces of Simplicity 8902, on the denim fabric, I remembered that I needed to add an inch to each front for the button overlap. I carefully laid the pattern pieces out correctly to cut the extra inch, but then I promptly cut along the edge of the pattern piece as shown on the pattern and I did not add the extra inch. How dumb was that? Well it was done now and I couldnt undo it so I decided it was a lesson to be learned for the next time I make this pattern.

The denim scrap that I had was not big enough to cut two new fronts, so instead I cut two 1.5 inch strips of the denim to add to the fronts of the vest. The strip would look like an intended button placket rather than a fix, so all was good despite the cutting error that I made. After cutting out all the pieces and remembering to add the extra inch to the front of the lining, it was time to being sewing.

DSCN3930 (1)The sewing process started with embroidering the design to the front of the jacket. I remembered that I wanted to do the embroidering first before adding the pockets to keep the pockets out of the way of the embroidery. I also remembered that I wanted to move the embroidery design down so that there would not be an issue with the collar covering some of the design.

What I had forgotten was that the ants embroidery design is two inches taller than the dinosaur design and I did not remember to take that into account when positioning the design. So, even though I moved the design down on the vest, the top of the design was still higher than I wanted it due to the extra height of the design. After stitching the design to the front of the vest, I realized that the top of the ant design was still going to be under the collar, and not just at the edge of the collar like the dinosaur design but that the ant at the top was going to be under the collar. That will be another lesson learned for next time I use this design!

DSCN3932 (1)Flustered even more, I now had to come up with a solution to fix the collar/embroidery design problem. I thought about making this vest collarless or adding a standing ribbing collar that would not fold over, but I did not like the look of these options.

I decided to see if I could just shorten the collar enough so that it would not cover the ants but it would still fold over and look ok. To do that I cut over an inch ff the bottom of the collar. The collar looks a little small now that it is done, but it works just fine. The collar lays right at the edge of the top ant’s antenna, and with a little encouragement, the stiff denim will fold over just enough to cover the collar seam. Still not being totally pleased with the collar, I continued on with the sewing process to the next steps.

But that’s a story for next time.

Until then, sew forth and ant on!

Oh! That’s Gonna Leave a Welt… – Part 2

DSCN0977Continuing on from my first part of the welt pocketed jacket project, the rest of the jacket sewing went smoothly.

I used pleather for the collar as well as the pockets and it all sewed up great! Because the zipper was not inserted into the collar, there was no hand stitching and I was able to finish off the collar with some twill tape. I also remembered to press the pleather with a press cloth on both the pockets and the collar so that the iron did not damage the pleather. Before long the sewing was done and the jacket was complete.

With the jacket completed, I studied it closely and something was not right.

DSCN0981I stared at and studied the jacket until I finally figured out what that something was. The neckline on this jacket is HUGE! It is way too big around. I returned to the pattern, but as far as I could tell, I had traced and cut the pattern pieces correctly. Had I sewed something wrong or was it the pattern? I had a few options to try and fix it. I could try to fix the neckline, but for a trial jacket, I was not willing to spend the time and energy on a fix, especially to find out that the fix didn’t work or made things worse. Disappointed, I thought about not embroidering on the jacket, but then decided that some kid somewhere would be willing to wear this jacket, and he or she would need something fun embroidered on it to distract from the huge neck line.

DSCN0922Picking an embroidery design for this jacket was not an easy task. Since I did not know who the final owner of this jacket would be, I tried to make it as unisex as possible, but each embroidery design I picked swayed the jacket to the feminine or masculine side. I looked and debated over many designs until I finally realized that I was wasting all my sewing and embroidery time picking out the design. I finally went back to one of my first choices and embroidered The Lady and The Tramp design on the jacket. The jacket is definitely for a girl now but I love the design on it.

DSCN0982I am still not happy with the collar on this jacket, but I am very pleased with the welt pockets, the pleather accents and the embroidery design.

Ultimately, I am happy with the end results of this jacket and hope that there is a young girl out there willing to wear this jacket even with the oversized collar. I am super excited about learning to make welt pockets and I cannot wait to start another project with welt pockets!

Until then, sew forth and welt on!

Oh! That’s Gonna Leave a Welt… – Part 1

DSCN0977I decided that is was time to try making welt pockets.

Welt pockets always look so nice and professional, plus I had something special I wanted to try for the welts. One day while shopping at Walmart, I saw a couple of bolts of patterned pleather and I knew right away that it would be perfect to make the welts for the welt pockets from. I quickly purchased some, and headed for my sewing room.

First, I needed a pattern. After looking through my pattern stash, I turned to my Kwik Sew books on the shelf.

Yes, there were jacket patterns with welt pockets and instructions in these books. I was super excited and ready to get started!

Next, I had to choose a fabric for the jacket. I had a bright yellow sweatshirt fleece hiding in the stash and debated if pleather and sweatshirt fleece would look good together. I finally decided that they would, especially for a first try of welt pockets. It was easy to pick out some left over scraps from one of my shirts for the body of the pockets.

DSCN0827DSCN0830And I decided to make a size 8 jacket because of the length of the zipper I had. I would need to lengthen the jacket a little to accommodate the zipper, but I didn’t think that would affect the wearing of the jacket.

The first step in making this jacket was to see if pleather would survive the washer and dryer.

It did! And beautifully I might add!

The next step was to see if my sewing machine would sew the pleather or if I was going to require a special foot, needle and thread for sewing the pleather. I did not. The pleather sewed beautifully with just my normal pressure foot, regulars thread and a new Schmit universal needle.

DSCN0833DSCN0836Wow! I had read horror stories on the internet about sewing with leather but I guess pleather is different, or maybe just these particular pieces. Regardless, I was excited!

With the pattern traced and the fabric cut, it was time to get sewing.

To sew the welt pockets, I started with some scraps to get an idea of what I was doing, then I moved on to the jacket.

DSCN0838DSCN0842I started by applying a pieces of interfacing with the sewing lines to the front of the jacket. Next, I taped the pleather in place and then O sewed around the lines.. I taped it because I did not want to scar the pleather with pins. Cutting was next and then pulling the pleather to the wrong side to form the hole for the pocket. Then I folded up the welt and sewed it in place, and then I attached the body of the pocket to the pleather and finally I sewed around the body of the pockets.

DSCN0848DSCN0844Soon enough, I had completed the two welt pockets. They are not perfect but they were fun to make and I really like the results especially with the pleather.

I debated about interfacing the pleather of the welt but I thought that the pleather was stiff enough to not need interfacing. As I inserted my hand into the pocket, past the welt, I wished that I had interfaced the welt and made it stiffer to withstand use over time.

I had pictured the welts as being bigger than they finished up being. Knowing now how to make welt pockets, I feel that I can make the welts in different sizes and styles the next time I make something with welt pockets.

Coming up next, the completing of the jacket.

Until then, sew forth and welt on!

Simplicity 2480 – The Jacket – Part 4

DSCN0984With the pockets now completed, it was finally time to stitch the jacket! The first step was to insert the zipper. Remembering the lessons that I had learned from inserting the zipper in the little girl’s peplum jacket, this zipper sewed in much easier. And I did not need to move the needle over to sew the zipper on like I did the last time. The only challenge I faced with this zipper was deciding just how long I wanted the zipper to be.

Did I want it to extend into the collar or stop just before the collar? DSCN0807

The pattern called for the zipper to be inserted into the collar, but If I stopped the zipper at the collar, I could attach the collar as I would the collar of a camp shirt, finishing it off with a little twill tape.

If I followed the pattern instead and inserted the zipper into the collar, some hand stitching would be required to finish the collar. Now, you know how much I just “love” hand stitching, so you can guess which plan I was leaning towards, but then I remembered that I was making this jacket to learn so I decided to follow the pattern and insert the zipper into the collar, and then do the required hand stitching. After sewing on the zipper and facings, I hand stitched the edge of the collar to the back of the jacket. This went a lot smoother than I expected it to. I think I did a pretty good job on the hand stitching and that it will hold up with wearing.

Now that it is done I am pleased with the results of how I attached the zipper, collar and facings. DSCN0737Before I started this pattern, I read some pattern reviews for this pattern on the internet and one of the things mentioned about this pattern was that the sleeves were extremely wide. I could see this as I traced the sleeve part of the pattern, so I decided, based on the size of my wrists, to grade 4 inches out of the the width of the sleeves starting at the wrist.

I think the wearer of this jacket will like the thinner sleeves and it saved on fabric. I inserted the elastic at the bottom of the sleeves as the pattern called for. I think that will also help with any extra blousing from the wide sleeves. DSCN0989I interfaced the facings and collar before sewing them on. I just grabbed the first interfacing that I pulled from the stash to use, but I wished later that I would have looked a little closer.

Now, with the interfacing applied and the jacket sewn up, the interfacing that I used is too heavy for the fleece. The heavy interfacing makes the collar stiff so that it only wants to stand up. The heavy interfacing is also a problem at the inseam pockets. Because I used two pieces of fleece to make the pockets, they are already bulky but when I added the heavily interfaced facing on top of the pockets at the bottom of the jacket by the zipper, it is even bulkier.

Lesson learned. DSCN0987

Upon completion, I stared at the jacket and it looked very odd to me. It looked like it would never fit anyone.

It’s was so small in circumference but long in length in both the sleeves and the body of the jacket. Who would have such odd body proportions. Then it dawned on me what I had done. I had made a extra small adult jacket, and not an extra large child’s jacket. Once I figured this out I could finally picture a young slender adult wearing this jacket without any problem. An unforeseen lesson in sizing and fit was learned this time around. Although this jacket may not be perfect, and some of the seams are not very straight, I am still pleased with the end results.

I learned a lot, and it has left me with several ideas and sewing techniques that I want to try and work on in the future. I hope some one will enjoy wearing this jacket and that it will fit them well.

Until next time, sew forth and jacket on!

Simplicity 2480 – Pocket #3 and #4 – Part 3

Version 4As mentioned in a previous post, I had already decided not to make the side in seam pockets with a zipper closure as the pattern had called for, so I set the pattern guide aside and thought up my own plan for sewing these pockets. Most of my ideas came from the in seam side pockets I had sewn in a little kid’s polar fleece jacket several years ago but with a few changes.

The pockets on the kid’s jacket were just one piece which was sewn to the front of the jacket to make the pocket. An open rectangle was sewn at the side seam for the opening of the pocket and then the pocket sewn to the front of the jacket to complete the pocket. The seam attaching the pocket to the jacket was seen on the front of the jacket.

DSCN0768The pattern I was currently working with called for these pockets to be make from two pieces so the pocket is not sewn to the front of the jacket. I liked the idea of not having a visible seam on the front of this jacket. So, to make the opening of the pocket, I placed one piece of the pocket on the front of the jacket, right sides together and sewed, cut and turned the rectangle for the opening. Next, I sewed the second pocket piece to the first pocket piece to complete the pocket.

DSCN0802 (1)The pattern called for the first piece of these pockets to be a lining fabric instead of using two pieces of the fleece. The reason for this was the bulk. It you were using a heavy polar fleece, two pieces would be very bulky, but I was not using polar fleece, my fabric was just a sweatshirt fleece, so I made both sides of these pockets with the same fabric. Two pieces of the fleece didn’t seem that bulky to begin with, but when it was added to a third piece, the front of the jacket, the pocket was then getting a little bulky. It was not so bulky that I was willing to unpick and restitch the pockets but the lesson was learned. Don’t double up fleece when making pockets with it!

With pockets #3 and #4 done now it was time to insert the zipper and finish up the jacket. That’s coming up next so stay tuned.

Until next time, sew forth and in-seam pocket on!

Simplicity 2480 – Pocket #2 – Part 2

Version 3I’ve sewn patch pockets before, so I did not pay much attention to the pattern guide as I sewed on the front patch pockets of this jacket, but when it came to the zippered front pocket, I read and studied the pattern guide throughly. When all was said and done, I wish I had not. Let me explain why.

Per the pattern guide instructions, I traced the cut lines for this zippered pocket onto a piece of interfacing and ironed it to the front of the jacket. Next, I cut on the cutting lines. The next step was to sew the shortened zipper to the small pieces that were made by the cutting lines. Because the pieces were very small, and the zipper was bulky and the fleece had stretch to it, this was not easy. It was difficult to sew a nice straight seam. I worked through it though and finally got the zipper sewn to the front of the jacket.

DSCN0753The next step was to sew the pocket to the zipper. Once again this proved to be a challenge. I had to sew the pocket to the zipper tape and the small cutting line pieces as I held the rest of the jacket out of the way and worked through the bulk and the stretch. My seams were not straight or even on this pocket but I finally finished it. The finished pocket is far from perfect, but it does not look too bad so I decided to call it done.

The reasons that I decided to call this pocket good enough for now was that I had no intentions of sewing another zippered pocket this way again. As I struggled to sew this pocket together, my thoughts drifted to what I had read about welt pockets. Wouldn’t it be easier to have sewn this pocket on like a welt pocket? Yes, I think so.

DSCN0756When I sew another zippered pocket, I will approach it as a welt pocket. I will sew the pocket to the front of the jacket, cut the cutting lines, and turn the pocket to the inside. This will give me a nice rectangle for the zipper. Instead of folding the pocket fabric into a welt at this point, the zipper will be top stitched to the rectangle, then the pocket fabric will be sewn together on the inside as if the welt had be formed and sewn in place.

DSCN0759I’m anxious to try the zippered welt pocket sewing plan that I have thought up to see it my ideas are valid. So, for about one second I did consider taking off the patch pocket and adding another zippered pocket instead. Then I remembered the liquid seam that I had used to finish the patch pocket and decided to leave the patch pocket alone and continue on with the rest of the jacket. My zippered welt pocket plan would have to wait for another project. And with that, it was time to sew pockets 3 and 4 to this jacket, the in seam side pockets. So, stay tuned to see how they turned out in the next post.

Until then, sew forth and zipper pocket on!