Tag Archive | safety

Silly Rabbit! Crocheting is for Long Car Trips!

DSCN2318What better way to whittle away the time of a long car trip than to work on a crochet project? Since I had a long car trip coming up, my next amigurumi project needed to be something that I could crochet in the car. This meant I needed a project that was larger in size than I normally do. A project who’s pieces could be crocheted now and stuffed later and wouldn’t need any stuffing during the crocheting process. A project with a simple count, not a lot of increases and decreases to keep count of or to loose count of when distracted. And, a project that was made from just a few colors so there would be less yarn to carry. After a bit of searching, I came across this bunny pattern. And since it seemed to meet all of my criteria for a car crocheting project, I was soon all packed up and ready to go!

DSCN2324As I crocheted the pieces of this amigurumi, it did meet the needed criteria. The pieces were coming out a nice size while crocheting with my favorite G size hook. The pieces did not need to be stuffed as I crocheted them which was nice. And except for the soles of the feet, and the increases in the head for the cheeks, the piece’s counts were even and it did not take a lot of concentration to keep the count correct. With just two colors needed, I only had to work with two skeins of yarn to crochet all the pieces. Plus, the opening of the head was large enough that I could complete the crocheting of the head and still get the safety eyes and nose put in later. This was truly a great car project!

DSCN2322Upon arriving home, it was easy to start the stuffing and the stitching together of this bunny. The pieces stuffed nicely, and soon I was pulling the button joints. Button joints are becoming one of my favorite ways to attach amigurumi project arms and legs. I did have one problem with pulling the button joints. Some how I got a knot in the stuffing or yarn as I was pulling the leg joints. It left a small dent in the bunny’s belly where it pulled. I tried to undo what I had done but I couldn’t. I tugged and pulled the bunny’s belly, trying to work the dent out but I had little luck with that. I finally decided to just leave the dent and to learn my lesson of being more careful as I pulled the yarn for future button joints.

DSCN2327When it came to the smile, I tried several different styles, including an open smile with a top and bottom lip using two strands of yarn but a simple line with a little curve was the best. I opted for a fluffy white pompom for the tail rather than the crocheted tail like the pattern called for and I also left off the belly spot that the pattern had. The bunny in the pattern had a crocheted purple spot on his belly. I crocheted the circle but when it came time to stitch it on, I did not like the look on my bunny, so my bunny does not have a belly spot.

DSCN2329A name for this bunny never came to me through the entire crocheting and stitching process, but the husband quickly named the finished bunny Trix because it reminded him of Trix the Rabbit from the cereal, so this bunny’s name is Trix.

He was very fun to make and he turned out just adorable in the end.

He also made a long car ride much more enjoyable. I don’t have another car trip planned for the near future but if I did I would probably make another one of these bunnies!

Until then, crochet forth and ride on!

Advertisements

Summer Buggin’, Had Me A Blast

DSCN2049I decided to follow my own advice and to continue with my “Just Do It” New Year’s resolution just with a smaller and less complicated amigurumi crochet pattern this time around.

Digging through my patterns, I picked these three bugs as my next patterns to make. I have had these patterns for a little while now and have always wanted to crochet them, but I had just never gotten around to it. These patterns definitely meet my New Year’s criteria but are definitely smaller and much less time consuming than the making of Arnold the turtle. And with that, these three bug-eyed bugs became my next amigurumi projects to make.

DSCN2056The first bug I made was the caterpillar. Even though I had read the pattern before I started, I had crocheted several of his pieces before I realized that I was only supposed to be crocheting in the back loop. While holding the pieces that I had crocheted together, the caterpillar looked like he was turning out just fine being crocheted in both loops, so I kept crocheting in both loops. After completing the crocheting and stuffing, it was a little odd to stitch one ball to the top and one ball to the side of the first ball, but it worked out fine. Once the stitching was done, I gave this caterpillar a big smile and with that he was done.

DSCN2055The second bug that I made was the mosquito. This time I did remember to crochet the pieces in the back loop only. The pattern called for just 4 legs though. Insects have six legs so I thought about making him two more legs, but since I was only giving this mosquito two body parts instead of the three he should have and technically would be stitching those 4 legs to the wrong body part, I decided to go ahead and just follow the pattern and only give my mosquito 4 legs and not worry about it being anatomically correct. At the end, it was a little odd stitching the mosquito’s eyes on. Unlike the caterpillar who’s eyes sit on the top of the head, the mosquito’s eyes were stitched to the side of the head. This meant that the safety eyes were attached at the top of the crocheted pieces instead of the side. Once the stitching was done, I gave this mosquito a smile and he too was done.

DSCN2050The ladybug was the final bug that I made. Once again, I had all six legs that the pattern called for crocheted before I remembered that I was supposed to be crocheting the pieces just in the back loop. Because the caterpillar had turned out just fine being crocheted in both loops, I kept on crocheting. The pattern called for all the spots and the ladybugs wings to be the same size, 6 single crochets in the magic ring. After looking at a couple of pictures of ladybugs, I decided that I wanted my spots to be different sizes. So, I made two spots as the pattern called for, two spots with 9 single crochets in the magic ring, and then two spots with 12 single crochets in the magic ring. I then stitched 1 of each size of spot to each wing with the largest spot at the bottom of the wing and the smallest spot at the top. Next the ladybug’s eyes were stitched to the top of the head like the caterpillar, making it easier to stitch them on, but it became a tight squeeze when stitching the antenna and wings to the ladybug. If I had crocheted in the back loops only, the ladybug would have been bigger and this would have made the stitching on of the antenna and wings easier, but in the end I completed the stitching and it all worked out just fine. Once again with the stitching done, I gave the ladybug a smile and she was done.

DSCN2053I wanted my bugs to stand on their own but this was not going to happen. The caterpillar is the most likely one that I made to stand on his own, and sometimes will with some squishing down. Because of the weight of the mosquito’s head and eyes though, his 4 legs will not balance him properly. I can squish him down and get him to stand for awhile, then he falls forward since he is so top heavy.

I am lucky I got the ladybug to stand long enough for the pictures for this post. Even though the ladybug’s legs are all the same size, by the time the legs were stitched around the body, the front and back legs are shorter than each other. I could have removed these legs and made them longer to solve this problem, but I decided not too.

DSCN2057So, between the heavy eyes and head and the uneven legs around the body, the ladybug is not great at standing. Maybe if I had crocheted in the back loop as the pattern said to, the body would be bigger and the legs would not be as curved around the body? This might have helped the ladybug to stand better and if I make this pattern again I will see if that is the case.

Even though the bugs will not readily stand on their own, they did all turn out to be very cute and they were fun to make, and I have a great time doing the crocheting and stitching them together.

I don’t know why I hesitated on crocheting these patterns for so long, but I would not hesitate to make all three bugs again.

Until then, crochet forth and bug on!

Hidden Button Joints on a Cool Cat

P1040187Since I have recently taken a fancy with button joints, I found this amigurumi cat pattern that called for the use of button joints but with a variation. Instead of showcasing the button and using large fancy expensive buttons to accent the amigurumi, these buttons are hidden inside the amigurumi, so you only need small flat inexpensive buttons to complete this amigurumi’s joints.

P1030778The construction of this cat started out with the crocheting of its parts. The crocheting was simple and fun. This cat pattern is similar to the monkey pattern I had previously made so I was familiar with how it was made. I stuffed the arms and legs as I crocheted them. The pattern called for the eyes and nose to be crocheted pieces and then the mouth would be embroidered to the head. Because the eyes and nose are crocheted pieces, I prefer to stitch them to the head after stuffing the head. Of course, if I was using safety eyes, I would have inserted them before stuffing the head. So, after stuffing the head, I placed the eyes and nose on the head to stitch them on P1030766and screamed in terror. This was the most scary face I have ever seen on an amigurumi before! I read the pattern again to make sure that I had made the eyes and nose correctly. And I studied the pictures that the pattern came with, but I could in no way get my cat’s face to be the adorable face on the cat in the pictures of the pattern. Not wanting to use this terrifying face, I turned to other amigurumi patterns for ideas. Remembering back to when I had first started making amigurumi’s and some of the techniques I had learned, I decided to embroidery the nose and mouth on to a piece of felt. I had purchased some P1030769safety cat eyes many years ago, knowing that some day I would make a cat and this was that day. So, I first unstuffed the head so that I could attach the safety eyes backs and then stitch the felt piece to the head. I dislike stuffing in the first place but to have to un-stuff only to have to re-stuff the head again was agonizing for me, but I could not finish this cat with it’s original horrifying face. I unstuffed the head, attached the eyes, stitched on the felt embroidered nose and mouth and then I re-stuffed the head. Now, with the head and cute face completed, I could continue on to the next part of this amigurumi, the hidden button joints.

P1030770The arms and legs were crocheted with two small patches at the top of each piece. When sewing the arms and legs on, one button was placed in between the patches and one button was placed inside the body. The buttons were lined up and stitched together through the one patch and the body. Then the two patches were stitched together to hide the button. The arms and legs can now rotate around the button joints. How fun is that?

P1040189And with a little more stuffing and stitching, this cat was finished. I think he turned out to be very cute and I really like the hidden button joints and the way they work. I was a little surprised by how expensive small buttons cost, and then the fact that you needed to use 8 buttons to complete this project really made the cost add up. I spent about the same amount on fancy buttons for the previous jointed teddy bears that I made previously as I did on the small buttons for this cat.

P1040194This was a fun variation to the button jointed amigurumi’s that I have made in the past and I really like the results. Stay tuned because in the next post, I’m going to show yet another way of making a jointed amigurumi. It should be fun!