Tag Archive | skull

WWWHHHAAATTT!?! – The Minions – Part 2

DSCN2582I had already spent the appropriate amount of time worrying about making this minion shirt so it was easy to get started on it.

I really wanted this shirt to sew together without any problems, so I decided to take my time and think things through carefully. So after laundering and ironing the fabric , it was time to start cutting.

I cut very carefully and added the alterations that I wanted to the pattern as I cut. I was quite selective about the interfacing I chose to use and I went ahead and cut it out too.

DSCN2584As I started to sew, I realized that I did make one cutting/design error, well not really an error, but a small change to the design. In my mind, the shirt had the minion fabric on the right and the blue on the left, but I had cut the left front from the minion fabric and the right front from the blue fabric. Mmmmmm, was this going to look ok? After much thought, I decided it would look fine, and maybe better because the buttons would be on the solid blue fabric instead of lost in the the minions fabric.

DSCN2581The sewing when smoothly. I took my time and tried the shirt on after each step. I also ironed each seam carefully as it was sewn. As I serged the edges of the sleeves, preparing them to be hemmed, I did not notice that I I was running out of thread on one of my loopers. Once the looper ran out of thread, my serged edge was ruined. Luckily, I had debated about cutting 1/2 inch off the length of the sleeves and had not done so yet. So, I cut the 1/2 inches off the length of the sleeves ridding me of the bad serged edge, threaded new spools of thread on my loopers and serged the new edges.

With the sewing on of the final button, I declared the shirt done and tried it on. The fit seemed to be good, but as I looked at myself in the mirror, the shirt needed to be something else. The right blue front was just that, blue. I grabbed some scraps and started adding to the blue front piece.

DSCN2493At first, I wanted to add a stripe of minion fabric down the blue front, but that was too much of an accent. I thought about digitizing a minion embroidery design. But since I was too excited about wearing the shirt, and it would take time to perfect the design and I wanted to wear the shirt now. My next thought was a pocket. This would not be a functioning pocket, just something for show, so it would not have to be any certain size or style. I decided to make a temporary pocket and see how it looked pinned on.

DSCN2496To make the pocket, I cut out two squares of fabric and then rounded the corner on one end. Next, with right sides together, I sewed completely around the two modified squares. Next, I made a small cut in the fabric that would be inside the pocket. I turned the pocket right side out through this slit. After a lot of pressing, with a little seam to seam, I mended the cut that I made in the pocket to turn it inside out. This worked well and I had a finished pocket. Since I will not be putting anything in this pocket, I am not worried about the seam to seam mending holding up with wear and tear.

Placing the pocket on the blue front, I liked it, then with another look, I did not, then after a few minutes, I liked it again.


DSCN2498I turned to the husband for his opinion and he said that he did like the pocket, so I sewed the pocket to the front of the shirt. I am still up in the air as to wether I like the pocket or not but it is sewn to the shirt for now.

The shirt has passed the “wear” test and I really like it. My alterations seem to be good. This shirt is fun to wear and is very comfortable.

It also makes me crave bananas for some reason…

Until next time, sew forth and banana on!


WWWHHHAAATTT!?! – The Skulls – Part 1

Despicable-me-minions-480x477Its what I want for Christmas. I told the husband that all I wanted for Christmas this year was a minion. Now, not one of those little ones from McDonald’s or a plush one, or even one of those plastic ones that talk. I wanted a really live, living, breathing minion. And, of course, I don’t want my minion to be lonely while I’m at work so I had better have a couple of minions. The husband said he would see what he could do but in the meanwhile I decided to satisfy my minion need with some minion fabric.

When I saw the minion fabric at Walmart, I knew that I just had to have it. I had absolutely no idea what I was going to make from it, but I just knew that I must have some. I purchased 1 yard and brought it home. The fabric sat on the cutting table while I debated what I wanted to make from it. I thought about all kinds of fun kid’s clothes that I could make from it, but instead I only wanted it for myself, so I decided to make myself a shirt from it.

Because let’s be honest here… Who doesn’t need a minion shirt?

DSCN2591Before I could cut into the minion fabric, I found myself fabric shopping again when I ran across this banana fabric. Seriously, it was bananas! BANANA! So of course, I needed some banana fabric to go with my minion fabric so I purchased one yard of the banana and headed home. Once I was home, I placed it next to the minion fabric on the cutting table. And I thought I was all ready to go. But, before I could cut into the minion fabric or the banana fabric, I found myself scoping out Walmart’s fabric department again, only to find a different minion fabric that I liked better for my shirt than the first minion piece, so one yard of this second minion fabric made it way to my cutting table as well.

DSCN2586Finally all set and before I could go fabric shopping again, I decided it was time to design and make my minion shirt. I quickly decided to make one front from the second minion fabric that I had picked up, the collar and sleeves from the banana fabric and then to find some blue in the stash for the other front side and the back. After laundering and ironing the fabric, I pulled my sloper pattern from the closet, only to remember that I was in the process of altering my basic sloper.


I did not want to cut into my precious minion and banana fabric with a pattern that needed it’s alterations tested.

DSCN2585So, I folded up my minion and banana fabric and pulled some fabric from the stash to test my alterations on. I like the colors of this fabric a lot but it has not become a shirt till now because it is very thin. I was skeptical of how it would wear being so thin, but I decided that since this was a test shirt, I would go ahead and use this fabric to give it a try.

So I cut out my altered pattern and I started to sew it up.

The sewing went smoothly. I was afraid that my machine would argue about sewing this thin fabric but all went well, and soon it was time to sew buttonholes and buttons. Sitting on the top of my button box was some sugar skull buttons that the husband got me awhile back when I needed skull buttons for the girl’s cross back tops. I laid the buttons out on the shirt. They did not really match but they looked fun, so why not. Again, this was just a test shirt.

DSCN2589Rather than picking out just one design of sugar skulls, I sorted through the pack of buttons and picked five different designs. When I sewed the buttons on, each button had its holes in a different spot. One button’s holes were vertical, one was horizontal, and the others were at a variety of angles. This presented a challenge to sew the buttons on straight. I had to measure and turn the fabric every which way to keep the skulls on the buttons right side up. Luckily with some patience and time, I got the buttons sewn on correctly.

DSCN2590I have had a chance to give this shirt a “wear test” and it passed just fine. There were a couple of small alterations that are needed to the armscye and button placement but I had solved the fitting problem at the neck from my last shirt made from this pattern.

But the good news is that I feel good enough about my alterations to my pattern to start the minion shirt as my next project.

Until then, sew forth and BANANA on!

Being Biased – Part 3 – Button Fitting

DSCN1300I believe I have fallen in love with bias tape.

Even though, I had a number of trial and tribulations in the making of and the sewing on of the bias tape with these tops, I can see were bias tape can be a fun accent to many sewing projects and I can’t wait to start another bias tape project.

But before I do that I needed to finish these cross back summer tops before the summer has ended so that the girls can actually get some use out of them.

All I needed to do to finish them was to add buttons and buttonholes to the back of the tops and they would be done and ready to wear.

Sounds easy enough, doesn’t it? Well, I wish would have been as easy as it sounded.

DSCN1303I knew when I cut this pattern out that this pattern does not have a true side seam. I did not think it was going to be a big deal, but it was!

The backs are cut so that the shoulder and side seams are towards the front of the top. There is no seam directly under the armscye or on the shoulder. It is just to the side of the armscye and front of the shoulder.

This pattern also has no indication of where the buttonholes should be placed. So, when it came time for me to determine where to sew the buttonholes and buttons, I had some guessing to do. DSCN1304

I started the guessing by trying to determine where the true side seam would have been on these tops. Should the back come towards the front of the top a little, like 1/2 inch, or a lot, like 2 inches.

Next, I had to determine if the cross over should match at the top and leave a big “V” at the bottom of the back or should the “V” of the cross over be smaller by lowering the top. I spent hours measuring, folding, pinning, and deciding where to put the buttons and buttonholes.

I would think that I had it all ready to sew, then I decided that it wasn’t right and I would start again. After awhile even the husband grew tired of me showing him each variation that I tried. He tried to help, but I just could not make up my mind if I had it right or not. DSCN1302

Finally, I reached a point were I truly believed that I had it measured, folded and pinned where I wanted the buttons to be so I went to the sewing machine. I carefully sewed the buttonholes and buttons in place on both tops.

When I was done, I was quite pleased with myself until I held the tops up and the back curve of the cross over flopped down over one of the special buttons I had paid a lot of money for. Crap! The buttons needed to be higher on the top.

Now, how was I going to fix this? Version 2

My first thought to solve this problem was to sew a hook and eye to the curve which would attach the curve to the back of the top. This would keep the curve from flopping over but that did not work. When the curve tried to flop over, you could see the hook and eye and it looked worse than the flopping curve of the fabric.

My next thought was to use some velcro. As I went to sew the velcro on, the husband asked what I was doing. I showed him the flopping curve and how I was trying to fix it. He said to stop. He said that since girls were sisters they could keep an eye on each other’s backs when they were wearing the tops and if the curve flopped, they could fold a crease in the bias tape so that the curve would not flop as much. This seemed like a reasonable solution to the flopping curve, so I left it at that.

20150530_124144The REAL answer to this whole problem was to have the girls try the tops on before I placed the buttons.

I could have quickly determined where the “side” and “shoulder” seams should be, how big the “V” in the back should be and where the buttons needed to be. But, I had wanted the tops to be a surprise for them so I didn’t. Even though they had picked out the fabric, they did not know what I was making from it. Plus, with them not knowing what or when I was making something, there was less pressure to get the tops completed.

With that all in mind, I determined that the surprise and less pressure to get the items completed were not worth the button/buttonhole headache, and with this lesson learned, the next time I make something for the girls, there will be fittings during the process. Version 2

Upon receiving the tops, their mom says the girls like them and will wear them. I explained to their mom the button/floppy curve issue and she said it would not be a problem.

I don’t believe that the girls were nearly as excited about these tops as they were their fun vests or their Dr Who bags, but that is ok because I learned a lot from these tops both in the sewing process itself and in the process of sewing for others. 20150530_124000

And the next time I sew for the girls, I am getting them involved in the process.

No more surprises!

I want them to pick their own fabrics, colors and styles. I want to measure them so that I have the best fit, instead of using a year old measurement that their mom took (no offense to their mom), and I want fittings and alterations done during the sewing process.

I think I will learn even more sewing for them this way and they will have exactly what they want as well. Plus NO more guessing!

Until then, sew forth and bias tape on!

Being Biased – Part 2 – The Sewing of the Bias Tape

DSCN1308I gave the process of sewing of the crossed back summer tops a lot of thought before I made the first seam.

I had read the pattern instructions, but I wanted to sew the top together with fitting in mind. I wanted to sew the seams so that the minimal amount of unpicking would be necessary if I needed to alter the size of the tops for the girls later. So, my plan was to start with sewing on the bias tape before sewing the shoulder seams or the side seams. After the bias tape was sewn on, I would sew the bias tape together with the shoulder and side seams as one single seam. That way if I had to alter the shoulder seams or the sides seams of the top, I only had to unpick a little bit of bias tape to get to the seams. This was a great plan until I thought about how I wanted to sew the bias tape on.

DSCN1298In deciding how I wanted to sew the bias tape on, did I want to sew the tape to the right side of the fabric and then fold it to the wrong side and stitch in the ditch on the front so that no seams were showing? Or, did I want to sew the tape to the wrong side and fold it to the right side and then stitch the tape with a decorated thread or stitch?

Since I was already mixing colors by using the pink bias tape on the purple top and visa versa, I choose the second option for sewing the bias tape on. So, my final sewing plan went as follows: I would sew the bias tape to the wrong side of the fabric and would then fold the tape to the right side after sewing the bias tape together with the shoulder and side seams. I would then top stitch the tape with the opposite color thread, i.e. sew the purple bias tape on with pink thread and visa versa. Sounds like a solid plan, right?

Well, this did not work as planned.

DSCN1295Because of how I had sewed the bias tape on, when I folded it to the right side the bias tape was needed to be sewed together opposite of the shoulder and side seams. If I had sewn the bias tape the other way that I had thought about doing it and folded it to the wrong side, my seams would have worked. But, instead of my plan working, I got to unpick several inches of each piece of the bias tape so that I could sew the bias tape together, then I could sew the shoulder and side seams together and then sew the bias tape back in place on the wrong side. Finally, I could fold the bias tape to the front and do the top stitching. All these little seams were flustering and extremely time consuming to sew and lets face it, not a lot of fun to do! But, I finally got it done and I had completed the sewing of the first top.

DSCN1306I wanted to sew the second top with the bias tape folding the same way as the first so I returned to the pattern’s instructions. I started by sewing the shoulder and side seams together first and then I sewed the bias tape on the wrong side of the top. Next I folded the tape to the right side and then top stitched the tape on. This went much faster and easier than the sewing of the first top had with no little seams to deal with. An with that the second tops sewing was complete.

I had four opportunities to learn the best way to start and stop the bias tape. I tried several ways but the way that folded and stitched the best for me was to leave a small piece of bias tape unstitched where I started. When I reached the end of the seam for the bias tape, I folded the ending piece of bias tape back on itself. I then laid the starting unstitched piece on top of the folded ending piece and then sewed this in place. When I folded the bias tape over, the starting pieces folded into the folded ending piece to make a finished start and stop of the bias tape.

DSCN1313The idea of sewing the bias tape to the wrong side of the top and then folding the bias tape to the front and top stitching in a contrasting thread sounded great, but in reality, sewing the bias tape on the right side and folding it to the back and stitching in the ditch with a matching thread would have hid a lot of sewing sins.

The top stitching looks good for the most part, but anywhere were my seams were not exactly straight, the contrasting thread announces the wavy seam LOUDLY. Also the starting and stopping of the seams don’t look that good. This is especially true where I was learning how I wanted to start and stop the bias tape.

DSCN1299The sewing of the tops would have been a lot easier and cleaner if I had sewn the bias tape the other way, sewn to right side and then folded to the back. I also could have followed my fitting plan. But, I had sewn the bias tape the other way and many lessons were learned, so it made the whole experience a good thing. Plus, the tops were looking good with the contrasting colors and threads. So, with the tops sewn, it was time to add on the buttons and buttonholes.

Join me next time to see how they turned out once they were completed!

Until then, sew forth and bias tape on!

Being Biased – Part 1 -The Making of the Bias Tape

IMG_1621My coworker’s tween girls are using and enjoying their Dr Who bags and it does my heart good for someone to enjoy and use something that I have made.

So much so, that it was easy to find another pattern to sew for them next. This time I made them a summer crossed back top from some sugar skull fabric that they picked out. I found this crossed back top pattern on line for free. It looked like a fun summer shirt, easy enough to sew and the right size for the girls.

I gave the girls their choice of a couple of fabrics that I had in the stash and they both picked the sugar skull fabric. I did not have enough sugar skull fabric to made both shirts so I planned to piece the tops with some black fabric from the stash.

Then I thought about it being summer. DSCN1296These were summer tops made to be worn in the heat of the summer months, so how could I make them from black fabric? So I dug through the stash and I found some nice pink and purple that would match the sugar skull fabric.

I decided to make one top from the pink and one from the purple so the girls would not have to match. I know that teens are image concious that way. The pattern is only two pieces, a front and a back, cut twice. Based on the girls measurements, I cut the front and back 1/4 inch wider and 1 inch longer than the pattern called for. The pattern also called for 3 yards of 1/2 inch double folded bias tape. I

f I had been making the tops with the black fabric, I would have bought the needed bias tape, but since I was using the pink and purple fabric, I decided to make the bias tape. 61NeRAwqLEL._SY450_Then I had the idea of using the pink bias tape on the purple shirt and the purple bias tape on the pink shirt to give them some great contrast, so I would definitely be making the bias tape myself. Plus, it would give me the opportunity to make bias tape again, and as you know practice makes perfect and I don’t use bias tape all that often.

Now, I thought I had the process down for making bias tape from the last time I made it for another project, but I was incorrect. I had a lot to learn and relearn while making this bias tape. I started out by cutting 1 inch strips on the bias. When it came time to sew the bias strips together, I knew that they needed to be sewn at a 90 degree angle, but I kept sewing the strips together backwards, one seam up and then one seam down. After much trial and error, I figured out that I needed to sew one strip on top, then the next strip on bottom to keep all the seams all on one side. 71f-MxnZmTL._SY450_

After getting all the bias strips sewn together correctly, I started to iron and shape them. I used my 1/2 bias tape maker and was making some beautiful bias tape, when I realized that my bias tape was only single fold.

What? Darn! I needed double folded bias tape!

So I folded my beautiful 1/2 single fold bias tape in half and got 1/4 inch double folded bias tape, half the size of what I needed. Crap! I seriously thought about just using the 1/4 inch double fold bias tape that I had made but I decided against it and started all over again.

This time, I cut 2 inch strips on the bias, sewing them together correctly as I had learned to do earlier, and I prepared to iron again, but not until I purchased a one inch bias tape maker.

Looking on Amazon for bias tape makers, I found two types, Singer brand made completely from metal, and several third party brands made of metal with a plastic insert.

Which was better? DSCN1310

After reading many reviews and pondering the question, the husband rolled his eyes and ordered me both the Singer and another brand with the plastic inserts. After trying both styles of bias tape maker, I decided to use the Singer metal ones. Even though both worked fine, I just liked the Singer ones better. They seem to fold the fabric more evenly and were easier to push the fabric into the maker when starting out.

After a fair amount of ironing, I had 4 yards of 1/2 inch double folded bias tape in both pink and purple, ready to sew on. I made 4 yards of each color rather than 3 yards like the pattern called for because I had increased the size of the tops slightly from what the pattern called for.

Now it was time to sew the bias tape on to the tops.

Stay tuned for the construction of the crossed back summer tops in my next post!

Until then, sew forth and bias tape on!

This is Halloween…


Happy Halloween Everyone!

Hopefully you enjoy this years Halloween/Day of the Dead Diorama that my husband creates for me every year from all of my crocheted Halloween Amigurumi creations! I sure do, and I think this years is the best yet!

October 31st, straddling the line between fall and winter, plenty and paucity, life and death, Halloween is a time of celebration and superstition. It is thought to have originated with the ancient Celtic festival of Samhain, when people would light bonfires and wear costumes to ward off roaming ghosts. In the eighth century, Pope Gregory III designated November 1 as a time to honor all saints and martyrs; the holiday, All Saints’ Day, incorporated some of the traditions of Samhain. The evening before was known as All Hallows’ Eve and later Halloween. Over time, Halloween evolved into a secular, community-based event characterized by child-friendly activities such as trick-or-treating. In a number of countries around the world, as the days grow shorter and the nights get colder, people continue to usher in the winter season with gatherings, costumes and sweet treats.

IMG_8549 - Version 5The Day of the Dead celebration (Día de los Muertos) is a Mexican holiday celebrated throughout Mexico and around the world in other cultures. The holiday focuses on gatherings of family and friends to pray for and remember friends and family members who have died. It is particularly celebrated in Mexico, where the day is a bank holiday. The celebration takes place on November 1 and 2, in connection with the Catholic holidays of All Saints’ Day and All Souls’ Day. Traditions connected with the holiday include making catrinas, building private altars honoring the deceased using sugar skulls, marigolds, and the favorite foods and beverages of the departed and visiting graves with these as gifts. They also leave possessions of the deceased.

The Hip Bone is Connected to the Leg Bone

Although Halloween 2011 is now just a collection of wonderful memories and good times for me, the skeleton I was making before Halloween is finally done. Even though I did not make him as a Halloween decoration, I did start him before October 1st. But, with some endurance and a few projects made in-between, I have finally completed him.


I bought this pattern off of the internet. I fell in love with the pattern the minute I saw it and it moved to the top of my to do list quickly. I knew it was not going to be a quick or easy project for me. I knew it was going to be one of those projects that I had to concentrate on while I was crocheting it, not watching TV or riding in the car. Although as I started to crochet the parts, I quickly fell into the rhythm of this pattern. Once I had crocheted one foot or one hand or a rib, the next one was much easier and much quicker to make. If I make a second skeleton, it will take me much less time, effort and worry. Actually, after completing the hands and feet, it was fun to see them come together and be so cute that I had no problem crocheting the last foot while watching TV.  My only complaint about the crocheting would be the small count of the rounds. Ten sc was a common count of the rounds and that is a tight area to work in especially when my hands were tired. At least he was made with a size G hook so I could keep a good grip on it. I am not a fan of crocheting with tiny hooks.


My biggest complaint about the construction of this skeleton is, and of course you have already guessed it because it is a reoccurring theme with me, the sewing together of the parts or in this case the bones. This is really what took the most time and it is totally my fault because I can not do this quickly or for a long time without a break. So, don’t let my problems discourage you from giving a pattern like this a try. I will say though that it was fun to see the skeleton come together as I stitched it. This does bring me to the only complaint I have about the pattern and that is that the author of the pattern needs to give more pictures of the construction stage of the skeleton. Other than that, the pattern was great and well written.


Although when I first saw this pattern I was afraid it would be too complicated for me, it turned out to be a lot of fun to crochet and, well, sew together. I am very pleased with the end results and would not hesitate to make a second one. So, the moral of this skeleton construction story is to not let a pattern that looks overly complicated at first glance discourage you from giving it a try.