Tag Archive | stuffing

Franklin

img_4823I laid the four “in progress” amigurumi’s that I’ve been working on for what seemed like forever, the sheep, the ferret, the momma dragon and the black panther, in front of me and tried to pick which one I should complete first.

img_4826As I studied the four projects, my first thought was “I think I’ll start the unicorn pattern I just found on line.” I then had to scold myself and say “NO!” I could not start another amigurumi until I finish these four that I had already started. Of the four, the black panther interested me the most. The panther was a bit of a challenge and was for a friend so he already had a good home to go to, so I got started working again on the panther.

img_4829When my friend had picked a black panther as her favorite animal, I panicked for three reasons. One, I had never seen a pattern for a black panther before. After calming myself down and thinking it through, my first step was to find a pattern. After a few web searches and no luck finding a pattern for a black panther, I altered my search, and started to look for tiger patterns that I could crochet in black. I found several tiger patterns that I liked, but when I found this adorable tiger pattern, I quickly picked it as my black panther pattern.

img_4828The second reason I panicked was the color of a black panther. Obviously, the main color of the panther would be black but how was I going to accent black safety eyes on a black animal so they could be seen? What color should I make the nose and smile so that they didn’t just blend into the face? How about the ears? Was a solid black animal going to look good or would it look like a big black blob? After much thought and looking at many pictures of black panthers, I decided to give the panther yellow eyes, a gray muzzle and accent his ears with some gray yarn. I debated about giving the panther gray paws but I decided to keep them black.

img_4835The last reason for my panic was the fact that this whole amigurumi would be crocheted in black yarn except for the small gray pieces. I have a difficult time crocheting with black yarn. The older I get, the harder it is for me to see the black stitches. This meant that I would have to take my time crocheting this panther and watch my stitches closely, plus I would need to always work in the best light.

Except for working with black yarn, the pieces of the panther crocheted smoothly. Then it was time to stuff the pieces. It is always a bit of a challenge to stuffing dark color pieces with white poly-fil. It takes some time and patience to stuff the pieces firmly but to take care and not stretch the stitches too much revealing the white stuffing underneath.

img_4837Stitching the black pieces together also presented a challenge in both working the black color yarn and having the white stuffing pull through with the stitches. I had to use tweezers to pull single strands of stuffing from the stitches. This was time consuming but necessary. These single strands of stuffing made the panther look messy where he was stitched together.

img_4838This pattern called for the arms and legs to be crocheted so a thread or button joint could be done to attach them, but then the pattern called for the arms and legs to just be stitched on. I debated about doing a thread joint instead of just stitching them on but then decided to follow the pattern. Once the arms and legs were stitched on, they seemed secure and allowed the panther to sit, so I was happy with the results of just stitching them on instead of using a thread joint to attach them.

img_4830Once the panther was stitched together, it was easy to give him a big black smile on his gray muzzle. His name, Franklin, was the first and only name that came to me as he sat in the chair next to me, waiting to go to his new home. During the construction process, I became very fond of Franklin and almost did not give him to my friend, but I had made the black panther just for her and he needed a good home. When I presented Franklin to my friend, she was so surprised and also fell in love with him right away. I know she will give Franklin a good home.

img_4844With Franklin, the black panther, done, which “in progress” amigurumi would be next on the to do list? Stay tuned to find out.

Until then, crochet forth and black panther on!

Oh! I Want To Make That! Now!

124025535d79d799e41221839803134bThis summer I have suffered from a severe case of “Start”itis.

By definition, Startitis is a condition caused by seeing a new amigurumi crochet pattern and needing to make it NOW despite the fact that the last amigurumi project isn’t even close to being completed.

It is the process of abandoning the current amigurumi project that was being worked on previously, and leaving it as a UFO (unfinished object) to start yet another amigurumi project with the broken promises of later returning to that deserted project as soon as the new one is done, and before yet another new one is started.

My case of Startitis has been quite severe and it is going to take some time to get over at this point.

img_5668At the first of the summer, I found the cutest little lamb pattern. I have seen several cute lamb patterns over the years but I had passed on making them because of the challenge of crocheting the lamb’s wool. When I saw this lamb pattern, I was ready to accept img_5689the challenge, and started to crochet the pieces for this lamb. After crocheting the body with popcorn stitches, I needed a break from this project.

The popcorn stitches took a lot of time and concentration to crochet and keep count and I was feeling lazy. This was not a “watch tv” and still crochet project. I tried to crochet the other parts of the lamb that did not have popcorn stitches like the arms and legs, but the thought of the up coming parts with popcorn stitches just made me completely lose interest. I was determined though to see the lamb project through to completion until I spied an amigurumi pattern that I just had to make IMMEDIATELY!

Yes of course, you guessed it!

img_5687It was a ferret in a sweater!

I mean come on, EVERYONE NEEDS one of those don’t they? Boy, I sure thought that I did!

It was love at first sight when I first saw this ferret pattern and it was simple to put down the cream colored yarn of the lamb and pick up the dark brown yarn of the ferret and start on yet another new project. The ferret’s pieces crocheted easily, and I loved adding the little sweater to his body. I crocheted his head and the cut and tied yarn color changed for his little bandit face but then I promptly put my hook down. The problem was, I just saw the cutest momma and baby dragon patterns and I just had to make them both. NOW!

img_5695Since it was so easy to stop working on the lamb project, and start the ferret project, I had no problem at all in deserting the ferret project to start to crochet the dragons instead. I picked out burgundy and gold for the momma dragon and two shades of purple for the baby dragon and then I started crocheting on the momma dragon’s body right away!

Because I was in such a hurry to start the dragons, I didn’t take the time to read through the pattern first so I was surprised as I crocheted the momma dragon’s body just how big she was going to be, but since the body was turning out really cute I had no problem continuing to crochet on it. I finished the momma dragons body and then I started crocheting the next pieces until I was presented with a new challenge.

Yes, you again guessed correctly. I just had to make a black panther!

img_5693You see, while I was visiting with an old friend, I decided to make her an amigurumi and asked her what her favorite animal was. I was expecting her to say a dog, a cat, a mouse, a cow, a pig, a monkey, or, could I be lucky enough, a lamb, a ferret or a momma dragon, but her response was a black panther instead.

As soon as she named a black panther, I lost total interest in making her an amigurumi for two reasons. One, I have never seen a pattern for a black panther and two, I can’t see black yarn very well so it is more difficult to crochet with than other colors. Crocheting an entire amigurumi from black yarn and getting something that resembled a panther out of it was just too much for my little brain at the time.

But, as time when on and I thought more about it, my little brain started to design a black panther for my friend. This challenge intrigued me so I stopped working on the momma dragon to get the panther started.

img_5699After crocheting a few pieces of the panther, I put my hook down. Luckily, not to start yet another amigurumi project but to evaluate what I had been doing. So far I had a bag of cream and beige yarn and pieces of a little lamb, a bag with the cute ferret’s pieces ready to be stitched together, a bag with a big momma dragon’s body, and now a bag with black panther’s pieces in it.

tumblr_nrsok0hg571uawe7no1_1280I decided that I really had to stop this and focus on one project, complete it and move on. These were all projects that I wanted to finish, but I had let new pattern after new pattern get in the way. I could not allow myself to start a new amigurumi project again until I had completed these four that were already started.

So, my new amigurumi project was to pick one of these four current project and compete it. This was a great goal until I realized Halloween is in just six weeks.

Oh crap!

I had wanted to make more candy filled ghosts and spiders for Halloween this year. Now, what do I do? Do I abandon the little lamb, the cute ferret, the momma dragon and now the black panther to start on Halloween projects before it is too late? Stay tuned to see what I decided next time!

Until then, crochet forth and start yet another project before you finish the previous one on!

A Snake In The Grass

IMG_4459I have been eyeing this snake pattern for a long time. It looked like a quick, but fun project. So, when it was time to pick another amigurumi project, this snake popped to the top of my to do list.

IMG_4463As I dug through the yarn stash looking for just the right colors for the snake’s body and stripes, I found four colors that I really liked together that would work great for the snake’s body, but I only needed three colors to make the pattern. But which three colors should I pick? Undecided, I asked the husband which three colors he thought would look best for the snake’s body and stripes. He said I should use all four colors. After a long pause to see it in my minds eye, I decided that yes I could use all four colors. I would subtract one round for the color that was used the most in the snake’s stripe and replace that round with the fourth color. With the colors planned out, it was time to start crocheting.

IMG_4466The crocheting of the snake’s body started with the tail. I crocheted the tip of the tail and then the first 3 color stripe. It looked great. Since it was not too many rounds until the next stripe, I decided to carry the 3 yarns of the stripe as I crocheted. After the third stripe, though, I noticed that the 4 yarns that I was carrying instead of cutting and tying off with each color change, were getting very twisted and hard to manage.

Maybe I should be cutting and tying each color change to prevent this twisting mess?

IMG_4338But, I knew it would not be easy to cut and tie each color change in a 10 single crochet round, especially with the number of color changes this snake’s body had. So, I had to decide which I wanted to do, take the time to untwist the 4 carried yarns as I crocheted or cut and tie off each color change. I decided to carry and untwist the yarn as I crocheted.

IMG_4336It wasn’t difficult to untwist the yarn as I crocheted, but it was time consuming. I still think it was less time consuming and trouble to carry and untwist the yarns than to cut and tie each of the color changes. Once I had completed the ninth stripe of the snakes body, I really liked the results and I was very pleased that I took the time and effort to use the extra color. I crocheted the snake’s head next, and soon I had the two pieces of the snake crocheted up and ready to stitch together.

IMG_4461The pattern said to stuff only the snake’s upper body and his head which I did. I then stitched the head and body together. The next step was the tricky step. I had to twist the snake’s body tightly enough so that it supported the snake’s head and made the snake stand upright like a cobra. After several twisting attempts and some fiddling and fussing, I got the snakes body twisted and his head positioned just right. I grabbed my pins and pinned everything in place. Then, with some small unseen stitches, I tacked the twists and head in place.

IMG_4465After some thought, this snake was named Snape.

Snape is very cute and definitely would not scary anyone as he slithers through the grass. He was a fun project but not quite as quick of a project as I thought it would be. I do hope to make more snakes some day as they were a lot of fun!

Until then, crochet forth and slither and twist on!

Hamlet

IMG_4435IMG_4439To be or not to be. That is the bacon I ask from thee.

It was the big eyes, of course, that I fell in love with, and that made the decision to make this pig my next amigurumi project easy.

I started this project by digging through the yarn stash to find just the right color of pink for this pig. I found a small skien of pink yarn that was the perfect color, but would it be enough to complete this pig? Hhhhmmmm. I decided to go ahead and go for it. If there wasn’t enough yarn, I might have to get creative with the colors later.

IMG_4437IMG_4442I knew that if I was going to have to match pink yarn colors later in this project, I would want this pig’s body to be all the same color so I started the crocheting of the pieces with the body first. After finishing the body, I knew the next part I wanted to match colors was the snout, so I crocheted it next, and that was followed by the ears.

By this time, my skein of pink yarn was getting pretty thin, but I crocheted on. The legs were next to be crocheted. Luckily, there was not too much pink yarn used to crochet the legs. After finishing the legs, I was down to a very tiny ball of pink yarn with only the pigs tail left to crochet.

IMG_3895IMG_3890I decided to hold off on crocheting the tail until after I had stitched to pig together, just in case I needed the remaining pink yarn in the stitching process. So, after crocheting the eyes, pupils and nostrils, I got started stitching the pig together.

The stitching together of this pig was a slow process with lots of stuffing involved. Luckily as I stitched the pig together, I did not need any of the extra pink yarn for the stitching. This left me with enough pink yarn from the original skein to make the pig’s tail. After crocheting the tail and stitching it on, the pig was complete.

IMG_4454IMG_3887It was very easy for me to pick a name for this pig. He was named Hamlet early on in the stitching process. As expected, Hamlet is very cute and I love his big eyes. He is now waiting for a good home, preferably with someone who is not hungry for bacon.

Until then, crochet forth and bacon on!

Derek The Dimetrodon

Do you remember yarn dye lots? If you do, you might be as old as a dinosaur! (Pun Intended)IMG_3391

But, seriously, I remember the phrase “and make sure it is the same dye lot” from my childhood. Every time I was sent to the store to buy yarn for my mother or grandmother this phase was spoken to me, and I took it seriously and made sure to purchase the same dye lots if I could.

I remember the matching issues my mother and grandmother faced when they ran out of a color of yarn of a specific dye lot in the middle of a project. It was a real problem back in the day, and it took a lot of thought in designing and matching yarns to complete a project when they ran out of a color of a specific dye lot.

IMG_3906For my younger readers, let me quickly explain what a dye lot is. 15 years or so ago yarn manufacturers would dye or color a specific batch of yarn in a specific factory and they would give that batch a specific dye lot number indicating that all those skeins were dyed together and so the color variations would be little to nonexistent.

The next batch they made in that color would have a different dye lot number, and although they would dye with the same dye formula, there might be a slightly different coloration of the yarn depending on how the yarn took the dye. The batches would basically be using the same color but the yarns color would come out different enough that if used in the same project you could see the differences.

IMG_3904Today, because of more modern manufacturing processes, the manufacturers of yarn have the yarn color dyeing process more perfected and so there is really no need to give each color batch a lot number. Because of that, the variations in todays dyed batches of yarn colors is not really noticeable when making something and skeins from different batches are used in the same project.

So, today when you purchase a skein of Red Heart “Buff” brown yarn on Monday and another skein from a different store on Monday five years from now, you don’t have to worry about when these skeins were dyed or if they can be used in the same project. They can. Unless you are using very old yarn that still has dye lots listed on the labels anyway.
IMG_3403

So, what does all this have to do with my latest amigurumi project, Derek the dimetrodon? You see, when I started to crochet the pieces for Derek, rather than digging through my box of green yarn for a new skein of Red Heart Spring Green, I simple grabbed the remainder of a skein from my yarn basket and got crocheting.

I was able to crochet all of Derek’s pieces with this partial skein except for one foot.

No problem. Since there should not be a worry about dye lots, I simply went to my box of green yarn, pulled out another skein of Spring Green and crocheted the last foot.
IMG_3392But as I started to sew Derek’s pieces together, I noticed right away that the fourth leg from the new skein was smaller in size than the other legs.

Had I possibly pulled my tensions tighter as I crocheted the last leg? I decided to crochet another leg and see what size it turned out.

Upon completing the leg, it measured the same size as the 4th leg I had crocheted from the same skein of yarn. So, even though I did not have to worry about the color of the yarn, i.e. the dye lot, the yarn from the two skeins were different somehow and they were crocheting differently.

DSCN4302That is very Interesting I thought to myself. I guess that in using some older yarn and some newer yarn together in the same project together they had been manufactured in slightly different widths or perhaps a slightly tighter twist? I guess that is another question to figure out at a later time. In any case I will do some testing on a few future projects to find out what went wrong.

DSCN4304Luckily, this was a quick fix that did not take a lot of thought or redesigning or matching. I simply used the two smaller legs as the front legs and the two larger legs as the hind legs.

Once all the legs were sewn to the body, it was hard to see the different sizes. Unfortunately, I now have one extra leg from this project. Does anyone out there need a spare dimetrodon leg? If so I have one!

In the end Derek the dimetrodon turned out very cute, even with his smaller front legs. Derek is now looking for a good home and a good friend to play with him!

Until then, crochet forth and dye lot on!

Rocket the Raccoon

DSCN4107What happened to Red Hearts light gray yarn? It just seemed to disappear from store shelves all of a sudden!

The colors for my latest amigurumi project, Rocket the raccoon, were simple, light gray, dark gray, a touch of white and a touch of black. But, when I went to pull the light gray yarn from the yarn stash, I was shocked and amazed by what I saw.

Upon looking in my gray yarn stash box, I found several skeins of dark gray yarn, medium gray yarn, speckled gray yarn, variegated gray yarn but only one skein of light gray yarn.

DSCN4111As I pulled the light gray skien of yarn from the box, I made a mental note to purchase more light gray yarn the next time yarn was on sale at Joann’s. But, as I held my last skein of light gray yarn in my hands, I was shocked by what I saw on it! A Walmart clearance sticker right on top of the Red Heart Brand Label!

Was Red Heart no longer going to make light gray yarn? No, that couldn’t be! Certainly Red Heart would not discontinue making a basic color like light gray. Maybe light gray was just not a popular enough color for Walmart to continue to carry? Maybe, but how could light gray be an unpopular color?

DSCN4109For my amigurumi making, light gray is essential, elephants, mice, raccoons, baby penguins and so on. Spooked just a little by these thoughts, I put the skien of light gray yarn down, and picked up a skein of medium gray Red Heart Love yarn that I purchased last month and a black skein of yarn for the main colors for my raccoon.

As I crocheted the pieces of this amigurumi, I simply used the medium gray yarn instead of the light gray yarn and black yarn instead of the dark gray yarn that the pattern had called for. All the pieces were crocheting up nicely until it came to the eyes. As I crocheted the eye patches from the the black yarn, I quickly determined that my black safety eyes would be lost in the patch of black yarn. So I picked out some blue, green and yellow eyes from my bag of eyes but I just did not like the look of these colors, so I decided to add a white patch of felt behind the black safety eyes to separate the eyes from the black eye patches.

DSCN4114That worked out too well! The bright white between the black eye and the black patch made the raccoon look like he was staring into headlights, so I picked a cream color felt instead of the white felt to tone down the contrast and that worked out fine.

As I attached the eyes to the head, I ran into another issue. By the time I put the eye stem through the felt, the black patch and the head, there was no stem left to attach the safety back to. So, I decided to only attach the eyes to the felt and eye patch and I left the stitching on of the patch be how the eyes are permanently attached to the head. This worked out great!

DSCN4113I also changed from white yarn to cream yarn for the muzzle and the accent around the ears. The cream colored yarn blended better with the medium gray and black yarn and matched the cream felt of the eyes.

It took some time to stitch Rocket together. His legs are attached by thread joints but his arms are just stitched on. And I ended up trying several different smiles both on and off the muzzle for Rocket. I even considered leaving him without a smile but finally decided on the tiny black smile on his muzzle.

Rocket turned out to be a very cute raccoon even in the darker colors. I am pleased with the end results. It is now time for Rocket to find a good home and someone to play with.

Until then, crochet forth and gray on!

Marty The Zebra

DSCN3937It was his cute cartoonish style that made me pick this zebra pattern as my next amigurumi project. I liked his big head and his fat stubby hind legs that lets him sit. What I didn’t like was that the pattern only called for the zebra stripes on his body, not on his head or legs but that was ok. I could fix that!

DSCN3940Anxious to get crocheting, I grabbed the black and white Red Heart Love yarn I had purchased at Walmart’s Black Friday sale last year and I got started! I noticed right away that the Love yarn was much softer and the fibers liked to separate more while crocheting than the Red Heart Super Saver yarn, so I had to be careful where I inserted my hook and I needed to watch my tensions more closely as I crocheted.

I crocheted the body first. The body was not crocheted in continuous rounds. A slip stitch and chain were done at the end and start of each round to help keep the stripes even. Each stripe consisted of two rounds, so rather than than cutting and tying the yarn every other round, I carried the yarn. The tension of the carried yarn was not a problem because it was being carried over a very small space. It was cumbersome to have two skeins of yarn, twisting, as I crocheted though.

DSCN3936I crocheted the front and hind legs next. As mentioned, the pattern called for no stripes on these pieces. I wanted stripes so I started with solid black for the hooves and then made stripes, two rounds thick and then I alternated the colors. I crocheted in continuous rounds rather than slip stitching and chaining since it was only a couple of stripes and the color changes would be hidden under the legs. I also carried the yarn as I did with the body.

DSCN3942The head was the next piece to be crocheted and once again the pattern called for it to be unstriped, but I was going to stripe it. I crocheted the mouth in black then started the stripes. I crocheted the stripes exactly like the legs, in continuous rounds, two rounds thick, carrying the yarn as I crocheted. Like the legs, I could hide the color changes of the stripes on the bottom of the head.

The tail was the only piece that I did not stripe. I crocheted it white and then attached a few black pieces of yarn to the end.

DSCN3917The challenge for this amigurumi came when I stitched the head and body together. When I attached the head to the body, the zebra was staring at the ceiling, so I needed to move the head down. After a lot of pinning, stitching and unstitching, I got the head attached to the body without the zebra looking up. The legs and tail were much easier to stitch on.

DSCN3926The mane for this zebra was fun to attach. I did not quite follow the patterns instructions of making the mane. I knew how I wanted it to look, so I started by cutting 5 inch pieces of black and white yarn. Starting at the center of the head, I attached 2 rows of 3 white yarns. I then attached 2 rows of 3 black yarns and alternated this pattern down the back of the head. When I was done, the husband helped me trim the mane by hand and it was done. I was concerned about making the mane from the Love yarn because of how much it likes to separate. It will not take much play before the mane’s yarns will be untwisted and fuzzing, but that might be a fun look for the mane.

DSCN3921I picked some fun cartoon eyes for this zebra that I attached while crocheting the head. I wanted this zebra to have a big smile but I was having trouble getting the curves that I wanted for the smile while stitching on the mouth. To get the smile I wanted, I decided to glue on the mouth instead. I placed the yarn where I wanted it to be, then rolled the yarn down, applied a line of glue and then rolled the yarn back into place on top of the glue. This worked well and gave me the smile I wanted.

After some brainstorming with the husband, we picked the name Marty for this zebra. Marty is very cute. He makes me smile when I look at him. I like his extra stripes. Soon, Marty will have a new home and I hope he will be loved and played with often.

Until then, crochet forth and stripe on!