Tag Archive | wing

Harriet The Big Dragon

After finishing Franklin the black panther, I picked up the momma dragon pieces and decided to make it my next “in process” amigurumi to complete.

I started the crocheting of the pieces for this dragon with the legs. After crocheting the legs and attaching them together, I started crocheting the body. I kept crocheting and crocheting and crocheting. Was this body ever going to end? Was the body alone going to take a whole skein of yarn?

I had crocheted about half of the body when I decided I had better start stuffing the body before I could no longer reach the legs. So, I started stuffing, and I kept stuffing and stuffing, and stuffing. Was I going to use a whole bag of stuffing to stuff the body of this dragon? Even with stuffing the body relatively flat in shape, I was still using a lot of stuffing.

A little flustered by the crocheting and the stuffing of the legs and body, I stopped working on them and crocheted and stuffed the arms, hoping that a break from the body would help me feel better about finishing it when I started working on it again. It did not. I felt like I was never going to finish the body. By the time I finally got the legs and body of this dragon done, I had grown very weary of crocheting this dragon.

And so I put this amigurumi aside and started another one.

Now, the time had come to finish this amigurumi. After all the crocheting I had done to complete the legs and body, it was easy to crochet and stuff the rest of the pieces for this dragon. Assembly of this dragon went smoothly but took extra time due to all the little pieces the dragon had to have stitched on, like the horns, spikes, tail, body spot, ears and wings. I believe the assembly went so smoothly because the the majority of the stuffing was already done and it was fun to see the dragon develop as the the extra pieces were added.

Once the dragon was completed, I fell in love with her. The long slender body was complimented by the small size of the spikes, wings and horns. The combination just looked so cute. This large dragon was not named until the completion of the baby dragon but that is a story for the next post. Stay tuned to read that story.

Until then, crochet forth and big momma dragon on!

Take Off That Hat And Scarf! It’s Still Summertime out there!

DSCN0243I must have been trying to think of cool thoughts while enduring the heat of the summer when I decided that my next amigurumi project would be a penguin.

Actually, a more accurate reason for choosing it was the purchase of a particular color of variegated yarn. I love the extremes of it. First a bright neon color then the complete opposite, black, then the bright neon color again. What would show off the burst of colors in this P1040325yarn? Of course, an animal with the same contrast, a black and white penguin.

I found the cutest penguin pattern and it included instructions to make a hat and scarf too. The crocheting of the pieces went smoothly, and the pattern was very well written with lots of detailed pictures. The only change that I made to the pattern was the penguin’s white belly spot. The pattern called for just a round white circle for the belly spot, but that looked odd to me. So, I undid the last round and added some double crochets to what would be the top of the spot, making it an oval at the top and round at the bottom. This looked better to me than just the round circle did. The oval top seemed to fill the belly area of the body better.

P1040335Stuffing and stitching the pieces together went smoothly as well. Soon enough, I had an adorable penguin all crocheted up! I actually thought about stopping there, but the whole reason for making this amigurumi was to use the new variegated yarn, so I started crocheting again to make the scarf and hat.

The scarf was no problem to crochet and it was a good length after being tied around the penguin’s neck. The hat was also a simple crochet to make. There is one thing I thought about changing on the hat and that was the color of the last round of the cap. The last round is crocheted in double crochet versus the single crochets of the rest of the cap, to give the cap a finished edge. This edge is lost when made in the variegated yarn. I thought about undoing the double crochet round and chaining the color to black. But I figured that would that just make the double crochets blend with the penguin’s black head and I would lose the edge anyway. In the end, I decided to leave the double crochet round in the variegated yarn, mostly because I love this variegated yarn on the black and white penguin.

DSCN0241The challenge for this amigurumi came with the pompom on the hat. I know how to make a pompom, but I have never had any luck making a successful one. They always fall apart on me. I thought about leaving the pompom off the hat but I really wanted one so I got started on it. After trying a couple of times to make the pompom and having it fall apart on me, I was ready to quit. So after filling the bottom of the garbage can with failed pompoms, I decided that the hat did not need a pompom after all. I showed the husband the completed penguin with the pompomless hat and scarf and his first comment was “Where’s the pompom?” Flustered I showed him the garbage can and explained to him how I had been trying to make the pompoms with no success. He said to let him try. I watched closely as he did the exact same thing that I had done to make a pompom, DSCN0247but when he pulled the yarn to tie the knot, he pulled it so much tighter than I could have had pulled it, I found my problem. The husband’s pompom was a success and I promptly stitched it to the top of the hat for the penguin. It looks great and best of all it did not fall apart. Unfortunately for the husband, he is now the official pompom maker.

This penguin was quickly named Paulie, not a very original name, but a good name. I think Paulie is very cute and was fun to make and I love his hat and scarf from the variegated yarn the most.

Until next time, crochet forth and crochet on.

Buzzing for Spring

happyspring2014-2Hurray for spring! Hurray for the return of warmer weather! Hurray for the return of the bunnies, the birds and the bees! Hurray for the green plants and flowers blooming! As spring emerges, I have watched the lavender plants in my yard bloom their beautiful purple flowers and watched the bees dance around as they do their job of pollinating them. All of these hard working bees got me thinking about all the fun free bee crochet patterns I had ran across over the winter and in that thought, my next crocheting project was chosen, a spring display of bees.

.

P1040174The first bee pattern I wanted to make was found on the blog, http://kristenscrochet.blogspot.com. He is a fat little bee with stuffed wings. I started by picking out which colors to use which does not sound like a difficult task since the only colors that I needed for the bee where yellow, black and white. Of course, black and white were easy enough to pick out but I went through my entire yarn stash trying to find a bee colored yellow, not a bright yellow but then again not quite gold either. I could not find the color of yellow that I wanted in my entire stash. I had either bright yellows or golds. After debating for quite some time, I finally picked the bright yellow that I had.

The pieces of this bee P1040173crocheted up easily and the sewing went quickly with only the wings left to stitch on. When this bee was finished, the husband said he needed some antenna’s. So, looking at the next bee pattern that I was getting ready to start on, I copied the antenna from that pattern and attached them to this bee. The husband was right. The antenna’s were the finishing touch for this bee. The husband promptly named this bee Air Bee One after the big fat Boeing 747 that the president flies around in called Air Force One.

.

P1040164The next bee pattern was found on a skein of Red Heart yarn. It can also be found on ravelry.com. Since the three colors of yarns were out and all ready to go, the crocheting started right away. The pieces of this bee were fun to crochet. The stitching together of this bee was a little more complicated than the last bee because of the six legs. Each leg had two yarns to attach it to the body with. At first I tried to stitch each yarn into the body, tie a knot in the single strand and then hide the knot. This was a lot of work and it had poor results. The arms were just not secure enough on the body. I tried a couple of things to secure the arms but I finally found that if I stitched the two yarns ends into the body, knotted them behind the arm and then hid the ends that I got a secure arm and the knot at the base of the arm was not even noticeable. This worked so well that I went back and reattached Air Bee One’s antenna this way too. This bee turned out very cute and was named Red after his pattern.

IMG_0004Bee number three’s pattern was found on ravelry.com. The pattern is called Bumble Bee Buddy by Ham and Eggs. After making the first two bees, the pieces for this bee crocheted up just as quickly. As I was crocheting the head, it was easy to see that this guy’s head was huge compare to his body. At first I thought it was just too big and it needed to be made smaller, but then I decided that no, it was fine, and that was what made this bee different from the last bees. The pattern only called for two legs and no antennas. This made this bee look incomplete to me, so I made him four more legs and some antenna’s and attached them like I did Red’s arms and antenna. Because the pattern called for the legs to be stitched making a picot at the end, I did the same for the antenna so they would match. And with this bee finished, he was named Hammy.

.

P1040154I had planned to make a couple of more bee patterns that I had found online but when I found the pattern for the queen and worker bees at http://kimlapsley.blogspot.com, the other patterns got pushed to the side. Unfortunately, unlike the other bee patterns so far, the pattern for these bees was not as simple or easy. These bees were very detailed and had several pieces to be crocheted. The crocheting of the pieces took time and thought, especially for the queen bee. Luckily, I only needed one queen bee. Because of the detail in these bees, they took more time and thought to stitch together as well. To complete their eyes, I spent a couple of hours cutting tiny black felt dots and then had to have a glue party with the husband to get the tiny felt dots attached to the white crocheted bases. But, in the end, all this extra work and thought paid off. The queen and her worker bees turned out fantastic. And I think they are just so funny.

Bees4Bees3Thanks to the husbands wonderful ideas and photography skills, I have a great spring diorama of my bees to be sent out with my Spring Fling cards. We bought a vase, some silk flowers and a few wooden dowels, and photographed the bees on a green back ground. We had a fun time together arranging the bees in various poses and taking their pictures. Then the husband went to work and photoshopped the dowels out of the pictures and created me a fun springtime photo of my bees.

My spring fling with the bees was now over and I had had a great time making each bee. And I now have a fun spring display of flowers and bees and some great photos of my work.

Until next time, Crochet forth and crochet on!

Bugs and Bunnies and Hearts, oh my!

P1030086Happy Valentines Day!

.

I wonder what I should get for my valentine this year? A card? Perhaps some candy? How about a love bug or a love bunny?

.

While I was surfing on Ravelry.com recently, I found several fun patterns for Valentine’s Day and so I decided to try a couple of them out. The first was a bunny pattern. It looked just like a giant gummy bear bunny! In PINK no less! The picture on the pattern was so cute, I knew that this might be a possible gift for my valentine. And so I promptly ignored the instructions on the pattern as to the size of hook and yarn that I should use, and instead I picked up my size G hook and Red Heart yarn and started to crochet it. I have done this before and the project has turned out just fine if not great, I thought to myself as I P1030084was remembering my previous project of escargot the snail. Well, this time I was not to be so lucky. As I crocheted, the bunny just kept getting bigger and bigger. All of the cuteness was draining from the bunny with each stitch I took, but still I continued to crochet it anyway. When the 4 pieces of the bunny were all crocheted up, I did not like the size it had turned out at all. I debated about not spending the time or stuffing to stitch him together, but I decided to continue on hoping that after being stuffed and stitched some of the cuteness would return. But it didn’t. I then stitched in the bunnies face in black yarn, but it looked so harsh on the pink that I took it out and stitched it again in brown. Compared to the picture, this bunny was just not the cute little love bunny I wanted to give to my valentine. I debated about making another bunny with the correct size of hook and yarn that the pattern called for, but I was tired of the pattern already and I just wanted to move on.

.

P1030087With that decision past me, I decided to give the love bug pattern I had found along with the bunny a try next. It called for a size G hook and red and pink yarn and that is what I already had handy, so I was all set. It’s four parts crocheted up quickly. I thought I would have a problem with the heart wings but they were quite easy to make. I could tell as soon as the parts were crocheted that this little love bug was going to be just as cute as the picture had shown it, and it would be a fine gift for my valentine. The details of the bugs details with the pipe cleaner antennas and the placement of the heart wings, took some time to decide on, but were well worth the time and it turned out very cute. Once my first love bug was done, I thought it was just adorable and so fun to make that I decided to make another. For the second one I used a size F hook and different colors, just to see what I got. The results were just as cute as the first. The size of the hook used did not seem to make much of a difference. And it was fun to make the pattern again. Because the detail decisions had already been made on the first bug, the second love bug in white, worked up very quickly. I did not crochet the stripes in the white love bugs body as I had the first one, and when he was done, he was so white that I went ahead and added the dashed lines of red to his body. I like the look of it and it breaks up the solid white body nicely.

.

P1020879I wanted both the bunny and the bugs to stand up by themselves so I added some pony beads to the bottom of their bodies to give them some bottom weight before I stuffed them. The bunny was going to need a lot of beads for weight to stand up, so I made a little pouch first to hold the beads together in the bottom and to hide the color of the beads. I did not really worry about matching the size of the bottom too closely or how round or neat the pouch looked since no one would ever see it but me, so the pouch was simple and quick to make. And it worked out great! Because the pouch of beads worked so well in the bunny, I made another pouch for the beads in the pink bug too. It worked just as well as the bunny’s pouch had. On the white bug though I just added the beads to the bottom of the bug without a pouch. There is only about 10 beads in the bottom of the bugs so I wanted to see if it made a difference, pouch or no pouch. I also had white colored beads so I did not have to worry about the color of them showing through the yarn on the white bug. I don’t really see much difference between the two bugs as far as the weight goes. This has led me to concluded that if the amigurumi is small, it doesn’t matter if the weights are in a pouch or not, but I believe that the bunny due to its larger size is better off with its beads in a pouch so they stay in place in it’s bottom.

.

And now that  my gifts are all ready for my valentines this year, will you, will you be mine?